Attract Mode with RetroPie - Alternative to EmulationStation

Finhead

ok, i just realised i've been trying to run this on a pi B,
stupid me!!!

Here incase you missed it
Image for RP1+2

InsecureSpike

@InsecureSpike said:

ok, i just realised i've been trying to run this on a pi B,
stupid me!!!

Here incase you missed it
Image for RP1+2

yup thought I was using my pi 2 b!

now I am, and have Floobs img working! yay!!

robertybob

So just to confirm, Floob's image doesn't have the RetroPie emulators (i.e Libretro) set up already within AM?

Finhead

@robertybob said:

So just to confirm, Floob's image doesn't have the RetroPie emulators (i.e Libretro) set up already within AM?

Even if it's not, which I believe it might have 1 setup but not 100% since I didn't use his image. IF you go to approx 55:20 on the video he shows you how to setup the mame emulator in retoarch.
IT's very easy to setup emulators.

You guys should really make time and watch his video, he was nice enough to spend the time to do one. Super awesome of him. ;)

robertybob

@Finhead Oh don't worry I did watch it ;) Might have been me being dumb but I couldn't tell if the image did or did not have all of the RP emulators set up.

Floob

@robertybob said:

So just to confirm, Floob's image doesn't have the RetroPie emulators (i.e Libretro) set up already within AM?

It has a couple setup (mame2003 and genesis-plus-gx), but the next image will have the vast majority added (as well as other improvements). I'll set the artwork paths up as well. Obviously all the emulators are already there, but the AM config isnt setup for them yet. As Finhead points out, its not too bad setting them up and there is an example on the vid.

Rion

Sorry to ask this again..

With this setup can you have both emulation station and Attract on the same image.

Attract started from Emulationstation,
Emulationstation started from Attract?

Something like Attract Mode on the homescreen in Emulation station and in Attract Mode?

ashmck73

Yes - you do end up with both EmulationStation and Attract Mode on the same image.

You can run either from the terminal by typing attract to start attract mode or typing emulationstation to start EmulationStation.

I'm sure there would be some way of running one from the other but that sounds like some scripting / programming work which is a tad beyond what I know.

BuZz

The duplicated config is a problem with our image, will correct for next version

senkun

@Rion said:

Sorry to ask this again..

With this setup can you have both emulation station and Attract on the same image.

Attract started from Emulationstation,
Emulationstation started from Attract?

Something like Attract Mode on the homescreen in Emulation station and in Attract Mode?

Yes, Floob built this image with Retropie as base, so it contains both ES and AM.

As it is now, when you boot up you log in to terminal. Then you can choose either to start ES by entering emulationstation from the command line, or start AM by entering xinit attract.

I believe you can have AM started from within ES as an sub-menu item under Ports, if you set it up that way. And with the new changes from Retropie 3.5^ it might be possible to have AM as a custom menu.

I have not played with this yet but I do believe you can start ES from within AM. AM provides an exit option where you can set a command, so perhaps it could be as simple as setting exit command to "emulationstation"

So yes, I think it would be entirely possible to autoboot into either AM or ES, and then launch into the other frontend from within each other.

Have a look here for more info;
https://github.com/RetroPie/RetroPie-Setup/issues/1071

Finhead

@senkun said:

@Rion said:

Sorry to ask this again..

With this setup can you have both emulation station and Attract on the same image.

Attract started from Emulationstation,
Emulationstation started from Attract?

Something like Attract Mode on the homescreen in Emulation station and in Attract Mode?

Yes, Floob built this image with Retropie as base, so it contains both ES and AM.

As it is now, when you boot up you log in to terminal. Then you can choose either to start ES by entering emulationstation from the command line, or start AM by entering xinit attract.

I believe you can have AM started from within ES as an sub-menu item under Ports, if you set it up that way. And with the new changes from Retropie 3.5^ it might be possible to have AM as a custom menu.

I have not played with this yet but I do believe you can start ES from within AM. AM provides an exit option where you can set a command, so perhaps it could be as simple as setting exit command to "emulationstation"

So yes, I think it would be entirely possible to autoboot into either AM or ES, and then launch into the other frontend from within each other.

Have a look here for more info;
https://github.com/RetroPie/RetroPie-Setup/issues/1071

IT's not as easy as "emulationstation" , I tried that. It needs to have a script writen I believe to take it to the command prompt and then "emulationstation" I have no idea how to do this so that's where I have stopped my search.
I wanted to exit to ES to run Daphne games since you can set them all up in one emulator, on AM you need to setup individual emulators for each game.

BTW AM should boot direct if you change your profile.d/10-emulationsation.sh to xinit attract

Rion

@Finhead said in Attract Mode with RetroPie - Alternative to EmulationStation:

@senkun said:

@Rion said:

Sorry to ask this again..

With this setup can you have both emulation station and Attract on the same image.

Attract started from Emulationstation,
Emulationstation started from Attract?

Something like Attract Mode on the homescreen in Emulation station and in Attract Mode?

Yes, Floob built this image with Retropie as base, so it contains both ES and AM.

As it is now, when you boot up you log in to terminal. Then you can choose either to start ES by entering emulationstation from the command line, or start AM by entering xinit attract.

I believe you can have AM started from within ES as an sub-menu item under Ports, if you set it up that way. And with the new changes from Retropie 3.5^ it might be possible to have AM as a custom menu.

I have not played with this yet but I do believe you can start ES from within AM. AM provides an exit option where you can set a command, so perhaps it could be as simple as setting exit command to "emulationstation"

So yes, I think it would be entirely possible to autoboot into either AM or ES, and then launch into the other frontend from within each other.

Have a look here for more info;
https://github.com/RetroPie/RetroPie-Setup/issues/1071

IT's not as easy as "emulationstation" , I tried that. It needs to have a script writen I believe to take it to the command prompt and then "emulationstation" I have no idea how to do this so that's where I have stopped my search.
I wanted to exit to ES to run Daphne games since you can set them all up in one emulator, on AM you need to setup individual emulators for each game.

BTW AM should boot direct if you change your profile.d/10-emulationsation.sh to xinit attract

Hopeful that some bin/bash guru can solve this. I don't mind if it drops to the console with a few lines and then starts attract mode from within Emulationstation and the other way around.

Then you can choose what you want to starts first with profile.d/10-emulationsation.sh or 10-default-frontend.sh

zerojay

https://github.com/zerojay/RetroPie-Extra/tree/master/scriptmodules/supplementary

Shakz

Gui method of switching to and from emulationstation and attract mode:
I came up with a solution for this a few days ago.
I wrote a quick and dirty script to help you setup the same thing on your pi.
This will create a "scripts" section on attract mode. In there it will give you a script to reset the default front end and reboot.
"Launch EmulationStation to Configure Controllers"
This will put you in emulationstation after the reboot.
Under RetroPie I added a script to put you back into attract mode.
" Switch To Attract Mode"

To install just run the following on your pi. It only takes a second. Feel free to look at the code. Its nothing fancy.

cd
wget http://eazyhax.com/downloads/attract/installswitchAM.sh
chmod 755 installswitchAM.sh
./installswitchAM.sh

Hope this helps yall!

Finhead

@Shakz said in Attract Mode with RetroPie - Alternative to EmulationStation:

Gui method of switching to and from emulationstation and attract mode:
I came up with a solution for this a few days ago.
I wrote a quick and dirty script to help you setup the same thing on your pi.
This will create a "scripts" section on attract mode. In there it will give you a script to reset the default front end and reboot.
"Launch EmulationStation to Configure Controllers"
This will put you in emulationstation after the reboot.
Under RetroPie I added a script to put you back into attract mode.
" Switch To Attract Mode"

To install just run the following on your pi. It only takes a second. Feel free to look at the code. Its nothing fancy.

cd
wget http://eazyhax.com/downloads/attract/installswitchAM.sh
chmod 755 installswitchAM.sh
./installswitchAM.sh

Hope this helps yall!

Just tried this out, it works great for a one click solution. But it's much faster to just exit to command line and type "xinit attract" or "emulationstaion" no need for a full reboot.
Is there a way to make the script run from command line rather than a full reboot?

Rion

@Shakz

Great job man!

This is exactly what i needed.
The less i have to pull up the keyboard the better.

Great for my son to :)

robertybob

@Shakz Thanks, I'll give this a go. Just installed it via RetroPie-Extra but forgot to install X ! Whoops!

Floob

@robertybob
Have you run Attract Mode at least once before installing the script?

@Shakz Is it ok if I include your script in my next image?

Shakz

@Floob Absolutly man. Thanks for all you contribute to this project. I use your stuff all the time. Glad you can use some of mine.

Thanks everyone else. Glad the script is working out.

Shakz

@Finhead Well the problem is that if you call a script from x then kill x....the script dies. Attract runs in X.....I dont see any issues from the emulationstation side.....its nice and clean. Gotta figure a way around it. Perhaps calling it with nohup would work?