Can't edit boot/config.txt

[AlexMurphy]

@bradleyhollander That is odd. I Would re-download the image and burn it again to a newly formatted SD card just to be sure. Sometimes stuff just goes wrong. Never assume anything!

[bradleyhollander]

Could it be my sd card because I have tryed formatting it and flashing the .img twice. but I'm still left with no image coming on when I plug in a screen and power into my pi

[AlexMurphy]

@bradleyhollander Is the green LED lighting up?

[bradleyhollander]

I will try again maby it works on try number 3

[DarkWolf]

otherwise try another sd card

[AlexMurphy]

@bradleyhollander Before you do that, plug it in. Is the green LED flashing at all?

[bradleyhollander]

@AlexMurphy yes it flashes in quick succeshion

[AlexMurphy]

@bradleyhollander That means it is working. What sort of display is it connected to? Try a different TV or a different HDMI cable.

[DarkWolf]

@bradleyhollander the power supply could also be a problem
use one with a minimum of 1A output

[bradleyhollander]

@AlexMurphy I use a old Vga screen with a hdmi adapter

[AlexMurphy]

@bradleyhollander Your adaptor is not compatible, sorry.

[DarkWolf]

Ok that is the problem
The vga adapter disables the hdmi auto detection of your monitor
this can be resolved somehow, let me look into my old pi, I made it there somehow

[DarkWolf]

Ok so what you have to do:

1. connect via ssh over network (you need a console for this, however you get to it)
2. type

sudo nano /boot/config.txt

3. Remove the # in front of

hdmi_force_hotplug=1

4. press ctrl+x, enter and than y,enter to save the file
5. restart your pie with

sudo reboot

if you get no output:
Remove the # in front of

hdmi_safe=1

as well and reboot

Now the hdmi port is forced to be activated and outputting at any time.
This diables composite output, but I guess you don't want to use it.

Hope that helps

[bradleyhollander]

Composit the yellow plug?

[DarkWolf]

@bradleyhollander yeah, I guess that was it

[DarkWolf]

One important thing left:
As the hdmi safe mode is disabled, it could happen that the pi overheats, so keep an eye on it ;-)

I found a great thread for this, so if you need more information you can probably look it up here.

[bradleyhollander]

@DarkWolf can I do this by editing the config.txt on the sd card

[DarkWolf]

@bradleyhollander the config.txt file is located on the boot partition of the sd card
you can find the config.txt file at the root

Edit:
Another addition:
First remove the # of

hdmi_force_hotplug=1

and try it out, if you get no output remove the # of

hdmi_safe=1

[bradleyhollander]

Should I rather get a Vga to composit converter ?

[AlexMurphy]

@bradleyhollander I'm sorry. I can't help you. I only use HDMI screens.