Re-write image every time

[TheBear123]

@xeon Kinda. They both take power from a branch, wich is full

[Xeon]

@thebear123 I don't understand sorry.

[simonster]

@thebear123

Can you please fill in the grid from https://retropie.org.uk/forum/topic/3/read-this-first , to make it simple I have included it below:

Pi Model or other hardware: (B, B+, 2 B, 3, X86 PC etc..)
Power Supply used: (If using a Pi)
RetroPie Version Used (eg 3.6, 3.8.1, 4.1 - do not write latest):
Built From: (Pre made SD Image on RetroPie website, Berryboot, or on top of existing OS etc.. - please provide the filename of any image used)
USB Devices connected:
Controller used:
Error messages received:
Log found in /dev/shm/runcommand.log (if relevant):
Guide used: (Mention if you followed a guide)
File: (File with issue - with FULL path)
Emulator: (Name of emulator - if applicable)
Attachment of config files: (PLEASE USE PASTEBIN.COM FOR LARGE LOGS)
How to replicate the problem:

[edmaul69]

@thebear123 can you give me the model number and brand of the monitor? We could help you set the correct resolution if we knew more about the monitor

[TheBear123]

@edmaul69 It's a DELL E193FPc 19" monitor

[TheBear123]

@edmaul69 It has a 1280X1024 at 75 Hz resolution

[edmaul69]

@thebear123 so you need to open up /boot/config.txt and change your hdmi_mode and hdmi_group to this:

hdmi_group=2
hdmi_mode=36

This is the setting for 1280x1024@75hz

[TheBear123]

@edmaul69 Didn't work

[dudleydes]

@thebear123 Could you uncomment the following line in /boot/config.txt?

hdmi_force_hotplug=1

This should force a HDMI mode even though your monitor doesn't support it.

[TheBear123]

@dudleydes THANK YOU THANK YOU THANK YOU! IT WORKED