Can't skip joystick configuration
-
I have usb joystick and when I start the emulationstation for the first time, the joypad config runs. The joystick has 1 button and I configure the directions and the button ok, but when I get to the second button configuration (which I don't have) I can't skip it. The instructions say you could skip this by pressing any key, I tried pressing the joystick button and all the keyboard buttons for a while, but no skipping.
I can exit the config with F4, but no configuration is saved.
Version info is:
Version 2.0.1a, built Apr 26 2016 - 08:54:30 -
@kimurantti holding down your joystick button for 3 seconds didn't skip it?
-
Skip the buttons you don't have by pressing any key, actually it means press and hold down any key and it will skip to the next, repeat until it gets to the end and save.
-
@herb_fargus said in Can't skip joystick configuration:
@kimurantti holding down your joystick button for 3 seconds didn't skip it?
Nope, nothing happens when I hold down the joystick button or any of the keyboard buttons. Except F4, which exits ES.
Here's the es_log:
jabba@jabba-Linux:~/.emulationstation$ cat es_log.txt lvl2: EmulationStation - v2.0.1a, built Apr 26 2016 - 08:54:30 lvl2: Creating surface... lvl2: Created window successfully. lvl2: Added unconfigured joystick USB Gamepad (GUID: 03000000790000001100000010010000, instance ID: 0, device index: 0). lvl2: Added unconfigured joystick USB Gamepad (GUID: 03000000790000001100000010010000, instance ID: 1, device index: 1). lvl2: Checking available OpenGL extensions... lvl2: ARB_texture_non_power_of_two: ok lvl2: Loading system config file /home/jabba/.emulationstation/es_systems.cfg... lvl2: Parsing XML file "/home/jabba/.emulationstation/gamelists/c64/gamelist.xml"... lvl1: Error - folder with path ""/home/jabba/roms/nes"" is not a directory! lvl2: Parsing XML file "/home/jabba/.emulationstation/gamelists/nes/gamelist.xml"... lvl1: System "nes" has no games! Ignoring it. lvl2: Configuring device 1 (USB Gamepad ). lvl2: Mapping [Axis 1-] -> Up lvl2: Mapping [Axis 1+] -> Down lvl2: Mapping [Axis 0-] -> Left lvl2: Mapping [Axis 0+] -> Right lvl2: Mapping [Button 0] -> A lvl2: EmulationStation cleanly shutting down. -
and if you hold a direction on the joystick ? Can you test with another controller ? it might be a hardware issue. I can't reproduce it here on either a keyboard or a usb gamepad. Also how did you skip configuration of start / select (which appear before A)
Also https://retropie.org.uk/forum/topic/3/read-this-first (Helps if you provide more details)
-
@BuZz said in Can't skip joystick configuration:
and if you hold a direction on the joystick ? Can you test with another controller ? it might be a hardware issue.
Also https://retropie.org.uk/forum/topic/3/read-this-first (Helps if you provide more details)
Sorry, you're right, I could've provided a bit more info. I have a Logitech keyboard / mousepad combo (k400r) attached and two retrolink usb joysticks (atari clone type, one button joysticks). I'm running latest Ubuntu and ES is version 2.0.1a+r272~3~ubuntu16.04.1. I don't get any error messages.
Nothing happens when I hold directions either. The joysticks work ok in e.g. Vice with C64 games, when I tried that. The skipping doesn't work with my PSX gamepads either, otherwise adding controls / buttons works ok.
Thanks!
-
Are you running RetroPie ? You are running RetroPie from a source install on a PC ? or ?
-
I'm actually not running RetroPie, I just did an emulationstation test install on my Kodi PC box to see how it works. Hope this is not totally wrong forum for this question.
-
You are welcome to ask, but this is actually a forum for RetroPie, so it would have been useful to make that clear in your post. The RetroPie Emulation Station has some customisations and also runs on a newer SDL2 than is available by default in Ubuntu (Actually, installing RetroPie from source on Ubuntu on a PC uses the system SDL, but the ES is still customised)
You can try installing RetroPie on your Ubuntu machine and see if that works any differently for you - https://github.com/retropie/retropie-setup/wiki/RetroPie-Ubuntu-16.04-LTS-x86-Flavor
-
Ah, I see :) .. I guess there's no way of installing RetroPie on a regular PC? Or just the customisations? I guess I could try to build the latest version from git if that would maybe fix the issue..
-
You can - I linked it in the post above.
-
Sorry, not sure which post you mean?
-
The post before yours. Perhaps you missed it because I added it after.
Here:
You can try installing RetroPie on your Ubuntu machine and see if that works any differently for you - https://github.com/retropie/retropie-setup/wiki/RetroPie-Ubuntu-16.04-LTS-x86-Flavor
-
Thanks for the link. But I just realized, I guess I can only skip the 'page up' and 'page down' buttons, the 'b' button cannot be skipped. At least there's no 'hold any button to skip' message. Does this mean emulationstation cannot be used with my 1-button joysticks?
-
You can skip the B button or at least I was able to. However, you will need another input device to control Emulation Station properly (and to exit from RetroArch emulators). Eg a keyboard.
-
I was able to get past the controller config with the psx controller, so now I'm able to set the keyboard as the default, hopefully. I ran into some other issues and will test later to see if I can have the joystick plugged in and still use the keyboard. Thanks for the help!
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.