Ultimarc A-Pac with 5k Potentiometers

1500points

Cool, I didn't realize old manuals were available like that one.
Someone on KLOV sells Atari slip clutch pots but they are $25 US apiece. I don't think that will solve this particular issue about reaching the ends of the field, though.

caver01

@1500points I am away from my system for the day, but does that mean the "rocks" that fall on the sides are un-catchable?

1500points

@caver01 said in Ultimarc A-Pac with 5k Potentiometers:

@1500points I am away from my system for the day, but does that mean the "rocks" that fall on the sides are un-catchable?

correct, the first column of rocks and the last column of rocks. the edge of the player's "bucket" won't reach so they just fall to the ground.

caver01

@1500points Well, I tried it in both advancemame and lr-mame2003 and they both work fine with my spinner in this game. No problems hitting the hard edge of the screen. I kinda suck at that game, but the edges are within reach. It makes me wonder if there is a way to expand the range or calibrate the max and min values on your controller board.

In a two player game you share the same spinner, but that is probably perfectly emulating the way the game works. The game only ever had but one control, two serve buttons and Players 1 and 2 start buttons.

biglouieuk

@1500points said in Ultimarc A-Pac with 5k Potentiometers:

--hit f4, type sudo nano /opt/retropie/configs/mame-advmame/advmame.rc
---p1 paddle set to joystick[1,0,0]

hi all..

I was doing a little more testing tonight, to try and understand all the elements, slow progress but learning, and the guide above is brilliant, thanks again for taking the time to share it.

I was wondering, in the .rc file are we looking to change

input_map[p1_paddlex] //replacing "auto" with "joystick[1,0,0]"

did you add the same to player1 paddley in your set up? I am testing both and finding no good news at the moment, so trying to narrow things down.

best

Rob

1500points

@biglouieuk, here is specifically what is in the .rc files to make the a-pac setup work:
input_map[p1_paddlex] joystick[1,0,0]
input_map[p2_paddlex] joystick[1,0,1]
input_map[p3_paddlex] joystick[2,0,0]
input_map[p4_paddlex] joystick[2,0,1]

you might want to run the input test to make sure yours is seen the same way, and double check how you wired the pots to the a-pac since that would vary the details.
In my case, the 1 and 2 in the first entry designate joystick 1 or 2 on apac.
the 0 in the middle digit just means joystick
and the last digit is 0 for x axis, 1 for y axis

@caver01 I'm setting up a fresh image for use with a turbo twist 2 spinner which will tell me if avalanche behaves differently with a different device.
did you just make the paddle 1 x set to the mouse[xxxx] entries in the .rc file?

caver01

@1500points These are the relevant entries from my .rc file:

device_raw_mousedev[0] /dev/input/mouse0
device_raw_mousedev[1] /dev/input/mouse1
device_raw_mousedev[2] /dev/input/mouse2
device_raw_mousetype[0] ps2
device_raw_mousetype[1] ps2
device_raw_mousetype[2] ps2

input_map[p1_dialx] mouse[0,x] mouse[1,x] mouse[2,x]

input_map[p1_paddlex] mouse[0,x] mouse[1,x] mouse[2,x]
input_map[p1_paddley] mouse[0,y] mouse[1,y] mouse[2,y]

input_map[p1_stickx] mouse[0,x] mouse[1,x] mouse[2,x]

input_map[p1_trackballx] mouse[0,x] mouse[1,x] mouse[2,x]
input_map[p1_trackbally] mouse[0,y] mouse[1,y] mouse[2,y]
input_map[p2_dialx] -mouse[0,y] -mouse[1,y] -mouse[2,y]

input_map[p2_stickx] -mouse[0,y] -mouse[1,y] -mouse[2,y]

input_map[p2_trackballx] mouse[0,x] mouse[1,x] mouse[2,x]
input_map[p2_trackbally] mouse[0,y] mouse[1,y] mouse[2,y]

1500points

OK, used your Mouse setup for the X entries.
Avalanche in AdvMAME works just fine with the Turbo Twist 2. The bucket moves farther to the edges than it does using the A-Pac/Pot device input.

So that particular title is a good one for Spinners (Mouse) instead of Paddle (Pots)

caver01

@1500points Yeah, but what I cannot tell is whether that game is using the Paddle input, or the Dial input, as I have both mapped. Do you know? Perhaps Dial works better (or differently) than Paddle? I am away from my Pi, otherwise I could test by dropping a few input_maps out of the file to see what it uses/needs.

caver01

Maybe just TAB and look at the input GUI menu and it will say what the control is. I suppose you might already know.

1500points

Tempest is Dial, Avalanche is listed as Paddle in the TAB GUI

caver01

@1500points Ok, I figured. My configuration in AdvanceMAME is a catch-all, as you can see. I have all inputs mapped to mouse0 1 and 2 so everything works for every ROM. There was a time, however, when I was using AdvanceMAME to run Golden Tee. For these titles, I had to specify a ROM prefix on lines to override like this:

gt2k/input_map[p1_trackbally] mouse[0,y]

For this one ROM (and several other lines like it for other ROMs) I dropped all but one of the mouse inputs for the trackball Y-axis. This was because I did not want players to CHEAT by using the spinner instead of the trackball to make a perfectly straight shot!

Anyway, this probably doesn't solve your POT/Paddle distance issue, but you could do something similar by ROM so that certain games retain your existing paddle input map while other titles can have a line to override to a mouse device.

1500points

Cool. I wondered how that could be broken out per game.
I've kind of given up on doing too many game styles on a mini standalone build. So I just do custom setup per the box. The Warlords will probably be just Warlords and Super Breakout.

For the TT2 spinner, I confirmed the main games I know about are able to work in Advance MAME (Major Havoc, Arkanoid, Kick/Kickman, Avalanche, Tempest) Time to make a new mini cab!

Now that leaves PONG. What's it take to get that playing from Pi.....

caver01

@1500points It has been a while since I looked at Pong. I tried to set it up at one point but ran into problems with it missing from supported ROMsets. It might be time to take a second look, but as I go through compatibility lists now, I don't see it. Maybe MAME (current) version has it? I dunno.

biglouieuk

Evening, a little more investigation this evening with the APAC and pots.. :-)

I have them moving in the advj looks good. but in advmame 0.94 Warlords, not so good.

I have it either left, right or in the middle. I don't get anything in the middle or any analogue in adv mame.

I have hit TAB in Warlords and the controls are set to be Paddle Dec j2:stick:x- and j2:stick:x+

Analogue controls in TAB are Paddle Digital Speed 200..

I'm, missing something, and Ive spent a few hours trying to work out what! :-)

caver01

@biglouieuk What you are missing is the fact that you cannot configure the actual analog control mapping in the TAB menu. You can only adjust sensitivity of existing inputs that need to be mapped in the .rc file. The speed and digital controls are there for people who don't have paddles/spinners/trackballs. It allows you to set how fast a switching joystick, for example, simulates the turn of a wheel, or a spin, etc.

caver01

@1500points I was looking briefly at the APAC page and seeing that you can calibrate the inputs. Specifically, it says, "If you are using controls which don'tcover the entire range of travel of the pot, you will need to calibrate thecontrol. All you need to do is click on "ControlPanel", "Game Controllers", and then highlight the upper or lower entry for "A-PACInterface", and follow the instructions. This will ensure that a full movementof the control device corresponds to a full movement in the game."

Is that not the problem you were running into with Avalanche? What I don't know is if the configured range is saved to the APAC or if it is a lookup/translation held in windows somewhere. If Windows, that would suck, but if it saves the calibration on the APAC, it would fix your Avalanche limits. Have you tried this?

biglouieuk

@caver01 Thanks for the reply..I've configured in the rc file, and can see it working in advj...

Its in mame that it doesnt seem to want to work as analogue..Hence why i was messing about with the settings in TAB, to investigate if it was a mame setting..

The Game settings are all set to j2:stick:x- and then plus..Assume thats from the .rc file..

I'm not understanding something for sure!

caver01

@biglouieuk Ok, sorry, I guess that makes sense, as you were writing about the .rc above.

I am a bit out of my depth because I don't use the APAC nor pots, but are you getting a variety of input values from advj? If you aren't getting any scale of values from pots, it might be behaving like a digital input. I just posted a note above about calibration which is a thought.

biglouieuk

@caver01 thanks and yup, getting analogue number changes in the advj tool.

I'll spend some more time today, see what I can work out. I thought it might be connected with @1500points comment about having settings in .rc and then some rogue settings in the TAB GUI. Seems like a good first start.

I've also ordered some optical rotational encoders and the optipac, so I'll be looking into that setup when it all arrives...

For now, more investigation.

EDIT: Editing the correct advmame.rc file is a useful thing to do! Pots now work for me, thank you so much @1500points for all the work you did on this, I wouldn't have worked this out!!