Scummvm controller help

bassman6805

I don't know if it has a name. Here is what is in the config file.

Keyboard input, Joypad and Joyaxis will all obey the "nul" bind, which disables the bind completely,

rather than relying on a default.

input_player1_a = "z"
input_player1_b = "x"
input_player1_y = "a"
input_player1_x = "s"
input_player1_start = "enter"
input_player1_select = "escape"
input_player1_l = "q"
input_player1_r = "w"
input_player1_left = "left"
input_player1_right = "right"
input_player1_up = "down"
input_player1_down = "up"

input_player1_l2 =

input_player1_r2 =

input_player1_l3 =

input_player1_r3 =

This is also the controller I am using. It works fine for everything else.

0_1508789863971_Pi 3 resize.jpg

ExarKunIv

@bassman6805

hmmm
well for mapping you need a bit more.

you need to run this first so you can get the info that is needed

cat /proc/bus/input/devices will pull up something like this.


I: Bus=0005 Vendor=2dc8 Product=3810 Version=0100
N: Name="8Bitdo FC30 Pro"
P: Phys=b8:27:eb:47:c7:78
S: Sysfs=/devices/platform/soc/3f201000.uart/tty/ttyAMA0/hci0/hci0:11/0005:2DC8:3810.0005/input/input6
U: Uniq=e4:17:d8:7a:6a:7d
H: Handlers=js2 event6
B: PROP=0
B: EV=1b
B: KEY=ffff0000 0 0 0 0 0 0 0 0 0
B: ABS=30627
B: MSC=10

ls /dev/input/by-id/ will look like this


pi@retropie:~ $ ls /dev/input/by-id/
usb-1d57_ad02-event-kbd         usb-_Mini_Keyboard-event-kbd
usb-1d57_ad02-if01-event-mouse  usb-_Mini_Keyboard-if01-event-mouse
usb-1d57_ad02-if01-mouse        usb-_Mini_Keyboard-if01-mouse

evtest /dev/input/event[•] will pull this

Input driver version is 1.0.1
Input device ID: bus 0x5 vendor 0x2dc8 product 0x3810 version 0x100
Input device name: "8Bitdo FC30 Pro"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 304 (BTN_SOUTH)
    Event code 305 (BTN_EAST)
    Event code 306 (BTN_C)
    Event code 307 (BTN_NORTH)
    Event code 308 (BTN_WEST)
    Event code 309 (BTN_Z)
    Event code 310 (BTN_TL)
    Event code 311 (BTN_TR)
    Event code 312 (BTN_TL2)
    Event code 313 (BTN_TR2)
    Event code 314 (BTN_SELECT)
    Event code 315 (BTN_START)
    Event code 316 (BTN_MODE)
    Event code 317 (BTN_THUMBL)
    Event code 318 (BTN_THUMBR)
    Event code 319 (?)
  Event type 3 (EV_ABS)
    Event code 0 (ABS_X)
      Value    128
      Min        0
      Max      255
      Flat      15
    Event code 1 (ABS_Y)
      Value    127
      Min        0
      Max      255
      Flat      15
    Event code 2 (ABS_Z)
      Value    128
      Min        0
      Max      255
      Flat      15
    Event code 5 (ABS_RZ)
      Value    127
      Min        0
      Max      255
      Flat      15
      Resolution      46
    Event code 9 (ABS_GAS)
      Value      0
      Min        0
      Max      255
      Flat      15
    Event code 10 (ABS_BRAKE)
      Value      0
      Min        0
      Max      255
      Flat      15
    Event code 16 (ABS_HAT0X)
      Value      0
      Min       -1
      Max        1
    Event code 17 (ABS_HAT0Y)
      Value      0
      Min       -1
      Max        1
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
Properties:
Testing ... (interrupt to exit)

bassman6805

Ok. The only thing connected is a wireless usb hub. Here is what I get for the first one.

I: Bus=0003 Vendor=0001 Product=0001 Version=0001
N: Name="retrogame"
P: Phys=
S: Sysfs=/devices/virtual/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=1680 0 3000 d0030002

The second and third commands I get "no such file or directory".

bassman6805

I figured out the third command and got these results.

bassman6805

Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x1 product 0x1 version 0x1
Input device name: "retrogame"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 1 (KEY_ESC)
Event code 16 (KEY_Q)
Event code 17 (KEY_W)
Event code 28 (KEY_ENTER)
Event code 30 (KEY_A)
Event code 31 (KEY_S)
Event code 44 (KEY_Z)
Event code 45 (KEY_X)
Event code 103 (KEY_UP)
Event code 105 (KEY_LEFT)
Event code 106 (KEY_RIGHT)
Event code 108 (KEY_DOWN)
Properties:
Testing ... (interrupt to exit)
Event: time 1508808873.707404, type 1 (EV_KEY), code 108 (KEY_DOWN), value 1
Event: time 1508808873.707404, -------------- EV_SYN ------------
Event: time 1508808873.984816, type 1 (EV_KEY), code 108 (KEY_DOWN), value 0
Event: time 1508808873.984816, -------------- EV_SYN ------------
Event: time 1508808878.052055, type 1 (EV_KEY), code 103 (KEY_UP), value 1
Event: time 1508808878.052055, -------------- EV_SYN ------------
Event: time 1508808878.303562, type 1 (EV_KEY), code 103 (KEY_UP), value 0
Event: time 1508808878.303562, -------------- EV_SYN ------------
Event: time 1508808880.872279, type 1 (EV_KEY), code 105 (KEY_LEFT), value 1
Event: time 1508808880.872279, -------------- EV_SYN ------------
Event: time 1508808881.057428, type 1 (EV_KEY), code 105 (KEY_LEFT), value 0
Event: time 1508808881.057428, -------------- EV_SYN ------------
Event: time 1508808881.748917, type 1 (EV_KEY), code 106 (KEY_RIGHT), value 1
Event: time 1508808881.748917, -------------- EV_SYN ------------
Event: time 1508808881.916709, type 1 (EV_KEY), code 106 (KEY_RIGHT), value 0
Event: time 1508808881.916709, -------------- EV_SYN ------------
Event: time 1508808883.058113, type 1 (EV_KEY), code 1 (KEY_ESC), value 1
Event: time 1508808883.058113, -------------- EV_SYN ------------
Event: time 1508808883.261601, type 1 (EV_KEY), code 1 (KEY_ESC), value 0
Event: time 1508808883.261601, -------------- EV_SYN ------------
Event: time 1508808884.043804, type 1 (EV_KEY), code 28 (KEY_ENTER), value 1
Event: time 1508808884.043804, -------------- EV_SYN ------------
Event: time 1508808884.194038, type 1 (EV_KEY), code 28 (KEY_ENTER), value 0
Event: time 1508808884.194038, -------------- EV_SYN ------------
Event: time 1508808886.715256, type 1 (EV_KEY), code 30 (KEY_A), value 1
Event: time 1508808886.715256, -------------- EV_SYN ------------
Event: time 1508808886.910315, type 1 (EV_KEY), code 30 (KEY_A), value 0
Event: time 1508808886.910315, -------------- EV_SYN ------------
Event: time 1508808887.382060, type 1 (EV_KEY), code 45 (KEY_X), value 1
Event: time 1508808887.382060, -------------- EV_SYN ------------
Event: time 1508808887.557515, type 1 (EV_KEY), code 45 (KEY_X), value 0
Event: time 1508808887.557515, -------------- EV_SYN ------------
Event: time 1508808889.027526, type 1 (EV_KEY), code 44 (KEY_Z), value 1
Event: time 1508808889.027526, -------------- EV_SYN ------------
Event: time 1508808889.185223, type 1 (EV_KEY), code 44 (KEY_Z), value 0
Event: time 1508808889.185223, -------------- EV_SYN ------------
Event: time 1508808889.755801, type 1 (EV_KEY), code 31 (KEY_S), value 1
Event: time 1508808889.755801, -------------- EV_SYN ------------
Event: time 1508808889.923615, type 1 (EV_KEY), code 31 (KEY_S), value 0
Event: time 1508808889.923615, -------------- EV_SYN ------------
Event: time 1508808891.277758, type 1 (EV_KEY), code 17 (KEY_W), value 1
Event: time 1508808891.277758, -------------- EV_SYN ------------
Event: time 1508808891.467049, type 1 (EV_KEY), code 17 (KEY_W), value 0
Event: time 1508808891.467049, -------------- EV_SYN ------------
Event: time 1508808892.993258, type 1 (EV_KEY), code 16 (KEY_Q), value 1
Event: time 1508808892.993258, -------------- EV_SYN ------------
Event: time 1508808893.232212, type 1 (EV_KEY), code 16 (KEY_Q), value 0
Event: time 1508808893.232212, -------------- EV_SYN ------------

ExarKunIv

@bassman6805

ok good the second one is not a big deal. so no worries

the next thing we need to do is start the mapping.

as you read in the guide you will need to make a runcommand-onstart.sh and runcommand-onend.sh

for runcommand-onend.sh you just need to follow what is in the guide, that will never change.

the runcommand-onstart.sh is the one that will change, i will help you out with the start, once you play with it a little then i can point out what needs to be done to get it going

[•] is where you will enter the keycode from your post above.
--evdev-keymap KEY_#304=a is how you will need to enter it.

#!/bin/sh
sudo killall > /dev/null 2>&1 xboxdrv
/opt/retropie/supplementary/xboxdrv/bin/xboxdrv > /dev/null 2>&1 \
     --evdev /dev/input/event0 \
    --silent \
    --detach-kernel-driver \
    --force-feedback \
    --deadzone-trigger 15% \
    --deadzone 4000 \
    --mimic-xpad \
    --evdev-absmap ABS_[•]=x1,ABS_[•]=y1,ABS_[•]=x2,ABS_[•]=y2,ABS_[•]=lt,ABS_[•]=rt,ABS_[•]=dpad_x,ABS_[•]=dpad_y \
    --evdev-keymap BTN_[•]=a,BTN_[•]=b,BTN_[•]=x,BTN_[•]=y,BTN_[•]=lb,BTN_[•]=rb,BTN_[•]=tl,BTN_[•]=tr,BTN_[•]=guide,BTN_[•]=back,BTN_[•]=start \
    &

so you have a anlog joystick on your controller? or is it just buttons

bassman6805

Thanks. I will work on it this evening when I get home. The controller is in the picture. It has an analog joystick and buttons. The buttons are from a super nintendo controller board I cut up and the analog joystick is from the raspberry pi store. Here is the guide to what I made.

https://learn.adafruit.com/super-game-pi

I don't think the joystick is an actual analog movement joystick. Looks like it's just up, down, left, right.

ExarKunIv

@bassman6805

ok cool

the only think that might be a hang up will be the fact is that you do no have any ABS or anglog movement which is used for the mouse movement.

but i think it still should work with just buttons, we will cross that when the time comes. if need be we can ask the god of keymapping.

bassman6805

I completed both steps of creating the runcommand-onend.sh and runcommand-onstart.sh. Based on what I posted above for my controller layout does this look correct for the keys?

--evdev-keymap KEY_#44=a,KEY_#45=b,KEY_#31=x,KEY_#30=y,KEY_#16=lb,KEY_#17=rb,BTN_[•]=tl,BTN_[•]=tr,BTN_[•]=guide,KEY_#1=back,KEY_#28=start
&

If so, where do I assign the keys for direction? According tho the results I got they would be keys 108, 103, 105, 106.

Thanks for your help.

ExarKunIv

@bassman6805
so far it is looking good
you can remove BTN_[•]=tl,BTN_[•]=tr,BTN_[•]=guide

for your d pad it will look like this BTN_TOP2=du,BTN_PINKIE=dr,BTN_BASE=dd,BTN_BASE2=dl
replace the BTN with your key number

as for getting it to work with the mouse im still looking it to

bassman6805

When I add the directions do they go in the same line as the others?

ExarKunIv

@bassman6805

yes.

you keep everything that goes with the first part in the same line.
--evdev-keymap is for keys and buttons.

bassman6805

Here is what I have for the onstart.sh

#!/bin/sh
if [ "$1" = "scummvm" ]
then
sudo killall > /dev/null 2>&1 xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv > /dev/null 2>&1
--evdev /dev/input/by-id/[•]
--silent
--detach-kernel-driver
--force-feedback
--deadzone-trigger 15%
--deadzone 4000
--mimic-xpad
--evdev-absmap ABS_[•]=x1,ABS_[•]=y1,ABS_[•]=x2,ABS_[•]=y2,ABS_[•]=lt,ABS_[•]=rt,ABS_[•]=dpad_x,ABS_[•]=dpad_y
--evdev-keymap KEY_#44=a,KEY_#45=b,KEY_#31=x,KEY_#30=y,KEY_#16=lb,KEY_#17=rb,KEY_#1=back,KEY_#28=start,KEY_108=du,KEY_106=dr,KEY_103=dd,KEY_105=dl
--axismap -Y1=Y1,-Y2=Y2
--ui-axismap x1=REL_X:10,y1=REL_Y:10
--ui-buttonmap b=BTN_LEFT,a=BTN_RIGHT,start=KEY_F5
--ui-buttonmap guide=void,x=void,y=void,lb=void,rb=void,tl=void,tr=void,lt=void,rt=void,back=void
--ui-axismap x2=void
&
fi

bassman6805

I'm still not getting anything to work. I am using scummvm sdl1 if that matters.

I also tried regular scummvm.

ExarKunIv

@bassman6805
you have most of it right but there are a few things that were needed
try this

#!/bin/sh
if [ "$1" = "scummvm" ]
then
sudo killall > /dev/null 2>&1 xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv > /dev/null 2>&1   \
--evdev /dev/input/event0 \
--silent \
--detach-kernel-driver \
--force-feedback \
--deadzone-trigger 15% \
--deadzone 4000 \
--mimic-xpad \
--evdev-keymap KEY_#44=a,KEY_#45=b,KEY_#31=x,KEY_#30=y,KEY_#16=lb,KEY_#17=rb,KEY_#1=back,KEY_#28=start,KEY_#108=du,KEY_#106=dr,KEY_#103=dd,KEY_#105=dl \
--ui-buttonmap b=BTN_LEFT,a=BTN_RIGHT,start=KEY_F5,dr=REL_X:25,dl=REL_X:-25,dd=REL_Y:25,du=REL_Y:-25 \
--ui-buttonmap guide=void,x=void,y=void,lb=void,rb=void,tl=void,tr=void,lt=void,rt=void,back=void \

&
fi

bassman6805

I'll give it a shot this evening. On a side note, how do you get the code to show up in the black box on here?

ExarKunIv

@bassman6805

before what you want in the box you put ```

and if you want red you put `

bassman6805

I pasted the code word for word but I still don't get any movement when I launch scummvm and the buttons do not seem to do anything either. Is there something else I can check? Would it help if I posted some settings or something?

bassman6805

I did find out that the xboxdrv was not installed. The original directions I found were old and the menus had changed. I figured out the location and installed it but still no controller response.

ExarKunIv

when you are running the game you can put this on the command line.

then
sudo killall > /dev/null 2>&1 xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv    \
--evdev /dev/input/event0 \
--silent \
--detach-kernel-driver \
--force-feedback \
--deadzone-trigger 15% \
--deadzone 4000 \
--mimic-xpad \
--evdev-keymap KEY_#44=a,KEY_#45=b,KEY_#31=x,KEY_#30=y,KEY_#16=lb,KEY_#17=rb,KEY_#1=back,KEY_#28=start,KEY_#108=du,KEY_#106=dr,KEY_#103=dd,KEY_#105=dl \
--ui-buttonmap b=BTN_LEFT,a=BTN_RIGHT,start=KEY_F5,dr=REL_X:25,dl=REL_X:-25,dd=REL_Y:25,du=REL_Y:-25 \
--ui-buttonmap guide=void,x=void,y=void,lb=void,rb=void,tl=void,tr=void,lt=void,rt=void,back=void \

&

this will force it to start and if there is any errors it will come up.

if it is working it will pop up something like this

xboxdrv 0.8.8 - http://pingus.seul.org/~grumbel/xboxdrv/
Copyright © 2008-2011 Ingo Ruhnke <grumbel@gmail.com>
Licensed under GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under certain
conditions; see the file COPYING for details.


Your Xbox/Xbox360 controller should now be available as:
  /dev/input/js2
  /dev/input/event4

Press Ctrl-C to quit

if nothing comes up then there is something else not working. i did try the mapping i gave you so i know there are no errors on it for my system at least