PSPi Version 2.0 - Raspberry Pi Zero in a PSP - Project is Now Complete!

adamspc

Some new pics are up

glennlake

@adamspc I give... Where can I see them? :-}

adamspc

@glennlake
I edited the original post instead of posting a new reply.
Also, as for the BOM...

This list is not 100% complete, but its a good start for now.

link deleted

glennlake

@adamspc thanks!

PingSpike

I said it before in the v1.0 thread but man, I have to say it again here too.

WOW!!!!

Your dedication and patience is simply incredible!

Thanks for documenting with photos, we all know how long this takes, I am very grateful, thank you mate :)

adamspc

@PingSpike
I really appreciate the kind words. I've posted some new photos. Hope you enjoy them.

pimpmaul69

I have to ask a question. Why are people modding psps to use pi zeros in. I mod all kinds of systems withe pi's and pi zeros but I have a psp go that can play far more than a pi zero can. It emulates ps1 games perfectly plays psp, neo geo, and others that the pi zero cant emulate so im just not sure why people are hacking up psp's to make it a lesser capable system??

scrappbrapp

holy bejeezuz mother of pearl.

I have nothing of intelligence to add to this.

If you gave me a kit with instructions, I'm sure I could make it... but I cant imagine being the creator.
Nothing of intelligence to add to this.

adamspc

@pimpmaul69
A broken PSP doesn't play any games at all. This takes a broken PSP and turns in into something new. The case it perfect for this project. The 4.3 inch LCD is far better for playing games than any Gameboy screen. The only purpose the PSP serves it to hold the components. This is more than just a game emulator too...its a computer. Anyone else wanna chime in?

glennlake

@pimpmaul69 You are assuming these PSPs are alive and working . Last I looked on eBay you can get a dead one for 3 bucks. If the case is in one piece it golden. Plus the satisfaction of building something of your own creation! My hat's off to all the hacker/builders here! I see adamspc is of the same mind.

moosepr

Yeah, it doesn't matter if it can't play PSP games, is just impressive you can shoehorn it all inside the casing! Do you have anything between the pi and the audio bits? I know you can reassign the gpio to get the audio signal, but does the amp act as the filtering circuit, or am i jumping a few steps?

glennlake

@moosepr Adafruit has an amp the takes the digital audio and converts it to analog. https://www.adafruit.com/products/3006. I haven't tried it yet but it's on order.

adamspc

@glennlake
I will have to look into this. If it doesn't take the pins I'm going to use for the joystick or controls then this might work pretty well. It looks like it could be using GPIO pins 18 and 13, which are the ones used for audio on the Pi. The price is definitely reasonable. the only down side is that it is mono and not stereo.

adamspc

@moosepr
The amp I'm using can be driven directly from the GPIO, but there is a little buzz in the speakers. I've wired capacitors between the GPIO and the amp and it cuts down on the buzzing substantially, but it also lowers the volume a little. Not too much of an issue since the volume level is still fine. I'm still tinkering with a filter and I'll post my results when I begin wiring the audio on this one.

adamspc

The post has been updated. Also, I moved all the pictures and most of the tutorial to Google Docs to reduce clutter on the forum. I hope everyone is happy with this change. The pics in Google Docs have also been resized because they were taking a while to load. 10 megapixel was a bit much, so they have been lowered to 1 megapixel.

Feedback (or criticism) is welcome. Thanks guys.

pau

im little bit confused with the buttons
how do you power the buttons.

i can only see which wire is for up, down, left.... but i cannt see which wire from the fpc is for ground and power/vcc
how do you connect the the buttons to the gpio. with pinouts

thank you :)

markyh444

@adamspc I am following this really closely now because my next project was going to be a handheld, though with a 3d printed case. This is probably going to be more cost effective and with better controls and potential features. I've got a broken PSP on its way to me from eBay, and I'm going to tear it down next week.

adamspc

@pau
The internal GPIO resistors are pulled up to 3.3v using software. When the GPIO pin is connected to ground, the voltage drops. This drop is detected by the software and a keypress is issued. One side of the button is conencted to the GPIO and the other is connected to ground. When a button is pressed, the connection to ground is made.

As for the pinouts, there are a bunch of ground wires on the FPC.
Check out the pinouts here, and look at the FPC connector. The ones labeled GND are all hooked to ground. All of them need to be hooked up because they go to different areas.

@markyh444
I'm happy to have inspired the change in direction. Looking forward to seeing your finished product.

adcraggles

@adamspc

Hi there,

This is simply amazing!!!!! Excellent work!!!! I also thought the psp would be great for this project, unfortunately my understanding of electronics is lacking. Do you plan on doing a more detailed tutorial at all, I really hope so.

Thanks
Adam

adamspc

@adcraggles
I'm happy to be more detailed on any portion of this. If there is something you don't understand just let me know and I'll explain it. I'm actually setting up a website I'll use for more specific tutorials on things like GPIO buttons and electrical schematics, so input from everyone on difficult areas is welcome.