[Solved] Switching Pocketsnes To Pisnes Controller Trouble.

BuZz

a screengrab on top of forum posts - somewhat confusing!

then the other location is used and you must use ssh to edit it (easier to update retropie-setup though and re-install the emulator to get the config at the new location)

TheDutyPaid

@BuZz said in Switching Pocketsnes To Pisnes Controller Trouble.:

a screengrab on top of forum posts - somewhat confusing!

then the other location is used and you must use ssh to edit it (easier to update retropie-setup though and re-install the emulator to get the config at the new location)

Which other location?

Now we are moving on to updating the setup?

How does one re-install the emulator, would I need to uninstall it first?

BuZz

/opt/retropie/emulators/pisnes

to update - https://github.com/retropie/retropie-setup/wiki/updating-retropie

update retropie-setup, then go to packages/optional packages and update pisnes

TheDutyPaid

@BuZz Updated to 4.0 beta 2 and restarted, but still no file path to, /opt/retropie/emulators/pisnes

BuZz

Did you go to RetroPie-Setup / Packages / Optional Packages and update pisnes ?

BuZz

also the path will be /opt/retropie/configs/snes/snes9x.cfg now - the other path did exist BTW, but you can't access it via windows shares - would need to SSH in. once you have updated you will be able to access it - via the configs share.

TheDutyPaid

Ok, I have now updated pisnes via RetroPie-Setup / Packages / Optional Packages and update pisnes from source

Using Putty I get this when trying to access the file, my Linux skills are very basic.
pi@retropie:~ $ /opt/retropie/configs/snes/snes9x.cfg
-bash: /opt/retropie/configs/snes/snes9x.cfg: Permission denied

BuZz

you can edit it via windows share, or to edit via ssh you can use nano

nano /opt/retropie/configs/snes/snes9x.cfg

TheDutyPaid

@BuZz We are getting there, thank you for your help and patience.

The file shows and when opened has. and can't find reference to how to map this to a PS3 controller.

[Keyboard]
# Get codes from /usr/include/SDL/SDL_keysym.h
A_1=100
B_1=99
X_1=115
Y_1=120
L_1=97
R_1=102
START_1=13
SELECT_1=9
LEFT_1=276
RIGHT_1=275
UP_1=273
DOWN_1=274
QUIT=27
ACCEL=8

[Joystick]
# Get codes from "jstest /dev/input/js0"
# from package "joystick"
# Defaults to XBOX 360 controller
A_1=1
B_1=0
X_1=3
Y_1=2
L_1=4
R_1=5
START_1=7
SELECT_1=6
QUIT=99
ACCEL=98
QLOAD=10
QSAVE=9
#Joystick axis
JA_LR=0
JA_UD=1
#Joystick DPAD buttons
LEFT_1=11
RIGHT_1=12
UP_1=13
DOWN_1=14
#player 2 button configuration
A_2=1
B_2=0
X_2=3
Y_2=2
L_2=4
R_2=5
START_2=7
SELECT_2=6
#Joystick axis
JA_LR_2=0
JA_UD_2=1
#Joystick DPAD buttons
LEFT_2=11
RIGHT_2=12
UP_2=13
DOWN_2=14


[Graphics]
DisplaySmoothStretch=1
# Display Effect: 0 none, 1 scanlines, 2 phospher
# NOTE Phospher does not run at full speed
DisplayEffect=0
MaintainAspectRatio=1
DisplayBorder=0
AutoFrameskip=1
Frameskip=200
Transparency=1
CPUCycles=100

[Sound]
APUEnabled=1
# Sound rates below as index, i.e. 7=44100 (some of these produce static)
# 0, 8192, 11025, 16000, 22050, 29300, 32000, 44100
SoundPlaybackRate=7
# Enable on RPI2 for clearer sound, disable on RPI1 due to performance impact
InterpolatedSound=0

Can't find reference to how to map this to a PS3 controller.

BuZz

When posting config/logs please use markdown to format them or use an external site like pastebin as detailed in https://retropie.org.uk/forum/topic/3/read-this-first

(I will edit your post so it is readable)

BuZz

To map it to a PS3 controller, you need the button IDs which can be found out with a tool like jstest as it mentioned in the config. TBH I think you would be best just to stick with pocketsnes which runs most stuff full speed on a RPI1. I don't have time to go into more detail I'm afraid and I don't think you will gain much from using this emulator.

TheDutyPaid

@BuZz I see

test

TheDutyPaid

I have run jstest and have mapped out all the buttons and sticks

Can I write a new entry in the config file for the PS3 in the same format of the xbox 360.

BuZz

@TheDutyPaid yep. Should be fine

TheDutyPaid

This post is deleted!

TheDutyPaid

If any one needs it, here is the full working config for PS3 which you can copy paste into the snes9x.cfg file.
/opt/retropie/configs/snes/snes9x.cfg
It will replace the 360 pad layout and there is no player 2 but you can edit the file as you wish.

[Keyboard]
# Get codes from /usr/include/SDL/SDL_keysym.h
A_1=100
B_1=99
X_1=115
Y_1=120
L_1=97
R_1=102
START_1=13
SELECT_1=9
LEFT_1=276
RIGHT_1=275
UP_1=273
DOWN_1=274
QUIT=27
ACCEL=8

[Joystick]
# Get codes from "jstest /dev/input/js0"
# from package "joystick"
# Quick save is on right analogue click
# Save is on R2
# Mapped to SNES layout for PS3 controller
# Quit is the PS button
# PS3
A_1=13
B_1=14
X_1=12
Y_1=15
L_1=10
R_1=11
START_1=3
SELECT_1=0
QUIT=16
ACCEL=98
QLOAD=2
QSAVE=9
#Joystick axis
JA_LR=0
JA_UD=1
#Joystick DPAD buttons
LEFT_1=7
RIGHT_1=5
UP_1=4
DOWN_1=6



[Graphics]
DisplaySmoothStretch=1
# Display Effect: 0 none, 1 scanlines, 2 phospher
# NOTE Phospher does not run at full speed
DisplayEffect=0
MaintainAspectRatio=1
DisplayBorder=0
AutoFrameskip=1
Frameskip=200
Transparency=1
CPUCycles=100

[Sound]
APUEnabled=1
# Sound rates below as index, i.e. 7=44100 (some of these produce static)
# 0, 8192, 11025, 16000, 22050, 29300, 32000, 44100
SoundPlaybackRate=7
# Enable on RPI2 for clearer sound, disable on RPI1 due to performance impact
InterpolatedSound=0

Thanks to BuZz getting this all working.