Full Size Arcade Build - DC Vs Marvel

Clyde

@vaportrail Very nice! I'm curious how it'll look when assembled.

HurricaneFan

@vaportrail That artwork looks gorgeous! Excited to see the final product.

vaportrail

Thanks guys, it's about 99% done...just have to put the finishing touches on it and edit all the footage. I had to work through some tech difficulties with compatibility between the t.v. and HDMI output from the Pi. Took me about a day but it's functioning perfect now. I'm really digging all the open space in the back cabinet and under the control panel. Updates will be coming!

Clyde

@vaportrail said in Full Size Arcade Build - DC Vs Marvel:

I'm really digging all the open space in the back cabinet and under the control panel.

I feel the same about my cabinet. Finally a convenient place for my two big arcade sticks and two wireless gamepads, and there is still room left! 😊 Of course, you pay for it with a toy that's the size of a cupboard.

FlyingTomahawk

Thanks for the video, well done.
That is one sweet looking arcade cabinet!
The artwork is awesome. Very envious over here.

vaportrail

@flyingtomahawk said in Full Size Arcade Build - DC Vs Marvel:

Thanks for the video, well done.
That is one sweet looking arcade cabinet!
The artwork is awesome. Very envious over here.

You bet, thanks for checking it out!

HurricaneFan

@vaportrail Got a few questions for you regarding this build:

Does the amp sit behind the tv in the top part of the cabinet? If you need to adjust volume at all, is it easy to get to?
What does this use for joystick/buttons to connect to the pi? Controlblock, ipac, etc...
With your 200 gig card, did you use the default retropie 4.4 build or a custom build from the game room site?
What buttons/joysticks did you pick for this build?

vaportrail

@hurricanefan

This thing has so much room inside the cabinet, that's the first place I thought about putting it. Then I remembered how frustrating it is with my bartop to have to reach around the back, open up the door, and fiddle around finding the volume knob. So this time I mounted it under the control panel. It flips up and....boom....instant access to the amp.
It is using the Xin-mo: xm-02 controller encoder to handle the transfer of input from the buttons to the Pi.
It's running Retropie version 4.3.11 with a Hyperpie front end image. The image was provided by GRS.
Thanks to some suggestions from a few fellers on here, I went with the Sanwa Joysticks. They do feel like step up from the LED ones that I went with on the Bartop. I have very limited time on them but so far they feel tighter and take input with less throw than the LED ones. I am a sucker for shiny objects and bright lights, so I went with the LED chrome trim buttons also from GRS.

HurricaneFan

@vaportrail Thanks for the quick response. Wow, I didn't know the panel flips up. Thats awesome!

vaportrail

@hurricanefan

Oh yeah....the back has two panels that swing open also.

HurricaneFan

@vaportrail That's a pretty slick design on their part. I'm itching to pull the trigger on making a full arcade cabinet but am still gathering the details on what I want in terms of buttons and joysticks.

How wide is the arcade cabinet?

Are you happy with the quality of the TV model you purchased?

vaportrail

@hurricanefan

Yeah, there are definitely a lot of things to factor in. The cool thing in making it yourself is being able to incorporate all the ideas you like from other's designs.

The overall width of the cabinet itself is 31.5". The control panel has some angles to it and at it's widest is 34.75".

So far I'm happy with the t.v. It's only 720p but I didn't see the need to spend more for better resolution for a retro game machine. The only down side with it is I had some compatibility issues with the HDMI output of the Pi with the t.v. It took me about a day to figure out, but long story short, when powered up together with the main power switch on the back of the cabinet, the Pi powered up quicker than the t.v. This causes the Pi to not sense the t.v. and therefore it wouldn't send an HDMI output. All I would get was "no signal" on the t.v. After trouble shooting, and some google searching, I found lots of others having similar issues with other t.v.'s So it isn't just this t.v., it's just how fast whichever t.v. you purchase powers up. The fix was "simple" in the end, just had to edit a couple of lines in the Pi's config text file so that the Pi always outputs an HDMI signal even if it doesn't sense a t.v. Unfortunately I'm not a programmer, so the road to get to the end was a bit long, but it works great now.

mediamogul

@vaportrail

Any particular reason for picking Kyle over Hal? Also, even after all these years, I'm still sore about Lobo having to job to Wolverine. If it weren't for the results being decided by a reader poll, the victory surely would have gone to the main man. I still crack up over the way Aquaman beat Namor though.

0_1524101149914_eafc34df-1be6-4c26-925f-6e813c39cc60-image.png

HurricaneFan

@vaportrail Thanks for answering all of my random questions. I'm looking forward to seeing your build video and what it looks like powered up.

vaportrail

@mediamogul

I wish I had some logic to the characters I picked, but honestly it was about finding high resolution files that looked liked they all fit together. It's easy to find all the characters, but some look realistic, some look like computer animations, and some look like comic book characters. So it was hard trying to find that many characters that were high enough resolution to blow up that big, and that looked like they belong together, if that makes sense. I really wanted to include Aquaman on the cabinet, but the only pic I could find was low resolution and looked like it was drawn by a 3rd grader :) As soon as I saw this Green Lantern, I knew I had to have it on the side. I don't know why but I just really dig that image.

vaportrail

@hurricanefan

You got it man!

mediamogul

@vaportrail

They're good choices. You seem to appreciate both comic labels equally and that's rare nowadays. Nice job all around.

Clyde

@vaportrail The drawings do fit together nicely! As for the characters, someone will always complain about them; you can't put three comic nerds in a room without them having five opinions about a single topic. ;) (No offense to comic nerds, I'm a big one myself.)

Care to share the exact fix for your problem? Especially since you learned that it's very common …

vaportrail

@mediamogul said in Full Size Arcade Build - DC Vs Marvel:

@vaportrail

They're good choices. You seem to appreciate both comic labels equally and that's rare nowadays. Nice job all around.

Thanks mediamogul!

@clyde said in Full Size Arcade Build - DC Vs Marvel:

Care to share the exact fix for your problem? Especially since you learned that it's very common …

Absolutely...give me a few days. I used a couple different sources online, and I think I could make a great explanation of what worked for me with a video. I think it would make a good tutorial if others encounter the same issue.

vaportrail

Ok guys.....got the arcade almost 100% done....enough to upload the video to YouTube...so here you go!