METADATA not saving - Favorites will never remain tagged

cyperghost

@semper-5 said in METADATA not saving - Favorites will never remain tagged:

I'm getting something new. and this is on a totally fresh image with nothing but the button script and yours.
this is the output when running your script:
switch.sh: line 17: echo: write error: Device or resource busy
switch.sh: line 19: echo: write error: Device or resource busy

Well... "Button script"?
Then it's clear whats happening. The Button script and "my" script are using the same GPIOs. Please disable the Button script and try again ;) We are getting closer :)

@julenvitoria
Yes it works with a generic button. Therefore comment all lines that contain $gpiopin2 - these aren't needed. But it's not a well written one. I just want to find out if I'm on the right track with this to use the POLOLU device.

Semper 5

@cyperghost more developments, still just cuts the power. and this is the only script I'm running on a fresh image.

Output:
switch.sh: line 10: $'\r': command not found
switch.sh: line 13: $'\r': command not found
switch.sh: line 16: $'\r': command not found
: Permission denied /sys/class/gpio/export
: No such file or directoryass/gpio/gpio24
: Permission denied /sys/class/gpio/export
: No such file or directoryass/gpio/gpio25
: No such file or directoryass/gpio/gpio25
switch.sh: line 22: $'\r': command not found
cat: '/sys/class/gpio/gpio24'$'\r''/value': No such file or directory
switch.sh: line 26: $'\r': command not found
switch.sh: line 46: syntax error near unexpected token `fi'

'witch.sh: line 46: `fi

mitu

@semper-5 You copied the contents of the script in Notepad by any chance ? Use Notepad++ to create/edit the scripts in Windows and set the line endings to Unix (LF), Notepad saves with Win/DOS line endings (the extra \r character in the script file).

Semper 5

@mitu yup that's what I've been using the whole time (Notepad ++)
I've made scripts with no problems many times before. but its just getting hung up on this one

anyway I can get this script in RAW? I could clear up just a few of the errors but not the rest. :/

cyperghost

@semper-5 The best way would be to edit with SSH connection and nano.

use putty, don't use WINSCP

cd /home/pi/RetroPie/scripts
1.1 if directory scripts does not exists use mkdir /home/pi/RetroPie/scripts
1.2 then try again with cd /home/pi/RetroPie/scripts
rm switch.sh this will remove script
nano switch.sh copy text from code box below
3.1 After inserting code with left mouse button
3.2 Press CTRL+X and press Y to save script
chmod +x switch.sh makes script executable
sudo ./switch.sh & to start script in background with root privileges ;)

switch.sh CODEBOX

#!/bin/bash
# End Emulationstation if condition of running binary is true (v1.599)
# v1.0 07/21/17 by cyperghost - Inital run 
# v1.5 07/27/17 - Great step to exit ES even if emulators is running by runcommand.sh are started // meleu
# v1.56 07/30/17 - All emulators will be detected. // meleu
# v1.58 08/02/17 - generel method: Use PPID to detect child PIDs now (ScummVM fix) // cyperghost
# v1.595 11/14/17 - Inserted newest emucall detection // meleu
# v1.599 04/18/18 - NESPI case
# v1.6 04/20/18 - added kill -9 to terminate emulators // julenvitoria
# greetings @pjft for his famous favorits and @meleu for his RegEx sniplets and his constant help! 

#this is the GPIO pin connected to POWER SWITCH
GPIOpin1=24

#this is the GPIO pin connected to POWER ON CONTROL
GPIOpin2=25

echo "$GPIOpin1" > /sys/class/gpio/export
echo "in" > /sys/class/gpio/gpio$GPIOpin1/direction
echo "$GPIOpin2" > /sys/class/gpio/export
echo "out" > /sys/class/gpio/gpio$GPIOpin2/direction
echo "1" > /sys/class/gpio/gpio$GPIOpin2/value

power=$(cat /sys/class/gpio/gpio$GPIOpin1/value)
[[ $power == 0 ]] && switchtype="1" #Not a momentary button
[[ $power == 1 ]] && switchtype="0" #Momentary button

until [[ $power == $switchtype ]]; do
    power=$(cat /sys/class/gpio/gpio$GPIOpin1/value)
    sleep 1
done
# Detect PID or EMULATOR NAMES
emucall="$(sed '4!d; s/\([\\"]\|[[:alnum:]_]\+=[^ ]* \)//g; s/[][(){}^$*.|+? ]/\\&/g' /dev/shm/runcommand.info)"
espid="$(pgrep -f "/opt/retropie/supplementary/.*/emulationstation([^.]|$)")"

echo "Button Pressed: $power - Switchtype: $switchtype"
echo "ES-PID: $espid"
sleep 5

# Handle calls and send TERM signal

if [[ -n "$emucall" ]]; then
    emupid="$(pgrep -f "$emucall" | tr '\n' ' ')"
    pkill -P "$(echo $emupid | tr ' ' ',')"
    kill -9 "$emupid"
    sleep 4
fi    

if [[ -n "$espid" ]]; then
    touch /tmp/es-shutdown && chown pi:pi /tmp/es-shutdown
    kill "$espid"
    exit
fi

echo "Script terminated not by ES!"

julenvitoria

@semper-5 It's very strange... for example lines 10, 13, 16, 22 and 26 are blank... It works for me but not in the totality of the emulators.

@cyperghost As I mentioned it really works for me, but not in the totality of the emulators... For example it works with retroarch and advancemame but doesn't work with pifba, pcsx-rearmed or mame4all. If I try the commands separately pgrep -f doesn't detect this emulators... pgrep -f "$emucall" doesn't show any pid. Any suggestion for detect the emulators properly?

Thanks

cyperghost

@julenvitoria Thanks for the headup. As I wrote this is just a basic script! meleu is the RegEx wizard out here. I changed codebox.... please try again.
I added emupid="$(pgrep -f "$emucall" | tr '\n' ' ')" pkill -P "$(echo $emupid | tr ' ' ',')"
PS: That are the outfindings of @meleu

I'm working on annother emulator detection - Shutdown script some input for better emulator detection

The errors @Semper-5 descripes are caused because these "empty" lines contain Carriage Return (CR) character (0x0D, \r) ... Windows uses linefeed (LF) and carrige return (CR) for creating a new line.

julenvitoria

@cyperghost said in METADATA not saving - Favorites will never remain tagged:

emupid="$(pgrep -f "$emucall" | tr '\n' ' ')" pkill -P "$(echo $emupid | tr ' ' ',')"

Hi! I tried your new code but don't work with pifba nor mame4 all. However it worked with pcsx-rearmed emulator. I tried kill -9 "$emupid" and then it works. I dont know if it is advisable or not to do this. If you know any other way I would appreciate it.

Thanks!

cyperghost

@julenvitoria said in METADATA not saving - Favorites will never remain tagged:

@cyperghost said in METADATA not saving - Favorites will never remain tagged:

emupid="$(pgrep -f "$emucall" | tr '\n' ' ')" pkill -P "$(echo $emupid | tr ' ' ',')"

Hi! I tried your new code but don't work with pifba nor mame4 all. However it worked with pcsx-rearmed emulator. I tried kill -9 "$emupid" and then it works. I dont know if it is advisable or not to do this. If you know any other way I would appreciate it.

Thanks!

Really don't know why this is happening. I just copied some text parts.
But you may test this script here, please?
All you have to do is to copy from textbox into a bashfile. Maybe emu_shutdown.sh, make it executable with chmod +x emu_shutdown.sh and execute it via SSH if an emulator is running?

Maybe you will get better results then? It will only terminate emulators, not more not less.

julenvitoria

@cyperghost Hi, I tried your emulator detector too and the result was the same more or less. There were some emulators that dont stop... If you prefer I could write you throug the other thread.

cyperghost

@julenvitoria Thanks! You are right the signal levels are ignored by some emulators.
I would suggest to use kill -9 <PID>

I will update both scripts. So you see - once again something new explored .... ;)

Semper 5

Ok, so no errors to report. But the power switch doesn't work now.
I temporarily took out the entry in autostart.sh just to see what would happen in putty. and like I said, no errors. but when i press the power button (off) it does nothing

julenvitoria

@cyperghost wow! It’s perfect!! I’ll try the other script later

Thanks!

cyperghost

@semper-5 Please do so as you wrote. Take auto entry from autostart.sh!
and do a manuel start via SSH to see error messages. I need the routine how the POLOLU acts with the switch.

Please use sudo /path/to/switch.sh & command with the latest script version.

@julenvitoria You are welcome! Thank you for testing. The other script is also working! I tested several times.

Semper 5

@cyperghost it doesn't output any errors.

I enter: sudo bash /home/pi/RetroPie/scripts/switch.sh &
output: [1] 10921

I think it s working to some extent because if I try to run it again it will tell line 18 & 20 write protection due to device being busy

cyperghost

@semper-5 That's okay ... this [10921] thing is the process number.
So what happens if you press the power button? With the script in background running?

You should see a message like:
Switch press 0 - Switchtype 1
ES-PID: 1232

Semper 5

@cyperghost no message, no activity, no error. nothing :/

cyperghost

@semper-5 What is the output of
cat /sys/class/gpio/gpio24/value

if the power button is pressed, and then if the power button is released?
It should be 1 if pressed and 0 if released

The script must be active for this ;)

Semper 5

@cyperghost it's 0 on both being pressed and released

cyperghost

@semper-5 That's the error here ... but tell me why? That's not possible! The python scripts are working?

Maybe @Yahmez knows the answer?
If we watch for input of GPIO24 (=power button), why there is no change in input value?