Nespi case+ Reset works power doesnt

lostless

Here is the actual python script from retro flag

#!/usr/bin/env python3
from gpiozero import Button, LED
import os 
from signal import pause

powerPin = 3 
resetPin = 2 
ledPin = 14 
powerenPin = 4 
hold = 1
led = LED(ledPin)
led.on()
power = LED(powerenPin)
power.on()

#functions that handle button events
def when_pressed():
 led.blink(.2,.2)
 os.system("sudo shutdown -h now")
def when_released():
 led.on()
def reboot():
 os.system("sudo reboot")


  
btn = Button(powerPin, hold_time=hold)
rebootBtn = Button(resetPin)
rebootBtn.when_pressed = reboot 
btn.when_pressed = when_pressed
btn.when_released = when_released
pause()

Seems we can replace the os.system(“Sudo shutdown -h now) with one of the many scripts that we used for the mauseberry for a good shut down.

KN4THX

@randypi here is the full single command:

wget -O - "https://raw.githubusercontent.com/RetroFlag/retroflag-picase/master/install.sh" | sudo bash

I am still learning about linux and not sure if breaking it up into two commands would cause the issue. Perhaps someone can instruct me.

@lostless Is the Nespi script a safe and worthy script to use for the New Nespi case or does it lack any major components for retropie ? i.e saving metadata, etc.

lostless

@thedatacereal doing just a straight shutdown will just hault what’s going on and not save sram in a game, if you’re running a game. If in emulation station, metadata like favorites and last played will not be saved. A script that I use for my mayseberry circuit actually exits the emulator properly and goes back to emulation station, waits 5 seconds to make sure the emulator has quit. Then it uses emulation stations shutdown instead of just a forced shutdown. If you’re not in a game or emulation station, it just does a forced shutdown.
Try using emulation stations shutdown and see how it effects the nespi+ case and see if you can recover from it. I don’t think that case does a hard turn off, but puts the pi in a wait mode. If you can restart, the script I use should work. It was written by @meleu and he has a thread around here that has it posted.

cyperghost

@lostless @randypi
I think I'm able to integrate a safe shutdown with --nespi+ parameter into this script here wait for next release (0.40 or higher). It a kind of swiss army knife for ES related shutdowns and gives a interface for python scripts as it outputs state of EmulationStation and RUNCOMMAND (as inidicator for an emulator running or not)

cyperghost

@lostless @randypi
Version 0.40 of Multi Switch Script is released. I've added support for NESPI+ case

To install:

Login with SSH
Type in commands mkdir /home/pi/RetroPie/scripts && cd /home/pi/RetroPie/scripts
DL: wget https://raw.githubusercontent.com/crcerror/ES-generic-shutdown/master/multi_switch.sh && chmod +x multi_switch.sh
3.1 If there is an older version please remove this one with rm multi_switch.sh
3.2 Otherwise the current downloaded version will get a .sh.1 filename!
Now edit ES autostart with nano /opt/retropie/configs/all/autostart.sh and add script to like ....
/home/pi/RetroPie/scripts/multi_switch.sh --nespi+ & but BEFORE the last line emulationstatio #auto
5.1 NESPiCase @Yahmez -Mod and NESPi Case + makes use of internal PullUp Resistors, therefore raspi-gpio is needed
5.2 Install raspi-gpio with sudo apt install raspi-gpio (only for NESPiCase and Yahmez-Mod needed!)
Give me some feedback ;)

Please remove the old python script
Therefore edit sudo nano /etc/rc.local and remove/mark with # the python line with the old NESPi+ script. Save the edited file. Now type killall python to terminate all running instances of the old script.

That's all

If this doesn't work you've likely raspi-gpio not installed. You can call also the script via SSH. Therefore cd /home/pi/RetroPie/scripts, now type ./multi_switch.sh --nespi+

For trouble shooting:

check if you installed raspi-gpio
check if the switch in the case is setted to On
Please disable any other shutdown script before and terminate the process
Try to start the script manual so you've got the chance to read error messages

If you have problems --- use this thread

randypi

@cyperghost so I’m going to try it this weekend and I’ll let you know how it goes. One question, “login with ssh”. What does that mean?

lostless

@randypi ssh is a way to remotely control a terminal mainframe from another computer. so when you look at the command line on retropie, you can remotely log in from another computer and do commands as if you are actually at the the mainframe computer. The pi acting as mainframe server. First you have to enable Ssh under raspiconfigs. Its off by default. If you are on a Mac or Linux you can just use the terminal app. You need to find a terminal emulator for windows. first command to log in is
ssh pi@pis ip address
password is raspberry by default.

cyperghost

@randypi Yes it is like lostless said! SSH is a terminal programm so you can access your Pie from annother PC.

You can use putty or kitty as terminal programm (for your windows or mac PC) and connect to your Pie. The big advantage is, that you don't need to type the commands manual (and it's very likely that you make mismatches here). So just copy and paste and execute with enter.

To enable SSH, go to RetroPieSettings, Rasperry Pie Config. A bash menu opens, select "Interfacing Options" and then Enable SSH

Read more about here
https://github.com/RetroPie/RetroPie-Setup/wiki/SSH

edit

I also used the original python method. But I think alongside the bash is a bit more generic ;)

To install use this:

Login with SSH
Got to installed directory with cd /opt/RetroFlag
download the multi_switch script with sudo wget https://raw.githubusercontent.com/crcerror/ES-generic-shutdown/master/multi_switch.sh
Make script executable sudo chmod +x multi_switch.sh
Remove old script with sudo rm SafeShutdown.py
Get new script with sudo wget https://raw.githubusercontent.com/crcerror/retroflag-picase/master/SafeShutdown.py

randypi

@cyperghost just a heads up, I was powering my nespi case+ off of a sarbrent usb hub while I waited for my new canakit power cord to come in and now my pi is dead... so I have been reading forums to bring it back to life, but it’s gone. I am ordering a new one tonight (I heard they are dual band WiFi!) and I’ll try the script above. I realized I use SSH to transfer my roms from my laptop to the pi. I think I use winshp. That will make life a whole lot easier entering code exact. Again sorry it’s taking me so long but I will try this code and let you know how it goes! Thanks everyone

dishins

This post is deleted!

deathboy

@cyperghost Just got here after buying a 2nd hand case and losing my mind a little.

Wanted to say that your instructions and script worked perfectly first time, absolutely over the moon :)

Thankyou, thankyou :) (I even signed up here to say ta ;) )