mame2003-plus: hundreds of new games, improved input, features, new bugs - now with runahead support
-
Looks like the system32 games have a lower pitched audio. Not sure when it started. The bug is only in Plus. Original 2003 is fine.
-
@darksavior said in mame2003-plus: 250 new games, new input system, new features, new bugs:
Looks like the system32 games have a lower pitched audio. Not sure when it started. The bug is only in Plus. Original 2003 is fine.
yea does seem off but so does the driver I compared the cpu speeds and ym speeds in lastest mame and they dont match up with the speeds our driver has. mame2003+ aims to run the at the speed the hardware intended. I could be a glitch in timing system as well cant rule that out.
You can see mame2003+ when playing data east games. mame2003 just plays these games too fast the pitch is completely in them. I dont know how fba handles robocop if its running 60fps the pitch will be wrong like mame2003.
-
Is this one of those issues which can be resolved by turning off/down the RetroArch 'audio stretch' function?
-
@darksavior said in mame2003-plus: 250 new games, new input system, new features, new bugs:
Looks like the system32 games have a lower pitched audio. Not sure when it started. The bug is only in Plus. Original 2003 is fine.
I tested in mame078 mame2003 mame 2003 plus none of them are correct to current mame in pitch its more pronounced in mame2003+ because the timing of the driver wrong
-
@markwkidd said in mame2003-plus: 250 new games, new input system, new features, new bugs:
Is this one of those issues which can be resolved by turning off/down the RetroArch 'audio stretch' function?
its just not right none even in mame 078 mark
the ym soundchips are different speeds and the other soundchip i cant remeber the name of is off speedwise as well in the driver. It would need updated to work properly on all versions of mame2003 if fba is the same as mame2003 something is wrong there too
-
@markwkidd here is the difference between mame2003 and mame2003+ its easier to tell on this game start ddragon2 its 57.44 fps youll clearly hear mame2003 is playing the audio to fast and the game as well
-
@grant2258 turn down/off audio skew and mame2003 plays them at the right speed. there's no bug.
-
I am curious about how it sounds with Audio Skew turned off.
Regardless of the results of that specific test, I am reminded of a thought I had in the past.
Are there downsides to recommending that people in general disable Audio Skew for the mame2003-plus core or turn it down to some amount below its audible threshold?
The minimum audible Audio Skew number was determined somewhat informed manner in a libretro forum thread that I can find now that I have the right term.
-
@markwkidd said in mame2003-plus: 250 new games, new input system, new features, new bugs:
Are there downsides to recommending that people in general disable Audio Skew for the mame2003-plus core or turn it down to some amount below its audible threshold?
yes - the point of the default skew setting is to skew (speed up/slow down the audio/video) games that are close to 60FPS to 60FPS (or, whatever your screen hz is). otherwise, you get judder with vsync. the use case for this was NTSC games with strange 60.X timings, i believe.
now, i personally think the default setting is a little too large (you can easily notice the effects skewing a 57.4fps game), but that's a retroarch problem. i think they would be open to lowering the default. i think that's a much better solution than getting the users to mess with the settings, or fooling the API until it thinks you're running a 60fps game.
-
yea need to get that magic number to test it out. The think that confusing though is games like mk and stonebal (i just found out about this one) are working ok on mame2003 without the audio scew it just seems the 57 fps are getting chomped by this. On our end 2003 what we are doing is only playing 57.4 worth of sample time its the audio timing of 48k taking the 60fps time that pushing the framerate up with the audio scew as is. I originally thought the timing changes the samplerate it doesnt. The only way you can change the sample rate is with ra settings as far as i can tell
-
OK I will locate the libretro forum thread about the audio skew and see if RetroArch is amenable to a PR lowering the default. If not maybe it's worth a note somewhere in the mame2003-plus docs.
On this theme, in a general way:
@dankcushions I would also really like to help create a PR to add the "RetroPie udev ordering patch" to RetroArch as an option in the cfg. I know there is an issue about it that you participated in but I think that's could be another example where a PR is the best way to communicate with RetroArch.Unfortunately I haven't yet added a RetroArch cfg option so I'll need to learn.
-
@markwkidd we dont need an audio screw for mame2003+ only 2003 needs its atm setting it shouldnt effect us at all we are within the ra timing system not fooling anything just playing the sames sample frames per second to what it shoud be can add both options as a core setting if you like though. Midway will have to be the new way 30fps is too much for audio scew as far as im aware
-
@grant2258 and @dankcushions can you take a look at the post James-F makes here: https://forums.libretro.com/t/default-audio-rate-control-delta-value-0-005-is-bad-and-quite-audible/15129/36
That is the key message -- that this audio_rate_control_delta is only used when there the frontend does not have accurate refresh rate about the user's monitor or when then monitor's refresh rate is varying wildly. There are other posts on this theme here and there in the thread including some from Dwedit that might be relevant.
James-F describes a procedure to manually set the refresh rate. Is anyone willing to try this?
If I understand James-F, then that maximum skew amount should never be necessary because the feature is more intended to adjust between 60fps and the framerate/refresh rate supported by the user's monitor than it is meant to be adjusting between the framerate of the emulated game and 60fps.
If the refresh rate is not getting set automatically accurately by something in the RetroArch-Rasbian-Hardware monitor path then the audio winds up getting compromise when the total difference reaches a certain point.
So if that's true, the solution really isn't lowering the maximum skew which would fix the audio but introduce video problems, but do a better job to set the refresh rate for the user's system. Anyway this is yet another area I'm not familiar with.
Hmm.
-
@markwkidd said in mame2003-plus: 250 new games, new input system, new features, new bugs:
That is the key message -- that this audio_rate_control_delta
different setting. the one that affects us here is
audio_max_timing_skewit's a very simple setting and you can see the effects very easily. i encourage you to test with it.
-
@grant2258 said in mame2003-plus: 250 new games, new input system, new features, new bugs:
we are within the ra timing system not fooling anything
if a 57.4fps game is not reporting 57.4fps to timing.fps, it's fooling the system. if it's reporting it correctly, the default audio skew will skew a 57.4fps game to 60fps, every time.
-
@dankcushions im not doing that teh fps is set to 60 the audio is changeing the timing because it takes 60fps to play a 48k sample. Im just playing the correct samples per frame
-
Thanks hehe. I'll tell you -- it blows my mind when people post in here and they know that such and such game's audio is off. Or that a sprite is screwed up.
On one hand: I have a stupidly large record collection and a pretty good recall of music that's in it. I would know instantly if there were problems like this with my music.
But I only play a handful of video games personally. I don't know what they are supposed to sound like! I can certainly tweak settings to some extremes and see what happens though.
-
@grant2258 said in mame2003-plus: 250 new games, new input system, new features, new bugs:
@dankcushions im not doing that teh fps is set to 60 the audio is changeing the timing because it takes 60fps to play a 48k sample. Im just playing the correct samples per frame
then you need to change your sample segment for a 57.4fps frame, i believe. @barbudreadmon was looking into this in fbalpha. not sure how far they got.
-
@dankcushions fba had problems i sent a message to him he did fix it all i am doing is sample segment for a 57.4fps frame
-
@markwkidd said in mame2003-plus: 250 new games, new input system, new features, new bugs:
Thanks hehe. I'll tell you -- it blows my mind when people post in here and they know that such and such game's audio is off. Or that a sprite is screwed up.
On one hand: I have a stupidly large record collection and a pretty good recall of music that's in it. I would know instantly if there were problems like this with my music.
But I only play a handful of video games personally. I don't know what they are supposed to sound like! I can certainly tweak settings to some extremes and see what happens though.
personally i like some of my records at the wrong speed ;) with the skew, i found it easiest to test with robocop (57.4fps) and have a savestate in the level, and hum the music. then reload with a 0.01 skew set, and you can hear the pitch of the music change very slightly.
personally i prefer the slightly wrong speed/pitch and no juddering from a 57.4fps, but i'm at the stage now where i'd sooner just have it at a lower threshold so we don't have to talk about it ever again :P
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.