Please help. Can’t configure arcade buttons in my Titan Gbox board
-
So here is my situation. I have a Titan Gbox Jamma board that I bought to install in a home made control panel which will connect to a large LCD tv via the vga port. The control panel has a 2 player set up with 14 buttons, and a coin slot.
For some reason, I can only get the joysticks configured and only 2 buttons for each player. This is driving me nuts. The controller configuration option within the emulationstation GUI has 9 controller options to choose from. None of the options work properly. If I start a game, say Mortal Kombat, only 2 buttons work. Once the game starts, there’s an additional configuration GUI that I can access to configure inputs for Imageboth players, but it too only sees the joysticks and 2 buttons per player.
How do I go about configuring 14 buttons and a coin slot for this board?
Any help is appreciated.
Below is a link to what I purchased. I tried to upload pictures into the post, but it fails.
https://m.aliexpress.com/item/328098344 ... 2809834477
-
@pengo13 I think you are on the wrong forum?
-
@rbaker said in Please help. Can’t configure arcade buttons in my Titan Gbox board:
@pengo13 I think you are on the wrong forum?
It uses retropie, so he's in the right place. Although we're probably talking about a pre-installed build of retropie so this most likely won't be supported on this forum...
You need to go back to aliexpress and try and figure out what emulators this thing runs on, then look at the configuration online for those emulators.
-
@ballboff said in Please help. Can’t configure arcade buttons in my Titan Gbox board:
It uses retropie, so he's in the right place
Do you have a reference for this ? From a summary search about this board, it looks like a custom PCB and not a RPI. Either way, you're right probably about the pre-installed part.
@Pengo13 we don't support 3rd party images with RetroPie, ask the seller for support. If you want to help you, then please use the image provided by the project from retropie.org.uk/download.
-
@mitu said in Please help. Can’t configure arcade buttons in my Titan Gbox board:
@ballboff said in Please help. Can’t configure arcade buttons in my Titan Gbox board:
It uses retropie, so he's in the right place
Do you have a reference for this ? From a summary search about this board, it looks like a custom PCB and not a RPI. Either way, you're right probably about the pre-installed part.
@Pengo13 we don't support 3rd party images with RetroPie, ask the seller for support. If you want to help you, then please use the image provided by the project from retropie.org.uk/download.
You can see it on the preview videos...
-
@ballboff Didn't get that far :). Looks it's using an older release of RetroPie. Scammers.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.