Arcade/fight stick recommendations

suprjami

Any PS3 capable fightstick should work, just like using a wired PS3 controller. I also have Mad Catz SE PS3 sticks like the SFIV stick above, and a Hori FS3 PS3. They work fine. You'll probably want to replace a Mad Catz joystick with a Sanwa, the stock ones are pretty poor quality.

Any XBox 360 fightstick should work with xboxdrv, just like you were using a wired 360 controller.

Unsure on PS4 or XBone.

Parzival

i tried to add a picture but i dont know how haha could you tell me how to upload pictures in the forum?

addyb

I just use flickr and post the links.

My arcade stick arrived today :)

https://flic.kr/p/JzRFh9
https://flic.kr/p/Kwppxg
https://flic.kr/p/KpuMkx

Floob

@addyb Looks great!
You'll be up and running in no time.

addyb

@Floob said in Arcade/fight stick recommendations:

@addyb Looks great!
You'll be up and running in no time.

Can't wait to try it out. May not get chance tonight though :(

addyb

Mmm getting input lag with this arcade stick. Noticed it straight away. Not sure what I can do resolve it. My wired buffalo usb pad is fine with the same games :(

Floob

Have you tried using it cabled for comparison?

Might be worth checking the firmware:
http://www.8bitdo.com/fc30joystick/Firmware.html

I'll have to find mine to try it out as well.

You may also want to try posting here:
http://forum.8bitdo.com/forum-2-1.html

addyb

@Floob

Yeah tried it wired as well. It's like it's missing inputs. So for example on the punisher I can keep tapping the button and it will only throw a couple of punches then pause. Wired buffalo pad it is the full registered combo.

Joystick works fine in menus and button presses are fine. I've not checked the firmware yet. Just plug it into my laptop and update?

Floob

I just checked my notes and it seems that Bluetooth with at least firmware 1.41 should work much more reliably.
I connect using the Mode 1 Joystick mode.

addyb

Ok mate I'll update the firmware tomorrow night and check again.

Cheers.

addyb

@Floob said in Arcade/fight stick recommendations:

I just checked my notes and it seems that Bluetooth with at least firmware 1.41 should work much more reliably.
I connect using the Mode 1 Joystick mode.

If the firmware update doesn't help later is there anything else I can maybe try? A config tweak or something?

Also for mode 1 it's just hold home button down for 3 secs isn't it?

Floob

If the firmware doesnt help, you could see if you could shorten the length of the usb cable, or email 8bitdo.com support directly, they are often very helpful. Or at least post on their forums anyway. I found the firmware fix did it for me.

Yes, Mode 1 is just hold Home for 3 secs:
http://download.8bitdo.com/Manual/FC30_joystick_Manual_ENG.pdf

addyb

Cheers mate. I posted on their forums earlier today.

chigundo

@addyb what games/system are you using it on?

addyb

Just tried mame and a few games.
Splatterhouse, the punisher and battle circuit so far.

addyb

Updated to 1.42 fw. I was on 1.41
Lag still present:(

Floob

Thats weird, it sorted it for me.
Try emailing 8bitdo confirming the controller model and firmware used.

Is it still skipping inputs as you mentioned before?

addyb

Will do mate. Thanks for the advice so far. I'm pretty gutted right now ;(

addyb

I think it's sorted. Reset my stick and paired it and then quit to terminal and did this:

sudo nano /etc/udev/rules.d/10-local.rules

I then added this line

SUBSYSTEM=="input", ATTRS{name}=="8Bitdo SFC30 GamePad Joystick", MODE="0666", ENV{ID_INPUT_JOYSTICK}="1"

Restarted emulationstation and now it seems to work fine with no lag I can see :)

Floob

Thats great news! Nice one!

I forget which version of RetroPie you are using, but it should add that line for you automatically in the Bluetooth menu now.