OpenBOR 6xxx OpenBeta Testphase

cyperghost · 30 Sept 2018, 18:00

There are two ways

If you have RetroPie 4.4 then you can install preinstalled binaries. For RetroPie 4.3 I have also a binary precompiled.

Just enter with SSH and type wget "http://raw.githubusercontent.com/crcerror/OpenBOR-63xx-RetroPie-openbeta/master/openbor_openbeta.sh"; bash openbor_openbeta.sh galina; rm openbor_openbeta.sh

The version is installed to /home/pi/openbor_openbeta
PAKs files can be placed to /home/pi/openbor_openbeta/Paks if an older instance of OpenBOR was already installed then the PAK path is likely /home/pi/RetroPie/roms/ports/openbor

A script that just launches OpenBOR graphics menu will be added to PORTS section.

Follow instructions from here: Beta scriptmodule then PAK files are placed to /home/pi/RetroPie/roms/ports/openbor and OpenBOR 6xxx is compiled on your own mashine. A script for selection PAK files will be place to PORTS section

Please use @ sign and write name like @mahcneto to tag people, then they will be informed of being mentioned to a post.

Welcome to our forum ;)

darknior · 30 Sept 2018, 18:11

@cyperghost said in OpenBOR 6xxx OpenBeta Testphase:

It is complete based on Rofl0r's branch. Therefore I'm not very pleased to support this. Only the 6xxx is an official branch.

I know you don't want to support this release but can you share me your 3600 binary compiled for RetroPie 4.3 please ?
I really want to try it with some games to complète the 3400 and 6315 games :)
More OpenBOR version i have, more games i have a chance to launch on pi :)
Thanks

cyperghost · 30 Sept 2018, 18:21

@darknior Sorry for misunderstanding ... it's 3400 with PAK support.
Download here, you can just exchange current RetroPies OpenBOR with this one in location /opt/retropie/ports/openbor

mahcneto · 30 Sept 2018, 18:54

@cyperghost Thank you! Just tested my WIP game and it works flawlessly! If someone wants to give it a try, it's here: https://gx-openbor.blogspot.com/2018/08/billy-lees-moveset.html

cyperghost · 30 Sept 2018, 19:12

@mahcneto You are welcome ;) Which way for installation did you have used?

darknior · 1 Oct 2018, 22:16

@cyperghost said in OpenBOR 6xxx OpenBeta Testphase:

@darknior Sorry for misunderstanding ... it's 3400 with PAK support.
Download here, you can just exchange current RetroPies OpenBOR with this one in location /opt/retropie/ports/openbor

Ok thanks, i already have and use it :)

dishins · 2 Oct 2018, 00:39

Hi, i just tried the latest build and i can see the paks listed in OpenBoR menu, however i have no input, my controller doesnt work, im using 8bitdo SF30 pro via bluetooth, any help on this?

BiZzAr721 · 2 Oct 2018, 01:45

@dishins Is the game selection screen your seeing the OpenBOR loader screen (red lettering, game art on top right) or @cyperghost 's script which has the blue background (like retropie setup menu)? How did you install?

dishins · 2 Oct 2018, 02:02

@bizzar721 I installed as said in this post:

@cyperghost said in OpenBOR 6xxx OpenBeta Testphase:

There are two ways

If you have RetroPie 4.4 then you can install preinstalled binaries. For RetroPie 4.3 I have also a binary precompiled.

Just enter with SSH and type wget "http://raw.githubusercontent.com/crcerror/OpenBOR-63xx-RetroPie-openbeta/master/openbor_openbeta.sh"; bash openbor_openbeta.sh galina; rm openbor_openbeta.sh

The version is installed to /home/pi/openbor_openbeta
PAKs files can be placed to /home/pi/openbor_openbeta/Paks if an older instance of OpenBOR was already installed then the PAK path is likely /home/pi/RetroPie/roms/ports/openbor

A script that just launches OpenBOR graphics menu will be added to PORTS section.

Follow instructions from here: Beta scriptmodule then PAK files are placed to /home/pi/RetroPie/roms/ports/openbor and OpenBOR 6xxx is compiled on your own mashine. A script for selection PAK files will be place to PORTS section

Please use @ sign and write name like @mahcneto to tag people, then they will be informed of being mentioned to a post.

Welcome to our forum ;)

I have 3 Openbor entries in my ports menu, one says ¨beta¨ and the other two are the old ones which have the selection screen or directly launch the game, neither of these my controllers are working.

Edit: i just uninstalled everything and started from scratch, now i have just 1 OpenBOR entry but my controller still not works :(

cyperghost · 2 Oct 2018, 04:28

@dishins said in OpenBOR 6xxx OpenBeta Testphase:

t: i just uninstalled everything and started from scratch, now i have just 1 OpenBOR entry but my controller still not works :(

OpenBOR is not a libretro emulator. You need a keyboard to configure it first. There are some scripts to automate this but for now manual setup is needed

BiZzAr721 · 2 Oct 2018, 16:25

@dishins You could also use @cyperghost 's script module to install through experimental in retropie setup

https://retropie.org.uk/forum/topic/19326/openbor-6xxx-openbeta-testphase/35

If you are using the older OpenBOR, it will overwrite it. This will allow you to run games from a script menu that can be navigated with a controller.

cyperghost · 2 Oct 2018, 17:42

@bizzar721 I think he tried it already. About the scriptmenu ... I think I found a why to get good results. Need just some time to test.
But I don't know if the module will be accepted in the code review ;)

mitu · 2 Oct 2018, 17:54

@cyperghost said in OpenBOR 6xxx OpenBeta Testphase:

But I don't know if the module will be accepted in the code review ;)

Unless you submit it, you'll never find out :).

cyperghost · 2 Oct 2018, 18:47

@mitu Well you're right! I already asked for reference. The challange is that the description name of the script module is responsible for all pathes.
As the function are all called by local I should strip pathes. I think it's better to set all OpenBOR versions in one directory.

# $1 string, $2 length
function strip () {
echo "${1:0:$2}"
}

md_id="openbor-6xxxx`
md_id="$(strip $md_id -5}"

This would be my solution to strip away -6xxx
;)

dishins · 2 Oct 2018, 20:07

@bizzar721 Thanks, as @cyperghost said, i already tried that. Turns out that i managed to configure my gamepad with a keyboard inside the game thanks to @cyperghost .

All games that i tried worked great with 6xx version, nice!

Is there any way to setup like a global config to my gamepad so i dont have to setup each game controls one by one?

BiZzAr721 · 2 Oct 2018, 21:33

@dishins Using in game setting, save settings as system config (I believe that's what it's called). All future games will default to that. Mods with configs saved, you could just load that system config, or SSH into the config/ports/openbor/saves directory and copy a config from a mod that's config'd how you like and rename it to`gamename.cfg.

cyperghost · 3 Oct 2018, 07:29

@dishins A small workaround I use is to edit runcommand-onstart with
nano /opt/retropie/configs/all/runcommand-onstart.sh

and add following line

[[ $2 == openbor ]] && filename=$(basename "$3") && cp "/opt/retropie/ports/openbor/Saves/master.cfg" "/opt/retropie/ports/openbor/Saves/${filename%.*}.cfg"

I setted one game ready and renamed it's config just master.cfg now if the emulator with name openbor starts, it will copy this masterfile to current loaded module file.

So if I start TMNT Shell Shocked.pak then the copy command is cp master.cfg "TMNT Shell Shocked.cfg" you may change pathes and emulator name after $2 depending on your setup. You see emulator name in gray box

Now launching GAMETITLE (EMULATOR) ...
Press a button to configure
Errors are logged to /dev/shm/runcommand.log

dishins · 4 Oct 2018, 00:21

@cyperghost nice! i'll definitely use this, thank you!

darknior · 4 Oct 2018, 20:52

Question @cyperghost ...
Will you try to update the source code with a better version ?

We use the 6312 ... but on the 6325

fixed a heavy bug on malloc structure

v6330

fix for segmentation fault on runtime (Linux)
added joystick rumble mode for all SDL ports configurable by options (Wii port is now configurable too).
http://www.chronocrash.com/forum/index.php?topic=3947.0

...

v6412

Added my first function to openbor. We already had loadmodel to load a cached model into memory but now I have added unload_model to remove a model from memory.

Some interesting improvements from our version ...

cyperghost · 5 Oct 2018, 08:02

@darknior I'm trying to setup the scriptmodule....
But I think it will end in 2 setups ... I do not have the time to do this are to full understand the packages.sh ... need some help some moderator to set this up.

I tried a script posted here but it won't install like ..
Therefore it's easier to let rp_module_id="openbor-3400" and then install two version of OpenBOR with 2 setups :(
Maybe annother one can solve this.

Goal: To install more instances of OpenBOR and to select the version out of runcommand menu like you want.