Controller Config Moving Down options and skipping buttons all by itself

[Dwarfboysim]

Hi all,
First up
Raspberry Pi 3B
SanDisk 64GB SD Card
Standard 2.5 Amp Official Raspberry Pi PSU
4 x Logitech F710 Wireless Controllers
1 x Logitech Wireless Keyboard and Mouse
Running Retropie 4.4

After a recent update I have encountered 2 issues:

1. Pi prompts for a login when starting up before it loads Emulation Station. This I have fixed.
2. Controller configs screwed up. I have cleared the controller configs and attempted to reconfigure each of the 4 controllers. most buttons configure fine but when I get to right trigger it sometimes accepts it other times says NOT DEFINED and then skips down 2 or 3 by itself. This behaviour but with slightly different buttons occurs on the other controllers as well. I have tried unplugging the wireless receiver for the keyboard and mouse and also tried unplugging all the other controllers and doing them one at a time.

Any suggestions?

Thanks,
Dwarfboysim

[mitu]

@Dwarfboysim Re-install the xpad driver, reboot and re-try the configuration.
I think the update overwrote the xpad driver installed by RetroPie and you're using the default xpad driver, which treats triggers as analog axis instead of buttons.

[Dwarfboysim]

Thanks that fixed it :)

Also now have a fresh install of 4.4 up and running beautifully.