mame2003-plus: hundreds of new games, improved input, features, new bugs - now with runahead support
-
im lost what are you asking? If you stuggling with this just use game focus mode
-
Sorry I am not quite getting the "retropad2 a joycode". I get the
input_player2_a = "s"set in my retroarch.cfgI think of binds as RA in the settings -> input or quick menu -> controls but also in the controls menu you can see the controller binds. Like button 9 is select/credits usually on a controller for me but I am taking it the controller is not the "retropad2 a joycode". :)
-
it means button 9 on the controller and keynum1 is mapped to start
is this case scenario keynum1 would sent sent the a retropad start and keycode keynum1
-
If I can get that piece I get the input options now. in dropping one or the other or accepting both.
-
When I think of the RA retropad I think of two bindings, one to the keyboard and one to the controller for each input?
-
ive already told you this when you bind a key to a retropad it sends that key and retropad start bound to to the core.
a real retropad only sends the retropad start when you press button 9
game focus mode stops the retropad start being sent from the keyboard when its bound on so the keycode sends and works like it should.
the keyboard only option tells mame to drop "all" retropad binds
the retropad option tells mame to drop "all" keyboard inputsthis is all options covered so ipac users can choose a setup for them
hope this makes sense to you
-
@grant2258 - Ah, the light bulb turned on, thank you very much. Just more question if it's easy. What do the
Input Interfaceoptions do, if anything, when legacy mode is disabled? -
About 14 things just snapped into place all at once. ;)
-
honestly it will function the same all legacy disabled does at the moment is hide the tab menu and uses separate config files. Its at a stage now where it can be worked on without modes disturbing each other.
-
Ok, I see what you're saying now that makes sense when you say it's incomplete at the moment. There's a way to go on the RA side.
Well dang, I would hate to try and put all that in a manual and have it make sense. Whoever dreamed up RA, all I can say is--wow. I have no idea if it's possible to simplify but you can't deny it's flexibility.
There's a few more pieces that I think I can figure out while actually messing with the configs.
I really appreciate you explaining all you did it means a lot. Heading out here as my daughter and wife both caught Influenza A. I've been clean so far but we'll see in a few days. It's hard not to catch living under the same roof. Thanks again, good sir! ;)
-
No problems at all it a subject that bites you in the ass until the penny drops. To be fair this is advanced user stuff. This all had to be figured out by me and mark trust me it was no picnic at the start.
I hope your daughter is ok but you are right once its in the house or workplace its not good. Ive been lucky this year so far just a few sneezes. I dont own a ipac but to me its the best offers we can give users of an ipac if you disagree or thing anything needs removed just say you use the device.
Im winding down on the input stuff im happy with legacy mode and is what I use so thats enough for me. Im sure mark will work on the RA end he done a good job with the retropad type mappings im sure he can make the controls menu works a lot better in time for RA. Ill focus more time into driver fixes ect.
-
@grant2258 - That's a new saying for me, I'll have to remember. I was thinking that on the drive home. Whoever created RA you guys had to pick the pieces and fully integrate it into the core but you did it with class and added multiple options with the Input Interface which is incredibly flexible when you think about it. You guys did a great job. I guess with flexibility comes complexity.
Sorry if I missed it but is audio skew enabled by default? I have a link you guys posted on it but need to read through it tomorrow.
Also not a big deal but thought I would mention it. When I was testing UDb23's Battlezone overlay I accidentally went into Battle for Atlantis (Atlantis.zip) and played a few games. I noticed when you add credits with (keyboard 5) it adds 6 credits at a time but when you use (keyboard 6) it adds 1 one at a time. I tried in and out of focus! :)
-
This is normal behavior sometimes (is in the case of this game well the driver is setting it to this).
I checked the dip switches check the coinage yourself you can see a is set to 1/6 (1 coin 6 credits) and b is set to 1/1. is not an input issue in this case so you can rest easy. Coin shoots dont really always apply per player per say. It can change per machine some have two slots and each slot might accept a different coins like 20c or $1.
audio skew is on by default if you want to leave it off put advance settings on, then go to audio -> settings and change maximum timing skew to to 0.03 (restart the core) and it wont matter if its on or off. Again this is set to on my default so users dont have to go through settings.
-
@grant2258 - Ok, that makes sense. I think I read a post by you on Github a long time ago about arcade manuals and since then I've dug up several service manuals. The dip switches need tweaked for several games (like lives, credits to start, etc.) to what they recommend in the manual.
Like Dragon Spirit defaults to a harder mode and only 2 lives by default vs. what the manual recommends. Those arcade manual are pretty handy. If there's a game that seems really easy or really hard I will try and find the manual to verify the settings. There's just to many games to verify them all though.
I am ok with leaving audio skew on. I was playing around with the setting and I couldn't quite remember which way was the default. Is there a way to reset the Options to default from within RGUI? I usually just delete the core options file from the command line but it would be handy right through the menu.
Also I appreciate you sharing all the information yesterday. It still all makes sense today. :) I made some notes (copy-n-paste) of key points you made that helped me in particular along with the user case scenarios I find are a very handy reference.
-
@Riverstorm only way to reset the core options is to remove them from the file or delete the file.
-
Apologies if this has been addressed.
I'm on Jessie with a Pi3B and on an older version of Retroarch 1.7.1 and installed mame2003plus a few months ago. I've been testing a few of the games and noticed with games such as Double Dragon and Dungeons and Dragons Shadows over Mystara, that the gameplay runs very slowly with audio being very choppy. Could I ask please whether there might be any settings in Retroarch that I could change for these games to run full speed?
Other games run full speed with no problems in mame2003-plus and the same games seem to work fine in AdvanceMame.
Thanks for any help.
-
@grant2258 - Ok thanks, that's what I have been doing. If I think there's any changes to the core settings I just delete it and do a quick reconfigure after updating.
@spud11 - I can't test the audio right now (I am on a monitor) but as far as speed they seem to run smooth for me. Both ran a consistent 57 to 59 FPS just playing around at the beginning of each.
I am on a Pi 3B+ (overclocked), RetroPie 4.4.8, m3plus commit 64ca790 both running a shader (crt-pi).
I haven't done any special config changes. -
@spud11 - Also with D&D Shadows over Mystara 4 players on screen seems pretty smooth in the first part of the game showing like 59.7 FPS.
-
@Riverstorm Thanks for that. Probably something to do with my system. I'll have to play around a bit with it.
-
@spud11 - I just tested the audio and it works fine on both games.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.