Does CLRMamePro works on Mac?

chubsta

@mitu said in Does CLRMamePro works on Mac?:

[CMPRO SETTINGS]
Adv_HideWindow = off

thanks for the reply, I have made an ini and put it in the same folder as the app and still no joy...

mitu

@chubsta I'm not sure how you're running it, but I've been using Wineskin to install or run Windows software on macOS. Not so much nowadays, but seems to work with ClrMamePro (and the settings I mentioned). Of course, the best solution is to use Crossover for Mac, but that's not free.

chubsta

@mitu cheers, although I still cannot get it to work, at least I know now it 'should' work, so I will persevere

mitu

@chubsta Normally I would recommend to try Crossover for Mac, but it's kind of pricey just to run ClrMamePro (though it's well worth the money). Try to use Wineskin - it takes just a bit of learning to start, but it's not complicated and I'm sure there's lots of documentation available (and videos on Youtube).

m2306

I have the exact same problem and I was not able to get this to work on my Mac. I headed over to the emulab forum and got some help there but still no luck.

Clyde

@chubsta @m2306 Please provide more information. "I can't get it to work" is nothing potential helpers can work with.

What did you do exactly? What should have happened and didn't? What happened instead? Were there any errors or other messages? If so, please quote them literally.

hiulit

Hi there! I created a clrmamepro mac app with Wineskin.

Here's the link to Mega https://mega.nz/#!YsxASaLa!w-ETwVx08EhT9bnaffp3PUJGeYyNiPhS35S5P8EdBs8

Just unzip it and run the .app.

It's the latest version clrmamepro 32bit 4.035 downloaded directly from the official website.

chubsta

@Clyde thanks for the reply - basically it doesn't work - no more I can add really, start the app, I see it in the dock and there is no window, even if I make the .ini as suggested by mitu...

hiulit

@chubsta try the link above. It's a mac port of crlmamepro I created with wine. It's a self contained app. I tried it on my mac and it works. It has the .ini @mitu mentioned

chubsta

@hiulit said in Does CLRMamePro works on Mac?:

@chubsta try the link above. It's a mac port of crlmamepro I created with wine. It's a self contained app. I tried it on my mac and it works. It has the .ini @mitu mentioned

I did try it and although I got further than before - ie at least a window came up - I got the following error:
'ERROR! Cannot write to info.plist, there are permission problems, or you are on a read-only volume.
This cannot run within a read-only dmg file'

It isn't a read only volume, and I have obviously unzipped the .app... when I 'get info' on the app it shows I have read/write permissions

any ideas?

hiulit

@chubsta hmmm I'll take a look and I'll get to you :)

hiulit

@chubsta When did you get that error?

hiulit

@chubsta said in Does CLRMamePro works on Mac?:

ERROR! Cannot write to info.plist, there are permission problems, or you are on a read-only volum

I've found this thread http://wineskin.urgesoftware.com/tiki-view_forum_thread.php?comments_parentId=3434 but I don't know... Seems weird. Try moving it to the "Applications folder"... Or try "Right-click -> Open" the app...

I just used it and it works for me. I really don't know what else to say. The only thing is that I found that the RetroPie docs have a link to a Mac version of Clrmamepro https://github.com/RetroPie/RetroPie-Setup/wiki/Validating,-Rebuilding,-and-Filtering-ROM-Collections#rom-management-tools

You could try that one (cross fingers)

chubsta

I have tried the 'official' app ind it doesn't do anything at all, just shows an icon in the dock but nothing else happens.
With the one you uploaded I have tried moving it to various different drives and the result is always the same - as soon as I try to run it the alert comes up saying 'error etc' - so at least yours is getting further!

Not sure where to go from here but will keep trying stuff

chubsta

@hiulit I tried on all my normal Mac drives (I have six connected) and it wouldn't work on any other. In desperation I put the app on a 4gb usb flash drive I have and it seems to be working! It threw up a few errors saying various xml files could not be written but then brought up the main windows - I cannot test it thoroughly as I am currently downloading a new RomSet to work on but it has allowed me to import the .dat file so it seems fine.

As the usb drive is fat32 and all the Mac ones are either HFS or APFS then I can only surmise. that was the issue - thanks very much for your help, and for the app, hopefully anyone else having a similar issue will find this thread useful

mitu

@chubsta Have you tried copying the .app file to your ~/Applications folder and run it from there ? Remember you'll have to edit that .ini file inside the folder somewhere.

chubsta

@mitu yes, tried that initially, for some reason it will only work for me in a fat drive, not apple.

not the end of the world though, at least it seems to be working, now all i have to do is learn how to use it!

hiulit

@chubsta I'm glad it's finally working :)

ohmycommodore

@hiulit Just getting into this finally. Have you built an up to date version since this post?