Boot to rom using lr-mame2003-plus

mahoneyt944

@mitu yeah I don't understand why. when I boot through es the es log shows this

lvl2: Attempting to launch game...
lvl2: /opt/retropie/supplementary/runcommand/runcommand.sh 0 SYS arcade /home/pi/RetroPie/roms/arcade/tron2.zip
lvl2: Creating surface...
lvl2: Created window successfully.

when I copy below to my autostart.sh file it doesn't load to the game I just goes to "thepi@retropie:~ $" command screen.
/opt/retropie/supplementary/runcommand/runcommand.sh 0 SYS arcade /home/pi/RetroPie/roms/arcade/tron2.zip

but if I change the rom to cclimber.zip using the same command it boots to rom just fine

mahoneyt944

@mitu how can I use that log option while using boot to rom in my autostart file? There's no time to go into the menu when booting up. It goes right to the command line screen.

mitu

@mahoneyt944 Are you running the command over SSH or from a keyboard plugged-in ? If you're running it over SSH, the prompt will appear in the SSH session, not on the TV/Monitor screen.

BuZz

@mahoneyt944 btw you can use backticks ` around single code lines or three above and below code blocks for easier reading. Else underscores will be translated as markdown / styling.

SYS

Vs

_SYS_

mahoneyt944

@mitu I just put the boot to rom command in the autostart.sh file and reset the pi. I'm still new to the pi.

mahoneyt944

@BuZz idk what mark down styling is or when I'd want to use or not use it.

mitu

@mahoneyt944 I don't understand - does your PI system reset after you added that line or you just let me know that you've added the line and then restart the system ?
As @buzz explained, it's easier to add your script/commands surrounded by ```, so that they become easier to read and they're automatically formatted by the forum.

mahoneyt944

@mitu I use:

/opt/retropie/supplementary/runcommand/runcommand.sh 0 SYS arcade /home/pi/RetroPie/roms/arcade/cclimber.zip

in my autostart.sh (boot to rom) and it works. Then I change it to:

/opt/retropie/supplementary/runcommand/runcommand.sh 0 SYS arcade /home/pi/RetroPie/roms/arcade/tron2.zip

and it doesn't work. Tron works when booting from es but won't load if I try boot from rom using my autostart.sh I noted that any rom that uses my default arcade emulator ( Mame 2003) works when using boot to rom via the autostart.sh .....only Tron, which uses Mame2003plus will not load using this method .

mitu

Unless you're able to provide a detailed log file for RetroArch (via Runcommand), I can't help you further. There's no need to re-repeat your command line over and over.

I advise you to exit Emulationstation, then launch the command line - like it's written in the autostart script- , use the launch menu (press any key during launching dialog) to enable verbose logging, get the /dev/shm/runcommand.log file and upload it to pastebin.com.

mahoneyt944

@mitu well I'm at a loss now. I exited es like you said typed the same command line I've been trying and it boots to Tron just fine. I enabled verbose loging but it was successful so idk if that's going to help since it's not logging the error since it wasn't launched from the autostart file..... It seems the only time the command doesn't work is through autostart.sh otherwise it works as intended. https://pastebin.com/rNgn9vt2

grant2258

not looked into this but it could be autostart is running as root try

sudo -u pi /opt/retropie/supplementary/runcommand/runcommand.sh 0 SYS arcade /home/pi/RetroPie/roms/arcade/cclimber.zip

mahoneyt944

@grant2258 ok I added the sudo -u pi part and was able to boot into verbose logging heres the file with error: https://pastebin.com/Jn7782aU
still didn't boot with sudo command added.

grant2258

do you have a extra newline somewhere ?

Executing: /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-mame2003-plus/mame2003_plus_libretro.so --config /opt/retropie/configs/arcade/retroarch.cfg "/home/pi/RetroPie/roms/arcade/tron2.zip
" --verbose --appendconfig /dev/shm/retroarch.cfg

grant2258

try

sudo -u pi -- /opt/retropie/supplementary/runcommand/runcommand.sh 0 SYS arcade /home/pi/RetroPie/roms/arcade/cclimber.zip

mahoneyt944

@grant2258 I tried

sudo -u pi -- /opt/retropie/supplementary/runcommand/runcommand.sh 0 _SYS_ arcade /home/pi/RetroPie/roms/arcade/tron2.zip

and

sudo -u pi /opt/retropie/supplementary/runcommand/runcommand.sh 0 _SYS_ arcade /home/pi/RetroPie/roms/arcade/tron2.zip

in my autostart file neither work....

mitu

@mahoneyt944 the (1st) log file you posted doesn't show an error, except this one:

[libretro ERROR] cpunum_get_localtime() called for invalid cpu num!

which I don't know if it's fatal (the ROMs seem to load fine), but doesn't look like there's any other error. Maybe there's a timing problem during boot that prevents RA from starting - can you disable the splashscreen (image/video) from the RetroPie-Setup ?

I see you're using RetroArch 1.7.1 and an older Mame2003-plus version, what version of RetroPie are you using ? Please add more details about it - https://retropie.org.uk/forum/topic/3/read-this-first.

I'll try to replicate the issue, but I'll have to install Mame2003+ first.

@grant2258 autostart.sh is executed as the pi user, after autologin; the initial command line was probably truncated during copy/paste.

mitu

OK, so it works for me, here's the content of my autostart.sh:

/opt/retropie/supplementary/runcommand/runcommand.sh 0 _SYS_ arcade /home/pi/RetroPie/roms/arcade/tron2.zip
# emulationstation #auto

For the record, my splashscreen is set to a static image, the default one in RetroPie.

mahoneyt944

@mitu I just fully installed a new image , it's 4.4.9 I believe. I could try to update retroarch though, not sure why it wouldn't be the newest... And my arcade cores too. I also use a video splash screen, the sonic one where he runs back and forth to make the retropie lettering. It seems my issue is specific to mame2003plus as I can boot to any rom using Mame2003 as the emulator.

What is the default retroarch when installing the new 4.4 image? Maybe retroarch has updated since that image was made.

Also, did you look at the second log file I posted?
https://pastebin.com/Jn7782aU
See the end of the log where it fails.

Retropie 4.4.9
Rpi3b+ over clocked
New image installed beginning of March.

mitu

@mahoneyt944 said in Boot to rom using lr-mame2003-plus:

It seems my issue is specific to mame2003plus as I can boot to any rom using Mame2003 as the emulator.

Is the ROM working when launched through Emulationstation ? You said it does.

What is the default retroarch when installing the new 4.4 image? Maybe retroarch has updated since that image was made.

Most likely yes, there is an update to 1.7.6 since the 4.4 image was released.

Also, did you look at the second log file I posted?
https://pastebin.com/Jn7782aU
See the end of the log where it fails.

That one fails because if you're using su for the command line, so it's normal. The error message means that the ROM file cannot be found.

Retropie 4.4.9
Rpi3b+ over clocked
New image installed beginning of March.

Is this a RetroPie image or a 3rd party image ? A fresh RetroPie image does not have the version 4.4.9.

I also use a video splash screen, the sonic one where he runs back and forth to make the retropie lettering.

DId you try disabling the splashscreen, as I said earlier, and see if the ROM starts ?

BuZz

The error in your last log is due to a linefeed in the rom path.

Executing: /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-mame2003-plus/mame2003_plus_libretro.so --config /opt/retropie/configs/arcade/retroarch.cfg "/home/pi/RetroPie/roms/arcade/tron2.zip
" --verbose --appendconfig /dev/shm/retroarch.cfg

and here:

[libretro INFO] [MAME 2003+] Content path: /home/pi/RetroPie/roms/arcade/tron2.zip
.

you need to put it all on one line without a newline in the middle.