Announcing Pegasus Frontend

fluffypillow

Yeah I should stop doing releases late at night...

@Darksavior ok, should be fixed now. I think removing the binary is how the ReroPie setup script operates, I wonder if that could be customized? Will also see if I can improve the release uploading, sometimes things seem to get lost on the way...

@msheehan79 ah yes that wasn't intended. I've reduced the \n replacing to the description and summary fields now, which were the original targets. Will also make some way to write \n there too later.

@wallmachine not inside Pegasus, yes. I'd prefer not to add Windows-, device- and emulator-specific code if it can be avoided, but this seems to be something one could control well from scripts. Maybe you could contact the developer, perhaps they already have a set of scripts or commands you could call with Pegasus.

EDIT: I've just found some documentation on their page, this could help with writing scripts.

jerzeeloon

Anybody else running front end with ROMs on external storage on shield TV? I'm wondering if it's normal for the front end to take quite a while to initially load ROMs from external hard drive when I was running from the internal storage I had about 3,000 games that loaded fairly quickly now on external I have about 5,000 tried with both the HDD and SSD And it takes a couple minutes to say how many games found then another minute to go into the frontend but when I exit a emulator after playing a game it goes right back the front end and loads up fairly quickly I don't know if it's a bug or its just because the amount of games/assets?

fluffypillow

@jerzeeloon there have been reports of slow USB access, but it seems to be depending on the device. Do you see anything out of order in the log file (<storage>/pegasus-frontend/lastrun.log)?

fluffypillow

Weekly update! The week was more spent with experimenting and trying out a few things, so only some smaller changes this time:

Added support for disabling the mouse cursor if needed
Fixed the file selector not appearing for multifile games
Fixed the main theme not remembering the last launched game

Also there'll be likely no updates next weekend (I'll be away for a few days).

spartan

@fluffypillow is there a way to configure/map controls inside pegasus-frontend and tell retroarch to use that configuration from pegasus-frontend?

fluffypillow

@spartan not yet :(

carlhungus74

Hello,
I test Pegasus-fe since some times, and it's very promising. Unfortunately, it's difficult to find new themes.
I 've find only an additional one (very nice, so it's the one I used)...

I've just a question, and don't find it in the docs. Is there a way to change the video playback volume ? or simply disable the video snapshot sound ?

AndersHP

@carlhungus74
I too would like this volume-feature, I would guess that the video playback is consistently about 30% louder than the actual game sound.

Magma

I just installed Pegasus this morning and really like the look of it. I'm currently using a SN30 PRO controller from 8bitdo and I have them configured and working properly in the front end. When I launch a game they don't work however the keyboard I have attached does work. The controller works perfectly in EmulationStation.

Any suggestions on how I can fix this?

mitu

@Magma You'll need to configure the controller in your emulator also, Pegasus is just the frontend, has no influence on the emulator's settings.

Magma

@mitu I have to configure it per emulator even though it worked fine in EmulationStation on Retropie? How would I go about doing this? I didn't see a per emulator option in Pegasus.

Is there a way to just copy the settings that were used in EmulationStation?

mitu

@Magma You didn't mention you're using RetroPie. If you configured the controllers in Emulationstation, at least the RetroArch cores should work. Can you get a verbose log from Runcommand from a RetroArch based emulator ? and post it on pastebin.com ?

Magma

@mitu Sorry I'm a bit inexperienced. Is there a command to run from a prompt for that or something?

mitu

@Magma When starting a game, use the Runcommand launch menu to enable verbose logging. After the game is run or you exit it - get the /dev/shm/runcommand.log file and post it on pastebin.com.
And add some more info about your setup - https://retropie.org.uk/forum/topic/3/read-this-first.

Magma

Pi Model or other hardware: 3B+
Power Supply used: CanaKit 2.5A USB Power Supply with Micro USB Cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ (UL Listed)
RetroPie Version Used (eg 3.6, 3.8.1, 4.1 - do not write latest): 4.4.12
Built From: Premade RetroPie image
USB Devices connected: Logitech keyboard
Controller used: 8bitdo SN30PRO
Error messages received: NA
Log found in /dev/shm/runcommand.log (if relevant): https://pastebin.com/Ae3W6FzB
Guide used: NA
File: NA
Emulator: Retroarch SNES
Attachment of config files:
How to replicate the problem: Launch a game from Pegaus Front End. Controller works in front end but not in game.

mitu

@Magma The log shows the controller is not configured for RetroArch:

[..]
[INFO] [udev]: Keyboard #0 (/dev/input/event0).
[INFO] [udev]: Plugged pad: Pro Controller (1406:8201) on port #0.
[INFO] [udev]: Pad #0 (/dev/input/event1) supports 0 force feedback effects.
[INFO] [Autoconf]: 0 profiles found.
[INFO] [Autoconf]: no profiles found for Pro Controller (1406/8201).
[..]

Re-configure the controller in Emulationstation - Controller Configuration - and try again.

fluffypillow

@carlhungus74

I test Pegasus-fe since some times, and it's very promising. Unfortunately, it's difficult to find new themes.

Yes, there aren't too many yet, hopefully it will get better in the future! (I should also update the theme making tutorials)

@carlhungus74 @AndersHP the playback volume is based on the system's main volume. I think it'd be possible to change that with eg. amixer when Pegasus starts up or launches a game.

@Magma Unfortunately the gamepad setup is not shared with the emulators yet on RetroPie. Would like to add this feature eventually though!

Magma

@mitu I rebooted the Retropie and reconfigured the controller. Loaded a game and confirmed it was working.

Exited EmulationStation and loaded Pegasus. Launched a game. Controller works fine in the front end but still does not work at all once a game is launched.

Here is the pastebin of the log. https://pastebin.com/X4DnRkLn

Looks like the same issue.

mitu

@Magma I think I know what's the issue - you're running Pegasus as root or via sudo, while Emulationstation runs as the user pi. As a consequence, the auto-configuration folder - where the gamepad configs are stored - are different.
Don't run Pegasus as root / via sudo - it's not advisable and it will break other configurations also.

AndersHP

@fluffypillow said in Announcing Pegasus Frontend:

@carlhungus74 @AndersHP the playback volume is based on the system's main volume. I think it'd be possible to change that with eg. amixer when Pegasus starts up or launches a game.

But wouldn't lowering the main volume lower the volume in the games also, so the issue will remain the same?