Aimtrak Success?
-
@Lamaman1971 said in Aimtrak Success?:
Plus, for some reason whenever I try to map the trigger / gun buttons to controls in mame the results are just a bunch of directional mumbo-jumbo.
When I read this I was thinking that if you are mapping the trigger within the MAME GUI while holding the gun, small movements would send commands that the mapping process probably picks up. You might try setting the gun down and holding it solid so it can't move (or prevent it from seeing motion) and then map the trigger. That way, the only input received is your button.
Just a thought.
-
@caver01 said in Aimtrak Success?:
or prevent it from seeing motion
That's what I do when I calibrate my cabinet. I just aim the guns down, well below the sensor, as I map the buttons. Works very well.
-
Hiya
Can anyone tell me what changes are needed in the RC file. ive been tryin to get my gun working in ADVmame for last few days ive not been having much luck.
-
It has been so long since I set up my Aimtrak I can’t remember, but I’m sure there is a post on this forum that will tell you if you search for it (I think that was how I found out).
When I’m back later I’ll also post the contents of my .rc file in case it’s useful
-
thank you in advance
-
No problem. I’ve been delayed so may not get a chance to post the .RC until tomorrow morning
-
Hi,
Here is a link to my advmame-1.4.rc
I think it was these lines that I edited.
device_mouse raw
device_raw_mousedev[0] /dev/input/mouse0
device_raw_mousedev[1] /dev/input/mouse1
device_raw_mousedev[2] /dev/input/mouse2
device_raw_mousedev[3] /dev/input/mouse3
device_raw_mousetype[0] ps2
device_raw_mousetype[1] ps2
device_raw_mousetype[2] ps2
device_raw_mousetype[3] ps2 -
thank you so much for the help i'll give them a bash :)
-
im one step closer. the cursors are popping up now but when i move the gun its jumping all over the place. :( anyone got any ideas
-
Can you enter the MAME menu (you normally press tab on the keyboard to get into it)?
If so I believe one of the options allows you to turn down the sensitivity of the gun movement.
I think you can set the sensitivity from 1 - 100. I have set mine at 25. I think you need to set sensitivity settings for both the X and Y axis.
-
hi
@tuki_cat just wanted to say a big thank you for helping me ive spent the last 3 hours messing with the .rc file and GUI sensitivity ive got it impoved but its still jumping about quite bad. i think i'll just give it up as a bad job for time being.
-
Hi. I agree that sometimes taking a step back can help.
I don't know what you have referred to in the past, or what guides you have read, so I post this in case its helpful.
The Retropie Docs offer some good guidance (link below), the bits on testing mouse inputs and determining mice index numbers might help.
https://retropie.org.uk/docs/Spinners,-Trackballs,-Lightguns,-and-other-Mouse-Devices/
Have you installed the gunconf utility? It could be the gun calibration that is the issue. this also lets you test the gun.
https://github.com/gunpadawan/gunconf
This thread (link below) has a whole load on informaton that is related to the issues you have had. I have provided part of the thread below which specifically mentions the sensativity issues.
I hope that helps, and I can try and answers questions if I can
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.