剧烈无法正确配置控制器映射

james_shaw

Problem Description:
When running Drastic, I found that it has many keys that cannot be used. For example, the start key does not work, but the up, down, left and right keys and ABXY keys work normally.
When I tried to open the emulator settings menu to manually configure the key mapping, I found that I could not achieve this purpose, because the keys appeared disordered

Information I can provide:

The version of Retropie is the latest 4.5.19, Drastic is downloaded in Retropie setup，the device is Raspberry Pi 4
The controller I use is an Xbox360 compatible controller that works fine on other Retropie emulators, including lr-desmume;
I have installed xboxdrv;
When I tried to refer to the Docs operation on the official website, open /opt/retropie/configs/nds/drastic/config/drastic.cfg on the PC to manually edit the key mapping, I found that there is no drastic.cfg file under this folder. It is drastic.cf2
I tried to open the drastic.cf2 file using notepad ++ and found that it was basically garbled and could not be edited.
I tried to switch to another PS2 compatible controller with a hand cable. However, when running Drastic, the problems it encountered were exactly the same.

So far I have no better solution, I can only ask for help. Thank you all in advance!

Remarks: My local language is Chinese, the above content is the result of google translation

notthesame

@james_shaw first thing is first the retropie image is dev and is unsupported what ever is messed up is your own hands and 2 drastic is not working properly on raspberry pi 4 if you would like to play it, use it on rpi3 for now nothing we can do.

第一件事是第一，retropie圖像是dev並且不受支持，弄亂的是您自己的雙手，而2 drastic在raspberry pi 4上無法正常工作，如果您想播放它，請在rpi3上使用它，現在我們無能為力。

mitu

DraStic seems to work fine on the Pi4, except the menu is not working right, the selection is wrong on the screen, so trying to enter a menu will activate the previous menu.
The configuration file (drastic.cfg) exists only when a configuration is saved, so it's normal that it doesn't appear by default.

notthesame

@mitu said in 剧烈无法正确配置控制器映射:

DraStic seems to work fine on the Pi4, except the menu is not working right, the selection is wrong on the screen, so trying to enter a menu will activate the previous menu.
The configuration file (drastic.cfg) exists only when a configuration is saved, so it's normal that it doesn't appear by default.

the menu acts strange almost like lag but its like its off set on the menu, idk but the emulator does run great, do you know if we will get atleast a update by the dev, that would be nice.

james_shaw

Thanks for the help, at least I have a little idea, 1 is to try to manually save the configuration so that it generates drastic.cfg, 2 is to wait for the emulator to update.

notthesame

@james_shaw best thing to donif you have pi3, set it up then use that drastic cfg file on pi4 but be sure what you want cos that menu is not working good, I'll try to find a solution, it runs normal on desktop so not sure why but something is effecting with the drivers.

mitu

@notthesame said in 剧烈无法正确配置控制器映射:

I'll try to find a solution, it runs normal on desktop

I didn't know DraStic has a desktop version, I thought it's available only for ARM cpus (Android/RPI).

notthesame

@mitu it's the same emulator, and the menu runs normal on desktop, I assume it's the drivers for the gamepad or something? In retropie it runs like that but on desktop the menu doesn't run glitchy Couldn't we run in retropie but some how when launch, use the desktop I want to say x11 for now? Idk I guess for now, I did try n2 or xu4 a few weeks ago and one ran a bit less glitches out, I'll let you know.