Retropie completely locking up (requiring hard reboot) when attempting to switch from disk 2 to disk 1 in multidisk games.
-
@AssCabbage said in Retropie completely locking up (requiring hard reboot) when attempting to switch from disk 2 to disk 1 in multidisk games.:
has the hash to let me downgrade to the base image and see if that fixes it :/
I've posted in the other topic that. I'd be interested to also see your configuration files:
/opt/retropie/configs/all/retroarch.cfg
/opt/retropie/configs/psx/retroarch.cfg
- any
opt
files from/home/pi/.config/retroarch/config/PCSX-ReARMed/
for the game that locks up RetroArch.
If the file is too large, use pastebin.com. Thank you.
-
@AssCabbage said in Retropie completely locking up (requiring hard reboot) when attempting to switch from disk 2 to disk 1 in multidisk games.:
OK, I've discovered something else.
If I manage to change the disc without it hanging, when I go to quit the game, the system hangs and I can't get back to the RetroPie menu.I took a log from this: https://pastebin.com/KmDL51hM
Has anyone any ideas at all? This is disastrous. Do I just start again and build a fresh image? I only made this card this week.
I have the same problem. When i try to exit from a PS1 game the system hangs. It's something that does not happen all the time.
I am cheking for system updates very often, i start to have the above problem the last 2 weeks. i will try to reproduce it and catch some logs.
-
@windg said in Retropie completely locking up (requiring hard reboot) when attempting to switch from disk 2 to disk 1 in multidisk games.:
i will try to reproduce it and catch some logs.
Can you post your config files - as I asked @AssCabbage in my previous reply ? Use pastebin.com for large files.
-
Pi Model or other hardware: Pi 3
Power Supply used: Official psu
RetroPie Version Used : 4.5.19
Usb Controller : Logitech gamepad F310
Sd card : Sandisk Ultra A1 16GB
i am running roms from a usb stick( Sandisk Glide 32gb)The games that i saw this problem : Final Fantasy VIII(USA), Parasite Eve 1(USA), Driver II(USA).
psx/retroarch.cfg :
# Settings made here will only override settings in the global retroarch.cfg if placed above the #include line input_remapping_directory = "/opt/retropie/configs/psx/" #include "/opt/retropie/configs/all/retroarch.cfg"
-
@mitu
Here's the files you requested, this is before I attempted the downgrade.Let me know if you see anything. I'm going to attempt the downgrade now.
-
@mitu
Gah! b8e2ded403bf01 brings the old disc swap menu back, but it still crashes when I try to leave the game after changing disc or if I try and change back to disc 1 :/ -
From what I see, there's nothing out of the ordinary in the @windg's configs (or options).
@AssCabbage you seem to have uses 'Save config' in-game, but the.opt
file seems to be ok.I'll try one of the games mentioned, maybe it's game related - I still cannot reproduce the issue with the multi-disc games I have.
-
I've saved config for all the games so I can activate the dual shock controller for games that use it.
-
@AssCabbage said in Retropie completely locking up (requiring hard reboot) when attempting to switch from disk 2 to disk 1 in multidisk games.:
I've saved config for all the games so I can activate the dual shock controller for games that use it.
You can do that with a game input override, it's a smaller config file.
-
I find a way to reproduce the problem with the lock up on exit and during disk change. I use Disk1 and Disk 4 from Final Fantasy VIII (USA), no save files are required.
1.) Lock up on exit.
I start the game from disk 4 and choose new game. It will ask for disk 1, from the retroarch menu i switch to disk 1. When the intro from the game starts to play, i press the combination keys to exit. then. the retropie stop responding.
2.) Lock up during disk swapping
I start the game from disk 4 and choose new game, It will ask for disk 1, from retroarch menu i switch to disk 4(again), after the wrong disk message It will ask for disk 1, then i switch to disk 1 and the retropie stop responding.
-
Pretty much @windg , but I don't need to go into a valid swap situation. Just wait until it's not reading from the disk and change over and back and it crashes.
-
1.) Lock up on exit.
I start the game from disk 4 and choose new game. It will ask for disk 1, from the retroarch menu i switch to disk 1. When the intro from the game starts to play, i press the combination keys to exit. then. the retropie stop responding.
retroarch.logThat looks like a different issue - at this point RetroArch doesn't even run.
2.) Lock up during disk swapping
I start the game from disk 4 and choose new game, It will ask for disk 1, from retroarch menu i switch to disk 4(again), after the wrong disk message It will ask for disk 1, then i switch to disk 1 and the retropie stop responding.I see, so you're not using the new disk swapping feature - you're running the
discgame from the disc directly. I always use them3u
file to run multi-disc games and now I just swap the disc, without browsing for the new disc.I tried also Driver 2, but couldn't get it to lock RetroArch.
-
The lock up on exit, what should happen here? From my log it looks like retroarch closed successfully. Also, since downgrading didn't fix it, it looks like it's not actually retroarch that's the problem. Is there anything else we could try downgrading?
-
@mitu said in Retropie completely locking up (requiring hard reboot) when attempting to switch from disk 2 to disk 1 in multidisk games.:
I see, so you're not using the new disk swapping feature - you're running the disc from the disc directly. I always use the m3u file to run multi-disc games and now I just swap the disc, without browsing for the new disc.
This happens for me with all methods. I moved to the m3u as nothing else was working.
-
@AssCabbage said in Retropie completely locking up (requiring hard reboot) when attempting to switch from disk 2 to disk 1 in multidisk games.:
Also, since downgrading didn't fix it, it looks like it's not actually retroarch that's the problem. Is there anything else we could try downgrading?
Well, did you upgrade anything else besides RetroArch ? The other part of the emulator is
lr-pcsx-rearmed
, which does the actual emulation - but if you started with a clean 4.5.1 image and only upgraded RetroArch, there's no downgrade to do. -
To clarify, on the test image, I just installed sixaxis and put Metal Gear Solid on it and showed that it worked.
On the actual problem image, I updated everything immediately after installation (as a guide I was following said to do this). This has never worked correctly. I'm doing a kernel update to see if that helps, but when that's done, could we try putting PCSX rearmed back to the version that comes with the default image?
-
@mitu Still the same after the kernal update.
-
@AssCabbage Is your new test system working fine with the new RetroArch and the old
lr-pcsx-rearmed
? I got the impression that downgrading RetroArch didn't help, after starting from the stock RetroPie image (4.5.1) and downgrading to 1.7.9.2 or 1.7.6. -
i replace the ir-pcsx- rearmed core with the one i download from here and no more lock-ups . Maybe the new version of pscx-rearmed core have some issues.
-
@windg said in Retropie completely locking up (requiring hard reboot) when attempting to switch from disk 2 to disk 1 in multidisk games.:
Maybe the new version of pscx-rearmed core have some issues.
It might be, but the disc control changes have been added before 1 Feb to the core. How did you pick up that build date ?
I tested using the method you've used to change discs and didn't get a crash - I'm using the latest version of the core.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.