(REQUEST) Add Daphne Singe emulator?

gomisensei

@pjft badlands doesn't seem to work, even after changes to the Makefile the log shows

YUV overlay is done in software (ie unaccelerated).
Booting ROM ...
Write to ffff with 0
Write to ffff with 0
Write to 1 with 0
Write to ff with 0

repeating over and over and no video shows, tho I can still exit cleanly.

edit: tried the prototype rom as well, threw up different numbers, but same result.

pjft

@gomisensei Thanks for checking.

Do you know if it works on Windows/other OS? Road Blaster did, which led me down the right path.

I don't have the game to test, but in this case it was really a matter of a data type cast that was causing the wrong memory address to be read and written to.

gomisensei

@pjft said in (REQUEST) Add Daphne Singe emulator?:

@gomisensei Thanks for checking.

Do you know if it works on Windows/other OS? Road Blaster did, which led me down the right path.

I don't have the game to test, but in this case it was really a matter of a data type cast that was causing the wrong memory address to be read and written to.

not sure, i don't have the emulator set up on windows, but according to the Dragons Lair project, it IS working in daphne...

Edit: just tested on windows, seems to work...

pjft

@gomisensei Thanks.

...I may look into it at some point, but it's not a short term priority. Feel free to ping me here if I haven't updated the topic in 3-4 weeks.

I don't have the game, and I have a few other things on my plate. And it depends if I can get it to work on Linux, as that's what helped me figure out what was not working on the Pi. So a few "ifs".

Thanks.

Darksavior

@pjft Amazing, Road Blaster finally works! Thanks.
Not sure if it's the latest pi updates or retropie's daphne emulator needs to be updated for it, but I get a black screen when using the new kms driver. I had to go back to the fkms driver to get video.

pjft

@Darksavior Interesting - but was it working before on the kms driver?

I can assure you that nothing was changed on that end, so I'm curious: if it was working before, and you can reinstall it from somewhere from source to make it work like before I can let you know what to change in the source.

If it wasn't before, I don't have any ideas - maybe trying sudo xinit and seeing if it helps?

roslof

@pjft FWIW: Bega's Battle (bega) is indeed working now. So good, man!
EDIT: Looks like @gomisensei already reported this. :)

Darksavior

@pjft Oh, I wasn't meaning to say that you did something. The prebuilt binary is giving me the same issues. Might've been a new driver update since the last time I tried.

pjft

@Darksavior Didn't read it as if you were suggesting I did - I was just curious if installing the new version had broken something on your setup, and trying to figure out workarounds :)

At least we now have Time Gal and Road Blaster on RetroPie, which is awesome!

By the way, maybe you can help me grok the controls here. I know the crosshair is used to aim at some point in the game, but other than that does it influence the steering directions? I can't quite get to grips with the game reacting to my steering controls reliably, but maybe it's because I'm thinking that the crosshair represents the steering wheel direction. For the directions is it more of a "tap the direction when the arrow shows" game like Dragon's Lair/Time Gal, and am I just being tricked by the crosshair location?

shavecat

Hey ,
Can i make another Daphne only for Singe ?
just wanna put the singe roms on my harddrive .
And i can run them for the retropie itself like daphne ?
thanks :)

pjft

@shavecat What do you mean? Run things from ES?

What I did on my side of things was call all Singe games (well, only Time Gal, really) "+Start Timegal.sh" as that way it runs that shell script, and it just has

cd <folder of singe binaries>
./run.sh timegal

So that's that. Ah, you need to change the es_systems.cfg script in /etc/emulationstation (I believe) and add ".sh" to the Daphne accepted extensions.

I'm sure there are other approaches, maybe others can share their approaches - I didn't mess with emulators.cfg though I imagine that could have been an option.

shavecat

@pjft
thanks a lot
will give it a try ! :)

skj

@pjft

Bandlands is now working but the sound cuts off on the intro

shavecat

@skj
Really which rom did u use ?
I only getting a black screen in the beginning ...

skj

@shavecat said in (REQUEST) Add Daphne Singe emulator?:

@skj
Really which rom did u use ?
I only getting a black screen in the beginning ...

I have 2 badlands roms in my roms folder :-

badlandsp.zip (9kb)
bl_hit_12f.bin
bl_hit_4f.bin
bl_hit_6a.bin
bl_hit_7a.bin
bl_hit_7c.bin
bl_hit_9c.bin

badlands.zip (13kb)
badlands.a13
badlands.a14
badlands.c4
badlands.c8

badlands.daphne
badlands-pc.dat
badlands-pc.m2v
badlands-pc.ogg

Hope that helps

pjft

I was intrigued, as the compatibility list did state "work, with issues".

That does save me some trouble then :)

shavecat

can i make the daphne full screen ? like stretch ?

cant run the singe roms...
getting this on my runcommand.info -

Hello logfile - runcommand-onstart checking in here
Parameters:
Executing: SDL1_VIDEODRIVER=dispmanx SDL_DISPMANX_WIDTH=1920 SDL_DISPMANX_HEIGHT=1080 /opt/retropie/emulators/daphne/daphne.sh "/media/usb0/roms/daphne/singe/maddog.sh"
ls: cannot access '/proc/kcore': No such file or directory
--DAPHNE version 1.0.13
--Command line is: /opt/retropie/emulators/daphne/daphne.bin maddog vldp -nohwaccel -framefile /media/usb0/roms/daphne/singe/maddog.sh/maddog.txt -homedir /opt/retropi$
--CPU : UnknownCPU 0 MHz || Mem : 0 megs
--OS : Linux 4.19 || Video : Unknown video
--OpenGL: Compiled In
--RGB2YUV Function: C
--Line Blending Function: C
--Audio Mixing Function: C
Setting alternate home dir:
/opt/retropie/emulators/daphne
ERROR: Unknown game type specified : maddog
Bad command line or initialization problem (see daphne_log.txt for details).
To run DAPHNE, you must specify which game to run and which laserdisc player you are using.
For example, try 'daphne lair noldp' to run Dragon's Lair in testing mode.
Hello logfile - runcommand-onend checking in here

and im trying to run it from sh file

cd maddog
./run.sh maddog

DirtBagXon

@shavecat said in (REQUEST) Add Daphne Singe emulator?:

--Command line is: /opt/retropie/emulators/daphne/daphne.bin maddog vldp -nohwaccel -framefile /media/usb0/roms/daphne/singe/maddog.sh/maddog.txt -homedir /opt/retropi$

You are running the daphne.bin binary instead of singe.bin and trying to run a singe game.

Also:

../singe/maddog.sh/maddog.txt

Is that a real directory ?

As correct command line, should look something like this:

--Command line is: /opt/retropie/emulators/singe/singe.bin /home/pi/.daphne/singe/maddog/maddog.singe -framefile /home/pi/.daphne/singe/maddog/maddog.txt -homedir /home/pi/.daphne -datadir /home/pi/.daphne -sound_buffer 2048 -volume_nonvldp 5 -volume_vldp 30 -x 800 -y 600

You probably need to review you're using the correct run.sh for singe.

shavecat

@DirtBagXon
how do i switch them ?
have it like that

do i need every folder to be -
with .sh (maddog.sh) ?
thanks :)

DirtBagXon

@shavecat

See above for format of singe command, I edited previous response.

You were specifying a frame file at this location:

/media/usb0/roms/daphne/singe/maddog.sh/maddog.txt

What does

ls -al /media/usb0/roms/daphne/singe/maddog.sh/maddog.txt

say ?