Vectrex Overlay Artwork

UDb23

The same goes for aspect_ratio_index = "22" (= custom). The games still start with "core provided" and I have to set it to "custom" manually.

Custom index has been changed to 23 some months ago by the RA developers.... impacting all already existing overlays using 22 in the settings.
Try replacing 22 with 23 and see if it helps with the alignment issue.

Clyde

@UDb23 Argh, I read about the change somewhere, but I somehow remembered 22 to be the new value. So I thought that it's already fixed in my config files. 😒 Thanks for the tip!

Alas, although "23" does fix my two issues about the custom viewport (the games start now with a custom viewport of 940x1200), it didn't change anything about the misalignment. I admit that I didn't expect it to, because any change I do to the viewport in the XMB menu affects both the game's graphics and the overlay alike.

Just for the books, setting video_scale_integer on or off also doesn't change anything about the alignment between the two.

rkoster

I located quite a few more Vectrex overlays than were in the old .zip file, so I have created a github repo here with all of the ones I have: https://github.com/raphkoster/vectrex-overlays

Note that these do not have .cfg files, they are just the overlays themselves. They've mostly been adapted to have PNG transparency so you don't need to set opacity lower than 1 for most of them.

DNuno

...and back to this topic!

Well, I still cannot display overlays in Vectrex Emulation on Retropie.
Note sure if it's because I'm (obviously) doing something wrong, or it's because this topic is a little bit too old and things (emulator) changed over the years?

Anyway, here's my configuration :

VecX 1.2 b78b3d1 on my RetroPie

Let's do the Job for one game : Scramble

I've downloaded the overlay file & configuration file from the link provided by @Lizard and put those files into this directory

pi@retropie:/opt/retropie/configs/all/retroarch/overlay/vectrex $ ls -altri
totale 692
15976 drwxr-xr-x 19 pi pi   4096 ott 14 11:54 ..
  978 -rw-r--r--  1 pi pi 692255 ott 14 11:54 Scramble.png
 5106 -rw-r--r--  1 pi pi     95 ott 14 12:19 Scramble.cfg
88150 drwxr-xr-x  2 pi pi   4096 ott 14 12:20 .

Here's the content of the Scramble.cfg file :

pi@retropie:/opt/retropie/configs/all/retroarch/overlay/vectrex $ more Scramble.cfg
overlays = 1

overlay0_overlay = Scramble.png

overlay0_full_screen = true

overlay0_descs = 0

OK, so what I'm doing next is starting the emulator, then going into its menu, and select :

MAIN MENU -> Configuration -> Load Configuration and select the Scramble.cfg file previously uploaded :

alt text

But selecting this file push me out of the emulator :-(

What Am I doing wrong or what I missed?

Thanks in advance for your help.

Folly

@DNuno

I think you are missing a second config file near your rom.

If you rom is called Scramble.zip , make a config called Scramble.zip.cfg and place this into this cfg.

input_overlay = /opt/retropie/configs/all/retroarch/overlay/vectrex/Scramble.cfg
input_overlay_enable = true
input_overlay_opacity = 0.375000
input_overlay_scale = 1.000000

#custom_viewport_width = "600"
#custom_viewport_height = "800"

#custom_viewport_width = "846"
#custom_viewport_height = "1080"
#custom_viewport_x = "0"
#custom_viewport_y = "0"

#aspect_ratio_index = "22"

#video_scale_integer = true

Hope this works for you.

davej

@DNuno said in Vectrex Overlay Artwork:

...and back to this topic!

Well, I still cannot display overlays in Vectrex Emulation on Retropie.
Note sure if it's because I'm (obviously) doing something wrong, or it's because this topic is a little bit too old and things (emulator) changed over the years?

That version of the emulator you're using is very old. Even before my GPU rendering changes, the emulator was changed to allow scaling/shifting the game screen via game options. One advantage of this new method is it defines values relative to a logical screen, so if you change the screen resolution you are using it automatically adjusts to suit and you don't need to go and edit all your game files.

You should definitely update to the latest version.

DNuno

@Folly My rom name is called : "Scramble.bin"

I have a file in that same (rom) directory called Scramble.cfg

Should I have to rename it "Scramble.bin.cfg" ? following your reply? I tried but it doesn't help anyway :-(

Anyway, here's the content of that file :

pi@retropie:~/RetroPie/roms/vectrex $ ls -altri
totale 704
 2347 drwxr-xr-x 39 pi pi   4096 ott 12 19:38 ..
 4922 -rw-r--r--  1 pi pi   4096 ott 14 11:03 Scramble.bin
69171 -rw-r--r--  1 pi pi    327 ott 14 13:28 Scramble.cfg
88151 drwxr-xr-x  2 pi pi   4096 ott 14 14:45 overlay

...that includes this :

pi@retropie:~/RetroPie/roms/vectrex $ more Scramble.cfg
input_overlay = /home/pi/RetroPie/roms/vectrex/overlay/Scramble.cfg
input_overlay_enable = true
input_overlay_opacity = 0.375000
input_overlay_scale = 1.000000

custom_viewport_width = "846"
custom_viewport_height = "1080"
custom_viewport_x = "0"
custom_viewport_y = "0"

aspect_ratio_index = "22"

video_scale_integer = true

... and inside the file

/home/pi/RetroPie/roms/vectrex/overlays/Scramble.cfg

I have this :

pi@retropie:~/RetroPie/roms/vectrex $ more /home/pi/RetroPie/roms/vectrex/overlay/Scramble.cfg
overlays = 1

overlay0_overlay = Scramble.png

overlay0_full_screen = false 

overlay0_descs = 0

But overlay still not display :-( should I check other settings in the main emulator configuration file (/opt/retropie/configs/vectrex/retroarch.cfg) ?
I tried in there to find a verbose mode to see what happened, but didn't find this option? I do not believe this line is relevant for it -> cheevos_verbose_enable = "false" ?

Any idea to debug this ?

Folly

@DNuno

It only works if i use "Scramble.bin.cfg".

This is what I have :

pi@raspberrypi:~/Desktop/roms/vectrex $ ls Scramble.*
Scramble.bin  Scramble.bin.cfg
pi@raspberrypi:~/Desktop/roms/vectrex $ more Scramble.bin.cfg
input_overlay = /home/pi/RetroPie/roms/vectrex/overlays/scramble.cfg
input_overlay_enable = true
input_overlay_opacity = 0.375000
input_overlay_scale = 1.000000

custom_viewport_width = "846"
custom_viewport_height = "1080"
custom_viewport_x = "0"
custom_viewport_y = "0"

aspect_ratio_index = "22"

video_scale_integer = true
pi@raspberrypi:~/Desktop/roms/vectrex $ cd overlays/
pi@raspberrypi:~/Desktop/roms/vectrex/overlays $ ls scramble.*

scramble.cfg  scramble.png

pi@raspberrypi:~/Desktop/roms/vectrex/overlays $ more scramble.cfg

overlays = 1

overlay0_overlay = scramble.png

overlay0_full_screen = false

overlay0_descs = 0

/dev/shm/runcommand.log should give you "Executing :" :

/opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-vecx/vecx_libretro.so --config /opt/retropie/configs/vectrex/retroarch.cfg "/home/pi/Desktop/roms/vectrex/Scramble.bin" --verbose --appendconfig /dev/shm/retroarch.cfg'|'"/home/pi/Desktop/roms/vectrex/Scramble.bin.cfg"

You can paste this command in your terminal. Though the output does not show how the overlay is loaded.

If it still does not work :
Sometimes there are unseen characters in the beginning of text files. Try to make new configs. Type the first letter and copy paste the rest.

DNuno

It still doesn't work :-(
Can you provide me your full Vectrex configuration file? (mine is /opt/retropie/configs/vectrex/retroarch.cfg)
Because I've done too many modification during my attempts... maybe something is wrong in there since? I would like to compare few parameters.
Thx in advance for your help.

Folly

@DNuno

It's a standard one.

# Settings made here will only override settings in the global retroarch.cfg if placed above the #include line

input_remapping_directory = "/opt/retropie/configs/vectrex/"

#include "/opt/retropie/configs/all/retroarch.cfg"

Do you have a good ovelay picture, can you check with a viewer ?

Perhaps you should update Retroarch and reinstall the vectrex core.