Development of module-script generator for lr-mess, lr-mame and mame standalone

Folly

That would be nice indeed !

Folly

I have made some wonderful improvements !

We can now generate without even having the script on the computer and it will place the generated scripts in the directory for external repository's. 137
It will also install the run_mess.sh script if not detected.

Try this command :

curl "https://raw.githubusercontent.com/FollyMaddy/RetroPie-Share/main/00-scripts-00/generate-systems-lr-mess_mame-2v0-alpha.sh" | bash -s kgradius

ps.
We can use this now, but the normal way still works. So we can use it both ways.

Edit :
Updated quite a lot in the first post.

Folly

@dteam

Something to check I think :
https://retropie.org.uk/forum/topic/30155/lcd-handhelds-mame-0-229-dat

DTEAM

@folly
I don't know if he is aware of what we are doing.

Folly

@dteam

Indeed, but he is very busy.
He has to read quite some stuff, we already know.
I think he will get the jist.

Folly

@valerino

We are a bit curious, have you :

read the first post ?
read the commented parts in the script on how it's working ?
installed some handhelds ?
used the get script ?

valerino

@folly heya :) i've read the first post, yes. but i haven't tried anything, sorry but i've very few time to dedicate to my hobbies at the moment.

anyway, i have some suggestions:

forget the 1st post, have a github (being my repo, or a new one doesn't matter.... and list issues/ideas there)
decide if we want to use my fork or have another, merging mine+folly+dteam work. just, having a single repo imho is the way to go to avoid fragmentation.
push retropie admins to merge this stuff in the official repo :)

DTEAM

@folly said in Development of module-script generator for lr-mess and mame standalone:

@dteam
Indeed, but he is very busy.
He has to read quite some stuff, we already know.
I think he will get the jist.

I was talking about the new thread you mentionned above. I had an answer from him. He is a Global Moderator on this site and he gave me his impression about what we are doing.

https://retropie.org.uk/forum/topic/30155/lcd-handhelds-mame-0-229-dat

Folly

@dteam said in Development of module-script generator for lr-mess and mame standalone:

@folly said in Development of module-script generator for lr-mess and mame standalone:
@dteam
Indeed, but he is very busy.
He has to read quite some stuff, we already know.
I think he will get the jist.
I was talking about the new thread you mentionned above. I had an answer from him. He is a Global Moderator on this site and he gave me his impression about what we are doing.

https://retropie.org.uk/forum/topic/30155/lcd-handhelds-mame-0-229-dat

Sorry , misunderstood, haha.
I wasn't aware of that because I didn't read the stuff.
Will do that.

Edit :
Read it, indeed, seems he isn't aware of specific things,
but strangely enough said that he was inspired by our threads.
Mmmm,......

I did an extra post on the thread !

Folly

@valerino said in Development of module-script generator for lr-mess and mame standalone:

@folly heya :) i've read the first post, yes. but i haven't tried anything, sorry but i've very few time to dedicate to my hobbies at the moment.

anyway, i have some suggestions:

forget the 1st post, have a github (being my repo, or a new one doesn't matter.... and list issues/ideas there)

decide if we want to use my fork or have another, merging mine+folly+dteam work. just, having a single repo imho is the way to go to avoid fragmentation.

push retropie admins to merge this stuff in the official repo :)

Ok, Seems a good plan.

Although you have to take into account, not everyone is that keen on github.
And also, not everyone has a github account.
For me, the syncing and pushing things is something that's still blurry for me too.
So that is why I keep everything here, so everyone can help to improve.

But indeed, with your way of doing, we all could learn quite a bit more.

DTEAM

@folly

Hi Folly,

I've try (for saturn)

curl "https://raw.githubusercontent.com/FollyMaddy/RetroPie-Share/main/00-scripts-00/generate-systems-lr-mess_mame-2v0-alpha.sh" | bash -s saturn

And It doesn't work. Did I do something wrong.

Folly

@dteam said in Development of module-script generator for lr-mess and mame standalone:

curl "https://raw.githubusercontent.com/FollyMaddy/RetroPie-Share/main/00-scripts-00/generate-systems-lr-mess_mame-2v0-alpha.sh" | bash -s saturn

I tried your command.
Works on my end, these are generated in /home/pi/RetroPie-Setup/ext/RetroPie-Share/scriptmodules/libretrocores :
install-saturn-cmd.sh
install-saturn-from-mamedev-system-saturn-cart.sh
install-saturn-from-mamedev-system-saturn-cdrm.sh
It pushes the files to the new separate external repository directory.

If they are not found by the RetroPie-Setup then perhaps you don't have an up to date Setup.
Use this to move your generated files back to the old location.

mv /home/pi/RetroPie-Setup/ext/RetroPie-Share/scriptmodules/libretrocores/* /home/pi/RetroPie-Setup/scriptmodules/libretrocores

EDIT :
For others who read this.
You can miss third party module-scripts easily because,
third party module-scripts are the very bottom of the list in the RetroPie-Setup.
So then above mv command is not necessary.

DTEAM

@folly
It works for me with 1.8 version and not 2.0 . I don't know why
i'll try what you said in you last post.

Folly

@dteam said in Development of module-script generator for lr-mess and mame standalone:

@folly
It works for me with 1.8 version and not 2.0 . I don't know why

Well I explained in the last post.
Ok. You can also use 1.8 that will create it in the old location.

Perhaps I am already too much busy in the future 😁

Curious how saturn will run.

DTEAM

@Folly

Now, It works

Folly

@dteam

Now, It works

Great, let me know how it goes.

I am trying also to keep 1.8 updated.
But if we run it now with the curl command, our own added platform information can't be used because it extract's it from the script.
With 2.0, it will create a new platforms.cfg in the /home/pi/RetroPie-Setup/ext/RetroPie-Share .
With 1.8 I want to do the same so it can work with curl but with this version, meant for older versions of RetroPie, you don't have the ext directory.
If I create that, it will be more confusing. So I am still dubbing about it.
I could do the file somewhere else, but that's not really consistent.

I Think it's just a matter of time, about a month or so, every one will use the ext directory, don't you think too ?

DTEAM

@folly
Yes, I agree.
It worked also before (sorry for the confusion). I didn't see It, because with ext folder, the "package installation lines" are at the deep end of the "manage experimental packages" section (good to know). Probably I was too lazy

Curious how saturn will run.

For now, I have .bin (BIOS) issue, but I'll try to fix that today. see here I'm using .chd.

With

mame-system-saturn-cdrm = "/opt/retropie/emulators/mame/mame -v -c saturn -cdrm %ROM%"

gave this in runcommand.log

cdb106.bin NOT FOUND (tried in satcdb saturn)
Fatal error: Required files are missing, the machine cannot be run.

I need satcdb file

NEW EDIT
I'm running It. It's slow, bad experience with lr-mess and MAME for Sega Saturn. Even if i'm using autoframeskip.

DTEAM

@folly said in Development of module-script generator for lr-mess and mame standalone:

👉 open : Discovered by @DTEAM :
C64 and Atari Jaguar not working

For C64, It seems to be a BIOS issue. It's not the script... I think. I'll continue to dig It.
New edit:
I give up, I am unable to make it work, even with the real romset

New edit: Same thing for Jaguar. I can't figure out why

lr-mess-basename = "/opt/retropie/emulators/retroarch/bin/retroarch --config /opt/retropie/configs/jaguar/retroarch.cfg -v -L /opt/retropie/libretrocores/lr-mess/mess_libretro.so %BASENAME%"

Doesn't work and this

lr-mess = "/opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-mess/mess_libretro.so --config /opt/retropie/configs/jaguar/retroarch.cfg %ROM%"

works

I'm using jaguar and not atarijaguar for testing only

Folly

@dteam

I think BASENAME will only work good with systems that use no media,
like the handhelds.

I tried Arari Jaguar using atarijaguar with :

lr-mess-system-jaguar-cart = "/home/pi/RetroPie-Setup/scriptmodules/run_mess.sh /opt/retropie/emulators/retroarch/bin/retroarch /opt/retropie/libretrocores/lr-mess/mess_libretro.so /opt/retropie/configs/atarijaguar/retroarch.cfg \jaguar /home/pi/RetroPie/BIOS/mame -autoframeskip -cart %ROM%"

I tried C64, I got this far :

Seems lr-mess/mame problem.

Folly

@DTEAM

Seems I have some luck with c64 prg files that run with the quik option (will try some more tomorrow) :