Development of module-script generator for lr-mess, lr-mame and mame standalone

Folly

I have been thinking about it.
I had some doubts but I think it's a good idea.

Do you keep this also in ? :
<game id="41424" source="ScreenScraper">
There are more of these lines, we could make these just :
<game>

I think you know, but for easy downloading the ES-media, I think you have to add a media directory in every system directory where the media goes.
We should do a test first.
But I think it has to like this (as example for all systems) :
konamih/media/kgradius.png
So it's downloads directly in the correct place when I put the path in.

DTEAM

@folly said in Development of module-script generator for lr-mess and mame standalone:

Do you keep this also in ? :
<game id="41424" source="ScreenScraper">

It's from an old "scrape" it should be <game > I agree

DTEAM

@folly

On Retropie we go with the rom folder, but on Google Drive, can I keep the same structure/folder or I change also that?

Folly

@dteam said in Development of module-script generator for lr-mess and mame standalone:

@folly

On Retropie we go with the rom folder, but on Google Drive, can I keep the same structure/folder or I change also that?

The structure of the gamelists on google-drive can stay the same.
Only changing the destination path in our script will do the trick.
If I do the same with the media then this will not work.
I will have a second look, if I can do it with the original structure.
I'll be back with the results.

Folly

@dteam

I had a second look.

For the game-lists, I have no issues with changing the path to the rom directory.
If I do this with the downloaded_images, it puts all .png files inside all the systems directory's.
I don't want to move those files after downloading, so we should change the google-drive folder structure.
Moving the files would also conflict with the lr-mess atwork_overlay .png's that can already be in the same directory.

I think we have to bind both folders on google-drive,
just like we want in our rom directory adding the gamelist.xml and media folder in all system directory's.
Then we can simply use 1 download line in the front-end script.
And if all goes well everything goes to the rom directory in one go.
So we can do a test here.
Can you add the media of konamih into the gamelist folder ?
So you will have a media directory containing the .png's inside this link :
https://drive.google.com/drive/folders/1-HxU0y61KE3d30RUXBki0vwP2tVQh6uo

If you put it there, I will run the script and see if all goes well.
Good idea ?

Edit :
I realized that we can also make the directory structure like this (taking konamih as example) :
-roms
__-konamih (containing the gamelist)
____-media
_______-emulationstation (containing the theme png's)
_______-overlays_lr-mess (containing the overlay png's)

That way we are far more flexible for the future.
Adding things later on and just have 1 media folder inside the rom directory.
Good idea ?

DTEAM

@folly said in Development of module-script generator for lr-mess and mame standalone:

Can you add the media of konamih into the gamelist folder ?

Yes

Good idea ?

Yes, good idea. I'll do that

<?xml version="1.0"?>
<gameList>
	<game>
		<path>./bittboy.7z</path>
		<name>BittBoy Mini FC 300 in 1</name>
		<desc>nes_vt369_vtunknown.cpp</desc>
		<image>./media/emulationstation/bittboy.png</image>
		<marquee />
		<video />
		<thumbnail />
		<rating>0.8</rating>
		<releasedate>20170101T000000</releasedate>
		<developer>BittBoy</developer>
		<publisher>BittBoy</publisher>
		<genre>All in one Handheld console</genre>
		<players>1</players>
	</game>

DTEAM

@folly

I did It for konamih and all_in1

You can test It now with those two. I'll try to find time to do the others.

Folly

@dteam said in Development of module-script generator for lr-mess and mame standalone:

@folly

I did It for konamih and all_in1

You can test It now with those two. I'll try to find time to do the others.

I did a test, but I saw all files are in the same directory.
Is it possible to make the sub-directory's inside all_in1 and konamih so it will look like this ? :
gamelist.xml
media/emulationstation/*.png

DTEAM

@folly
Done. Told me if It's like you wanted.

Folly

@dteam

Perfect.
All files are downloaded in the correct path.
Looks all good !

Can you add .zip also in the gamelist of all_in1, it seems to be missing.
The gamelist of konamih didn't work because of the old entry's, but I think you know that it still has to be edited.

Folly

@dteam

To ease your workload I have changed all gamelists in about 15 minutes.
I hope/think they are all good.
Perhaps you can do some checks too.
I have put them on github.
You can check the diffs here :
https://github.com/FollyMaddy/RetroPie-Share/commit/a542b7399c66b1d9a9e8e1dc6b77048d5b9efb2b

I added the new location in the scripts :
https://github.com/FollyMaddy/RetroPie-Share/commit/bff28b1d898dd254a27c11478b5c6bef99b7979e

Folly

(Moved this reply from an other thread, seems to be more relevant to this thread)

@hhtien1408 said in Request for artists working on themes - needs for (lr-mess/MAME) additions:

@folly @DTEAM
Hi, could you share me how to use lr-mess/MAME Standalone in retropie step by step for

Supracan

NES-Datach

How to build runcommand in emulator.cfg with software list enable? (How to enable?)

I knew how to add system but cannot make it work like official mame 0.231 (in mame supracan -cart <rom>

Noted that I am using lastest lr-mame/mess (default) built from source on Ubuntu 21.04 Gnome40.

Hope to here from you asap!
Thanks for million times!

Hi,

I will try to answer your question.

I dug into this a bit.
Also we have sometimes trouble with using the software lists.
Basically "using the software list" and how this has to be structured is not always clear.
We have actually 3 different types of computers in mame:

bios system games
arcade systems with media
regular computer systems with media

All these systems do not always work the same way, I think, so one solution for one system isn't always one for the other.
That's why, I think, it's sometimes so hard to make a solution for every system.
That is why we run it most of the times without using the software list.
In post 1 of this thread this issue is still open, seems the same problem :
👉 open : Discovered by @DTEAM :
C64 and Atari Jaguar not working with basename
........

That is why I did have a look, because I also want to have lines working in my generated scripts that will work for more systems "using the software list".

For "supracan" you can use my script to generate the module scripts in the ext directory :

curl "https://raw.githubusercontent.com/FollyMaddy/RetroPie-Share/main/00-scripts-00/generate-systems-lr-mess_mame-2v1-ext.sh" | bash -s supracan

Then install them from the experimental packages (scroll to the end, and you will find them(the "cmd" and the "-cart" one).

This is the line for using the softwarelist with mame that I created and tested :

mame-basename = "/opt/retropie/emulators/mame/mame -rompath /home/pi/RetroPie/roms/supracan -v -c supracan %BASENAME%"

The one installed by the generated module-script is different.

For now you can change it manually in :
/opt/retropie/configs/supracan/emulators.cfg

Try this first.

For lr-mess I don't have a solution yet.
With the "-cart" line it boots to the info but then stops working.
Not on my priority list now, but if I have some time I will look at it.

BTW.
Do you have a system name for : NES-Datach
I can't find it.

hhtien1408

@folly I will try your solution for MAME standalone.

With Super Acan, no need to put bios (no bios) into bios/MAME?
Where to put ROM? Bios? Hash xmls?
Does your script setup all?

I asked more for confirmation:

Should I build MAME from source (Retropie-setup script)? Or your script do this step?
Run your script
Put roms into folder (but which folder)
Do you need to create config mame.ini?
Without libretro, could I use overlays and shaders?
Or use fallback artwork like I use in mame 0.231?

About NES Datach info, if I would to play Datach Dragon ball, I will load Datach rom in NES system and use Datach to insert game Dragon Ball
Command line in MAME to run on my laptop with mame 0.231 seperately

./mame64 nes -cart datach -cart2 /Users/H2T/Games/mame/roms/nes_datach/dtc_dbz.zip

Please check link below for Datach
Datach - Scan bar code for MESS
Could you generate script for nes-datach? Just a subsystem nes-datach.

Both supracan and nes_datach run well on official MAME

Hope to hear from you asap.

Folly

@hhtien1408 It's not allowed to share rom links!
You should remove them, asap !

@hhtien1408 said in Development of module-script generator for lr-mess and mame standalone:

@folly I will try your solution for MAME standalone.

With Super Acan, no need to put bios (no bios) into bios/MAME?
You can check with :

/opt/retropie/emulators/mame/mame -listroms supracan

It will output : No ROMs required for driver "supracan".

Where to put ROM? Bios?

Game roms for <system> :
/home/pi/RetroPie/roms/<system> (<system> is here supracan)
BIOS roms :
If needed, BIOS files, depending on what has to be used, go to :
/home/pi/RetroPie/BIOS/mame/<system>.zip

Hash xmls?:
Hash tables are in :
/opt/retropie/emulators/mame/hash/<system>.xml

Does your script setup all?

Indeed, the generated module-script does.
Read the first post of this thread and learn how it's done !

I asked more for confirmation:

Should I Build MAME from source (Retropie-setup script)? Or your script do this step?

You have to install from source in the RetroPie-Setup, if you are on an x86/x86-64 computer.
edit : If you are able to use the binary then I recommend you use that.
You also need to install lr-mess to be able to install the module-scripts.
The module-scripts that are generated with my "curl line" does will only do the configurations when installed in the RetroPie-Setup.

Run your script

Go into the terminal and paste the "curl line" into the command prompt.
This will generate module-scripts that have to be installed in the RetroPie-Setup.

install-supracan-cmd
install-supracan-from-mamedev-system-supracan-cart

Put roms into folder (but which folder)

/home/pi/RetroPie/roms/supracan/<game>.zip

Do you need to create config mame.ini?

Not needed.

Without libretro, could I use overlays and shaders?

Not my expertise but, you can use Artwork, no shaders, I think.

Or use fallback artwork like I use in mame 0.231?

Could work I think.

About NES Datach info, if I would to play Datach Dragon ball, I will load Datach rom in NES system and use Datach to insert game Dragon Ball

Will look at this later

hhtien1408

@folly
You mean your method for lr-mame or MAME standalone? Or work for both?

I would like to ask about this (I changed the path for myself to suitable for Retropie on Ubuntu)

mame-basename = "/opt/retropie/emulators/mame/mame -rompath /home/RetroPie/roms/supracan -v -c supracan %BASENAME%"

It means I will put this line in my /opt/retropie/configs/supracan/emulators.cfg
exactly as the same code above and make it default emulator? Right?

Should I need change a little bit in script before executing for my suitable locations (remove "/pi/)? My current default location is "/home/RetroPie" on Ubuntu.

For normal neogeo roms, Running with lr-mame (mamearcade-libretro.so show the “initializing” and freeze. Wrong bios or romset? Do you face this error yet?

Folly

@hhtien1408 said in Development of module-script generator for lr-mess and mame standalone:

@folly
You mean your method for lr-mame or MAME standalone? Or work for both?

For MAME standalone.
In this thread we only use mame standalone and lr-mess.
lr-mame is not implemented !

I would like to ask about this (I changed the path for myself to suitable for Retropie on Ubuntu)
mame-basename = "/opt/retropie/emulators/mame/mame -rompath /home/RetroPie/roms/supracan -v -c supracan %BASENAME%"

Indeed, you should do that because you are an other user !

It means I will put this line in my /opt/retropie/configs/supracan/emulators.cfg
exactly as the same code above and make it default emulator? Right?

Yes, indeed.
For making it the default you can also press a key when the RetroPie boot-screen comes, press a key, and select your default runcommand line.

Should I need change a little bit in script before executing for my suitable locations (remove "/pi/)? My current default location is "/home/RetroPie" on Ubuntu.

No, not needed.
The module-script will find your user name and use that.
Check those other lines in emulators.cfg, it should already have user RetroPie not pi.

For normal neogeo roms, Running with lr-mame (mamearcade-libretro.so show the “initializing” and freeze. Wrong bios or romset? Do you face this error yet?

You have to press a key when the RetroPie boot-screen comes, then select launch with verbose.
For the mame standalone and lr-mess lines created by my module-scripts you don't need to do this, our lines have always verbose on.
Then run your rom.
After the failed boot, initializing, check your runcommand log in :
/dev/shm/runcommand.log
This will tell you where things go wrong, if you understand it.
With a Bios rom failure you will find something like :
tried in this and that

hhtien1408

@folly I manage to run neogeo under lr-mame by putting bios in neogeo rom folder also (not in /BIOS/mame.).
But how to make command line to run supracan run? (enable softlist, boot from CLI, cart, automatic type )
When I check with lr-mame for supracan, it shows error:

'/opt/retropie/libretrocores/lr-mame/mamearcade_libretro.so' -listroms supracan

Segmentation fault (core dumped)

If I try to run supracan from terminal with command verbose to check error

/opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-mame/mamearcade_libretro.so --config /opt/retropie/configs/supracan/retroarch.cfg '/home/h2t/Downloads/supracan.zip' --verbose

[INFO] [MIDI]: Initializing ...
[INFO] [MIDI]: Input disabled.
[INFO] [MIDI]: Output disabled.
[INFO] [MIDI]: Initialized "alsa" driver.
[INFO] Loading history file: [/opt/retropie/configs/supracan/content_history.lpl].
[INFO] Loading history file: [/opt/retropie/configs/supracan/content_music_history.lpl].
[INFO] Loading history file: [/opt/retropie/configs/supracan/content_video_history.lpl].
[INFO] Loading history file: [/opt/retropie/configs/supracan/content_image_history.lpl].
[INFO] Loading favorites file: [/opt/retropie/configs/supracan/content_favorites.lpl].
[INFO] [GL]: VSync => on
[INFO] [GLX]: glXSwapInterval(1)
[libretro INFO] Starting game from command line:/home/h2t/Downloads/supracan.zip
[libretro INFO] ARGUV[0]=/home/h2t/Downloads/supracan.zip
[libretro WARN] Driver supracan not found -1
[libretro WARN] Game not found: supracan
[libretro WARN] Driver Downloads not found -1
[libretro ERROR] Driver not found: Downloads
[libretro INFO] RES:-2

It seemed lr-mame does not recognize supracan softlist even softlist is enabled. Weird.

P.S. P.S. Why I sticked with lr-mame because I cannot builr lr-mess and MAME standalone (qt5 error) successfully on my Ubuntu.
I run lr-mame with software list perfectly on Retrobat on Windows 10, but no luck with Retropie.

hhtien1408

[deleted]

Folly

@hhtien1408

We don't want to mix up many things here.
This thread is only for discussions about improving our script and about discussing the issues related to that.
Successfully running supracan with mame standalone or lr-mess is part of this discussion and can be discussed over here.
You should stick with that first !

If you want to discuss lr-mame it's better to make your own thread or look for an lr-mame thread and post your problem over there.
I am happy to help you over there, if I can.
You should look also at the retropie-docs first.

hhtien1408

[deleted]