Is it possible to add Watara SuperVision to the current RetroPie 4.7.1?

kcoconnor76

Here is my setup:

Pi Model or other hardware: 4B
Power Supply used: Argon power supply
RetroPie Version Used: 4.7.1
Built From: Pre-made from RetroPie website for Raspberry Pi 4/400
USB Devices connected: SanDisk Ixpand 256GB USB flash drive, 8BitDo Wireless USB Adapter, REIIE USB wireless keyboard
Controller used: Nintendo Switch Pro

kcoconnor76

Or if RetroArch 1.9.3 doesn't contain Watara SuperVision, how do I add the nightly build to my install?

Zering

@kcoconnor76 Supervision works through lr-mess, not sure if it supports Retroachievements though.

kcoconnor76

@zering It appears only Potator supports Retro Achievements. I guess perhaps what I need is to manually install Potator into RetroPie. Is there documentation somewhere on how to install an emulator that isn't currently part of RetroArch?

mitu

You'll have to compile and make sure the new emulator works with Raspberry Pi OS, then you can add a new system for it.

RetroArch version and its cores are usually not dependant on a certain version, but in this case the Potator core does indeed need a higher version of RetroArch. I don't see a pre-compiled version for the core on the libretro buildbot, so you'll probably have to compile one yourself. If you wish to upgrade the RetroArch version, then you'll have to wait until 1.9.3 will be added (probably not so far) or compile it yourself (there's a PR for it here).

That being said, if you intend to develop new RetroAchievements, are you sure RetroArch is the application to use ? I mean you can test the achievements with it, but to develop you may find it easier to use an emulator that can snapshot and compare memory between frames, such as the ones provided by the RetroAchievements project.

kcoconnor76

@mitu I am toying with the idea of installing RetroArch nightly within the Pixel Desktop. Then I could access the Desktop from the Ports menu of my RetroPie install and run just the nightly RetroArch from within the Pixel Desktop. I'm wondering if it would install side-by-side if I do the install through the Desktop or if it would overwrite my existing RetroArch install for RetroPie 4.7.1? I'm not doing Retro Achievement development at the moment, I'm just playing the games.

mitu

As I said, I'm don't think that there's a Potator core pre-built for the Pi (or even a RetroArch binary ? ) so you'd have to build/compile it yourself.

As for overlapping with the version installed by RetroPie - that shouldn't happen, but some of the configuration files might get mixed up, so I wouldn't recommend it. You could try Lakka - a similar SBC distro that's built around RetroArch - which should get you the latest RetroArch version, but I don't think they include - yet - the Potator core.

kcoconnor76

@mitu Understood. I appreciate the help. :)

barbudreadmon

@zering said in Is it possible to add Watara SuperVision to the current RetroPie 4.7.1?:

@kcoconnor76 Supervision works through lr-mess, not sure if it supports Retroachievements though.

afaik, no mame core has retroachievements support, i doubt mess would be an exception

kcoconnor76

It looks like RetroArch 1.9.6 now supports Watara SuperVision (Potator). Can version RetroArch 1.9.6 be added to the RetroPie setup script? I think it currently allows 1.9.5.

mitu

@kcoconnor76 based on the previous posts, wasn't 1.9.3 the version that was needed by the Watara Core ?

kcoconnor76

@mitu It appears the 1.9.3 version I had downloaded was the nightly version and not the stable version. Now the latest stable version 1.9.6 supports Watara SuperVision.

mitu

@kcoconnor76 I don't understand - if RetroArch v1.9.3 supports the core, then surely v1.9.5 should too. You can download the core from libretro's buildbot server and see if it works.

kcoconnor76

@mitu It isn't in the list of downloadable emulators in the RetroPie script. When I downloaded 1.9.5 on my laptop in RetroArch, Potator wasn't listed there either. It was only listed with 1.9.6.

kcoconnor76

It appeared to me the nightly version 1.9.3 did allow Potator to be downloaded, but not the stable 1.9.5. It wasn't in the list.

kcoconnor76

@mitu said in Is it possible to add Watara SuperVision to the current RetroPie 4.7.1?:

I don't understand - if RetroArch v1.9.3 supports the core, then surely v1.9.5 should too. You can download the core from libretro's buildbot server and see if it works

I'll try that.

mitu

@kcoconnor76 said in Is it possible to add Watara SuperVision to the current RetroPie 4.7.1?:

It isn't in the list of downloadable emulators in the RetroPie script.

It isn't, since it's not part of RetroPie.

When I downloaded 1.9.5 on my laptop in RetroArch, Potator wasn't listed there either. It was only listed with 1.9.6.

Downloading cores is disabled in the RetroPie's RetroArch's config. If you want to add a core that's not part of RetroPie setup script, you'll have to do it manually and configure a system for it.

kcoconnor76

@mitu Got it. Thanks.

DTEAM

@kcoconnor76
Follow this tutorial : Development of module-script generator for lr-mess and mame standalone

You'll be able to run Watara Supervision with lr-Mess and MAME standalone

@folly Is it a big deal to create a script for Potator ?

They say a libretro core exit here

dmmarti

I don't see it as an available core for the armhf linux distros (which includes Raspbian OS). So Potator might not be usable on RetroPie yet.

Here's the Libretro nightly download of pre-compiled cores we can currently use.

https://buildbot.libretro.com/nightly/linux/armhf/latest/

Maybe there's something still to code within Potator?