Pixel 3D

mitu

Well, the monitor is 2k

Use raspi-config from the RetroPie system in EmulationStation and force a 1080p resolution, then see if the video looks the same in N64. Alternatively, you can use the Runcommand launch menu to choose 1080p as resolution when starting a N64 game - you can give that a try also.

Xurde000

@mitu Can you explain it to me step by step? I don't speak English very well and I use the translator 🙏

Xurde000

@mitu I just saw what happens to me with almost all the emulators that have diagonal pixels, why does that happen?

mitu

@xurde000 said in Pixel 3D:

I don't speak English very well and I use the translator 🙏

The doc page for Runcommand is pretty explicit and changing the resolution is simple enough just by using the the menu.

Xurde000

@mitu but is it normal that it happens to me in all emulators?

mitu

@xurde000 it's not normal - i.e. doesn't happen for most users - but I suspect the emulators might use a weird or wrong video resolution reported by your monitor. This is why I asked you to change the video resolution to a well known/behaved option.
A verbose log would be useful here, but it might be complicated for a new user to get it and post it in the forums/elsewhere.

Xurde000

@mitu I tried with three screens and the same, if you explain to me how I do the verbose log I do it

mitu

@xurde000 Just to make sure - did you try with the 1080p (1920x1080) resolution and you still get the same artifacts ?

To get the verbose log file, you'll need to:

enable SSH and connect with a program like WinSCP to your Pi, from a PC on the same LAN/WLAN.
run the game and enable verbose logging before launch, as explained in the Runcommand doc page, then exit the game.
copy the /dev/shm/runcommand.log file using WinSCP to your PC and then copy/paste the contents of the file to pastebin.com. Provide the link that pastebin.com will give you here in the topic.

Xurde000

@mitu hello, I could not do it, in the settings trying to install an emulator it tells me that my raspberry is not compatible with the application because it is 32-bit, does it have something to do with it? I understand that it can be set to 64 because it supports it.

mitu

@xurde000 You cannot do what, exactly ? I haven't asked you to install any emulator.

Xurde000

@mitu sorry it was in case it had something to do with it, I'm going to try to do what you told me again