Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first
LCD Problem with driver
-
Hi,
I am trying to configure a 3.5 inch lcd on a raspberry pi 0w, I am following this guide and I can't get it to work (actually the image provided by this page works fine in my lcd), but if i try to configure the driver on retropie image it doesn't work. -
Post Update:
With this command I can display without problem "image-test.gif" in this case, I think the problem is something in the retropie configuration that I can't seepi@raspberrypi ~ $ sudo apt-get install fbi pi@raspberrypi ~ $ wget https://ozzmaker.com/piscreen/image-test.gif pi@raspberrypi ~ $ sudo fbi -noverbose -T 1 -a -d /dev/fb1 image-test.gif
(/boot/config.txt)
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.