NeoGeo games "raster irq enable/disable" at F1 press
-
@andershp fwiw, i tested this in mame2003+ (i don't have mame2003), F1 was indeed mapped to that "toggle raster effects" thingy, and i couldn't find a way to disable this key, so i think it's hardcoded somewhere in mame's code and impossible to remap.
-
@barbudreadmon yes just did some digging on this. Looks like this is our culprit
-
One solution is to use core options and set the input interface to retropad. Using simultaneous or keyboard will allow f1 to be used.
I'll review the code and other instances like it to see if a better solution is available
-
Ok, issue is fixed. Update mame2003 specifying "from source" to get the fix.
-
@mahoneyt944 hmmm i saw your commit, imho you should have turned this into a core option or something, here you are basically dropping support for devices that don't have the specs to run those games with rasters, and i think one of the main reasons for using mame2003 is its friendliness for lower spec devices
-
@barbudreadmon there's no documentation for this feature for any user to know to use it unless they reviewed the source..... Which is very problematic. Similar code throughout the core uses debug for these types of things currently. At some point I'd like to comb through the debug actions and standardize them in a way that's easier but for now..... I just wanted to get it working.
-
@mahoneyt944
Ok I tried but the version of RetroPie that I'm running is 4.3, and it requested me to update to 4.4.
I'm on a Pi 3B+ so I've been reluctant to update everything but tried the Setup Script and now it will not even enter the RetroPie Setup menu... Gives me all sorts of messages like
Err http://mirrordirector.raspbian.org/raspbian/ jesse/main ... 404 not found etc.But every systemupdate begins with fetching the newest RetroPie Setup script, right?
-
@mahoneyt944 @barbudreadmon
By the way, really appreciate you guys digging into this - thanks! -
@andershp you can update emulators without updating everything else. Go into RetroPie setup, Manage packages, manage main packages, find mame2003, update from source. This will take about 25 mins or so.
-
@andershp said in NeoGeo games "raster irq enable/disable" at F1 press:
I'm on a Pi 3B+ so I've been reluctant to update everything but tried the Setup Script and now it will not even enter the RetroPie Setup menu... Gives me all sorts of messages like
Err http://mirrordirector.raspbian.org/raspbian/ jesse/main ... 404 not found etc.But every systemupdate begins with fetching the newest RetroPie Setup script, right?
Your system (Jessie) is wildly out of date. We are two OSes ahead (first Stretch, then Buster. Bullseye is right around the corner, maybe.)
Unfortunately, you cannot update through the setup script. In fact you cannot even update in-situ at all. You need to backup your
roms,bios,configs, andsplashscreensdirs, and install the latest official image from RetroPie.org.uk/download, then you can restore your backed-up directories and you'll be basically right back where you were, but with a current and supported configuration. -
@sleve_mcdichael
Okay, but since I'm not running newest pi hardware, will this result in slowdowns? And I have my setup running very well with Pegasus Frontend and everything.
I can always try and revert back, I guess. -
@andershp said in NeoGeo games "raster irq enable/disable" at F1 press:
will this result in slowdowns?
There is a chance that some emulators will perform differently, not necessarily slower (sometimes we manage making the code lighter), if you change versions. But that shouldn't be a major concern if you are using mame2003, it never went through major emulation improvements, and never will, that's the concept behind those vintaged cores, with mame2003+ as the exception.
Note that you should be wary of the config files compatibility if you jump retroarch versions.
-
@mahoneyt944 said in NeoGeo games "raster irq enable/disable" at F1 press:
@andershp you can update emulators without updating everything else. Go into RetroPie setup, Manage packages, manage main packages, find mame2003, update from source. This will take about 25 mins or so.
Thanks man. This solved the raster issue!
I did notice the game was very slow to start and exit (only the first time I tried it though), as well as a test of another mame game made the pi crash when exiting. Coincidental? -
@andershp can't say for sure without a log or something to go on.
Does it still happen after resetting the pi?
-
@andershp mame compilation can be a demanding process, maybe it left your device in an unstable state if you didn't reboot it afterward ?
-
@barbudreadmon Even after a reboot, the system freezes when trying to exit Gyruss (0.78 mame 2003 rom) - this didn't happen before...
In The Hunt, Burgertime and Donkey Kong all seems to work (just to test a few others). I also tested in EmulationStation to rule out something frontend related, but it also freezes here.Edit: the slowness of opening/closing games was solved by rebooting.
-
@andershp said in NeoGeo games "raster irq enable/disable" at F1 press:
the system freezes when trying to exit Gyruss
I can't seem to reproduce this, so i'm not sure what it could be about. Maybe some file got corrupted or something.
-
Can you post a log?
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.