Scraper

Daddyz

Morning all , I'm doing the f3 test as we speak .....anything in particular to look for ....or is it self explanatory ?

Daddyz

Ok , this is what I got IMG_2741.JPG1.JPG .
All good ?

mitu

Looks like the capacity is ok.

Daddyz

Thanks again mitu , so , what's my next step , get rid of everything and start from scratch , or any other steps I should contemplate...?.
( I did " image " Retropie on anew SD card but when installed in the unit , it gives me a whole bunch of text that I don't understand ).
My thinking is that I have to erase all on the Raspberry Pie before installing the new " image " .?
Thanks for your time

mitu

@daddyz said in Scraper:

My thinking is that I have to erase all on the Raspberry Pie before installing the new " image " .?

There's no need to erase anything, installing the image will automatically erase everything that's on the micro-sdcard - if that's what you're using.

Daddyz

Thanks again , ( yes on the micro card ) will try.....cheers

Clyde

@daddyz said in Scraper:

Ok , this is what I got

All good ?

You seem to have only used f3write, did you? That's only half of the test. Alhough it already shows that the card is writable and has the promised capacity, you'll have to run f3read afterwards to check that the files were actually written correctly. And don't forget to delete them afterwards, because your card doesn't have any free space left as long as they remain! (That only matters if you keep that RetroPie installation, of course.)

edit: I just noticed that my instructions above about f3read were somewhat abivalent. I changed them now, saying clearly that the user has to run f3read after f3write.

Daddyz

Hello all , first I'd like to thank you all for your help on the Sraping issue .
I replaced the SD card and now everything is working .
Thank you for the suggestion.
Now I have another issue , I cannot get to the desktop , had this problem a few months ago but was resolved , the thing is , I cannot remember how it was done .
Does the forum keep archives , perhaps I can look back at the messages and find the answer there to what was suggested to me .
Thanks

mitu

See https://retropie.org.uk/docs/FAQ/#where-did-the-desktop-go on how to install the desktop and start it.

Daddyz

Thank you mitu ....now I remember !!