Development of module-script generator for lr-mess, lr-mame and mame standalone

Folly

Good luck tomorrow, I think we are on the right track now.
With the information from yesterday I updated the script.

So try this update first.

I did some tests with linking directories.
Moving and removing from within linked directories should work.
So you probably have :
/opt/retropie/configs.hdmi/all/retroarch/...... (is the actual folder)
/opt/retropie/configs/all/retroarch/...... (is the linked folder)

You did not have the roms/realistic directory.
When not there it can't move the files.
So I fixed this when selecting "Setup Orionsangels Arcade Overlays Part1 > roms/realistic" it will check if the roms/realistic directory exists.
If not the it will automatically install the Arcade realistic category/folder.

Just press <n> when you see this, it will skip downloading the file again :

getting your desired file
File exists !, do you want to overwrite it ? [Y/N] n

https://github.com/FollyMaddy/RetroPie-Share/commit/268c0e19b0dc974976a15211b8f377a98ca99ee2
https://github.com/FollyMaddy/RetroPie-Share/commit/461719f82c8bedbdbf5e08c2369d278c47b23ab0

DTEAM

@Folly said in Development of module-script generator for lr-mess and mame standalone:

My runcommand.log does not find cfg overides, does yours find some (so it will undo some settings from the overlay cfg) ?:

[INFO] [Overrides]: No core-specific overrides found at "/home/pi/.config/retroarch/config/MAME/MAME.cfg".
[INFO] [Overrides]: No content-dir-specific overrides found at "/home/pi/.config/retroarch/config/MAME/realistic.cfg".
[INFO] [Overrides]: No game-specific overrides found at "/home/pi/.config/retroarch/config/MAME/ 720.cfg".

Nothing on my side. the folder doesn't contain those files.

In my /opt/retropie/configs.hdmi/arcade, my retroarch.cfg contain this :

# Settings made here will only override settings in the global retroarch.cfg if placed above the #include line
input_overlay = "/opt/retropie/configs/all/retroarch/overlay/MAME-Horizontal.cfg"
input_overlay_opacity = "1.000000"

input_remapping_directory = "/opt/retropie/configs/arcade/"

#include "/opt/retropie/configs/all/retroarch.cfg"

The MAME-Horizontal.cfg doesn't exist

Note: For configs.hdmi , it doesn't matter because I have a symbolic link (configs = configs.hdmi ). It should be good.

Folly

@DTEAM said in Development of module-script generator for lr-mess and mame standalone:

Nothing on my side. the folder doesn't contain those files.

Ok, that looks good too then.

In my /opt/retropie/configs.hdmi/arcade, my retroarch.cfg contain this :
# Settings made here will only override settings in the global retroarch.cfg if placed above the #include line
input_overlay = "/opt/retropie/configs/all/retroarch/overlay/MAME-Horizontal.cfg"
input_overlay_opacity = "1.000000"

input_remapping_directory = "/opt/retropie/configs/arcade/"

#include "/opt/retropie/configs/all/retroarch.cfg"
The MAME-Horizontal.cfg doesn't exist

Note: For configs.hdmi , it doesn't matter because I have a symbolic link (configs = configs.hdmi ). It should be good.

Strange, the script part I added, for setting up the realistic overlays, does nothing with that directory.

What's inside that retroarch.cfg will only have effect when you run roms from the arcade folder.
I would suggest you remove the overlay lines in that retroarch.cfg.

Have you tried my updated script ?
I have updated it again to get rid of possible issues with /config.hdmi/ folder
I would like you to run it.
You only have to do this :
CHEATS/ARTWORK/BEZELS > Submenu
Setup Orionsangels Arcade Overlays Part1 > roms/realistic

I hope this is the solution to the problem.

When no .zip.cfg and .7z.cfg files come into the /home/pi/RetroPie/roms/realistic then I would like to see your latest log from /home/pi/RetroPie-Setup/logs.
Just extract the latest, after you tried.
Then we might find the error.
Hopefully it will not be necessary.

https://github.com/FollyMaddy/RetroPie-Share/commit/ab2643eaaff18007e68b6d0213d0d29457cba121

DTEAM

@Folly
It works if I put 720.7z.cfg and 720.zip.cfg directly in

/home/pi/RetroPie/roms/arcade/

It don't recognize /home/pi/RetroPie/roms/realistic

DTEAM

@Folly said in Development of module-script generator for lr-mess and mame standalone:

Have you tried my updated script ?

yes

When no .zip.cfg and .7z.cfg files come into the /home/pi/RetroPie/roms/realistic then I would like to see your latest log from /home/pi/RetroPie-Setup/logs.
Just extract the latest, after you tried.
Then we might find the error.

Parameters: 
Executing: /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-mame2016/mamearcade2016_libretro.so --config /opt/retropie/configs/arcade/retroarch.cfg "/home/pi/RetroPie/roms/arcade/baddudes.7z" --appendconfig /dev/shm/retroarch.cfg
SOURCE FILE: ../../../../../src/mame/drivers/dec0.cpp
PARENT: 0
NAME: baddudes
DESCRIPTION: Bad Dudes vs. Dragonninja (US)
YEAR: 1988
MANUFACTURER: Data East USA
Value  not supported for option netdevprovider - falling back to auto
ei31.9a NO GOOD DUMP KNOWN
WARNING: the machine might not run correctly.
MAIN FIRST
w:256 h:240 a:1.333333
RETRO DEINIT
retro_finish begin
Average speed: 99.43% (3 seconds)
retro exit machine
retro_finish end

Folly

@DTEAM said in Development of module-script generator for lr-mess and mame standalone:

@Folly
It works if I put 720.7z.cfg and 720.zip.cfg directly in

/home/pi/RetroPie/roms/arcade/

It don't recognize /home/pi/RetroPie/roms/realistic

Does the 720.zip.cfg contain this now ? :

input_overlay = "/home/pi/RetroPie/downloads/Orionsangels_Arcade_Overlays_For_Retroarch_Part1/overlay/realistic/720.cfg"

So the viewport is ok and the bezel is loaded now when running from :
/home/pi/RetroPie/roms/arcade/

Folly

@DTEAM said in Development of module-script generator for lr-mess and mame standalone:

lr-mame2016/mamearcade2016_libretro.so

Not the log I was expecting ;-)

JimmyFromTheBay

@DTEAM said in Development of module-script generator for lr-mess and mame standalone:

@Folly
The rom is fine. When I put this rom in the JAKKS folder, it works. I don't know what's going on with my classich folder. Roms with MAME artwork and retroarch overlays (at the same time) do not work. I'll see what I can do. The problem is 100% on my side, not related to the script.

Solved: It was my emulators.cfg file in /opt/retropie/configs/all . It seems it was corrupted. I deleted everything inside. Now it's fine and I'll start to do MAME artworks (MAME format) for classich with @JIMMYFROMTHEBAY bezels if he agrees.

Fine by me :)

Anything I post on these forums is fair game to be used by anyone for anything, no need to ask.

Folly

@JimmyFromTheBay

Can you give the realistic bezels a try ?

Orionsangel

It's fine as long as you give credit and links. I actually welcome it because with what you're doing these bezels can be used by more people.

Folly

@Orionsangel

Added you in the first post.
I saw that some files are missing from part1.
And I would like to have just 1 pack that I can download and generate files from.
Or perhaps better, have all the files separately on a google drive.

Can we discuss that in an other thread ?

DTEAM

@Folly said in Development of module-script generator for lr-mess and mame standalone:

Does the 720.zip.cfg contain this now ? :
input_overlay = "/home/pi/RetroPie/downloads/Orionsangels_Arcade_Overlays_For_Retroarch_Part1/overlay/realistic/720.cfg"

yes

Folly

@DTEAM

So everything works now from the arcade folder.
(apart from bios files not found)
But not from the realistic folder, correct ?

You should check if you have /opt/retropie/config(.hdmi)/realistic containing also the emulators.cfg etc.
And that realistic is found in the es_systems of emulationstation.

DTEAM

@Folly said in Development of module-script generator for lr-mess and mame standalone:

So everything works now from the arcade folder.
But not from the realistic folder, correct ?

Nothing works except if I cut and paste xxxxxxx.zip.cfg directly into the arcade roms folder.

Folly

@DTEAM

What does it do then, when you paste the .zip.cfg inside the arcade folder and run a rom from that folder ?

DTEAM

@Folly said in Development of module-script generator for lr-mess and mame standalone:

What does it do then, when you paste the .zip.cfg inside the arcade folder and run a rom from that folder ?

It loads automatically with the good presets. Everything works fine, but I have to copy everything to Arcade directly

Folly

@DTEAM

OK, That is what I wanted to know.
So it will work, but not from the realistic folder, correct ?

DTEAM

@Folly said in Development of module-script generator for lr-mess and mame standalone:

OK, That is what I wanted to know.
So it will work, but not from the realistic folder, correct ?

Yes

Folly

@DTEAM

So not showing the bezel and not having the correct viewpoint is solved now.

What is left is that you can't run roms from the realistic folder.
Do other folders, like classich or konamih have the same problem ?

DTEAM

@Folly
Why have you create a "realistic" system in es_system.cfg?

@Folly said in Development of module-script generator for lr-mess and mame standalone:

Do other folders, like classich or konamih have the same problem ?

I'm using MAME Artworks for those folders . I need to download bezel's with your script first. I'll do a test.