RetroPie forum home
    • Recent
    • Tags
    • Popular
    • Home
    • Docs
    • Register
    • Login
    Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first

    Controller input mapping works in Emulation Station but not in emulators

    Scheduled Pinned Locked Moved
    Help and Support
    input mapping controller map input config
    3
    23
    4.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mcpat
      last edited by

      I have the same problem with hid-nx, it seems the buttons must be +2 higher,

      autoconfiguration of retroarch N64 controller N64 Controller.cfg:

      input_device = "N64 Controller"
input_driver = "udev"
input_vendor_id = "1406"
input_product_id = "8217"
input_r_y_plus_btn = "8"
input_left_btn = "h0left"
input_left_btn_label = "D-Pad Left"
input_state_slot_decrease_btn = "h0left"
input_r_x_minus_btn = "9"
input_right_btn = "h0right"
input_right_btn_label = "D-Pad Right"
input_state_slot_increase_btn = "h0right"
input_r_btn = "4"
input_save_state_btn = "4"
input_down_btn = "h0down"
input_down_btn_label = "D-Pad Down"
input_r_y_minus_btn = "7"
input_l_btn = "3"
input_load_state_btn = "3"
input_r_x_plus_btn = "10"
input_y_btn = "12"
input_x_btn = "2"
input_menu_toggle_btn = "2"
input_b_btn = "1"
input_b_btn_label = "A"
input_reset_btn = "1"
input_a_btn = "0"
input_up_btn = "h0up"
input_up_btn_label = "D-Pad Up"
input_select_btn = "5"
input_start_btn = "6"
input_exit_emulator_btn = "6"
input_enable_hotkey_btn = "5"

      and the working configuration is:

      input_device = "N64 Controller"
input_driver = "udev"
input_vendor_id = "1406"
input_product_id = "8217"
input_r_y_plus_btn = "10"
input_left_btn = "h0left"
input_left_btn_label = "D-Pad Left"
input_state_slot_decrease_btn = "h0left"
input_r_x_minus_btn = "11"
input_right_btn = "h0right"
input_right_btn_label = "D-Pad Right"
input_state_slot_increase_btn = "h0right"
input_r_btn = "6"
input_save_state_btn = "4"
input_down_btn = "h0down"
input_down_btn_label = "D-Pad Down"
input_r_y_minus_btn = "9"
input_l_btn = "5"
input_load_state_btn = "3"
input_r_x_plus_btn = "12"
input_y_btn = "1"
input_x_btn = "4"
input_menu_toggle_btn = "2"
input_b_btn = "3"
input_b_btn_label = "A"
input_reset_btn = "1"
input_a_btn = "2"
input_up_btn = "h0up"
input_up_btn_label = "D-Pad Up"
input_select_btn = "7"
input_start_btn = "8"
input_exit_emulator_btn = "6"
input_enable_hotkey_btn = "7"

      D-Pad was working, not working where the other buttons (if you compare, they are +2).

      Emulationstation has this es_input.cfg:

      <?xml version="1.0"?>
<inputList>
  <inputAction type="onfinish">
    <command>/opt/retropie/supplementary/emulationstation/scripts/inputconfiguration.sh</command>
  </inputAction>
  <inputConfig type="joystick" deviceName="N64 Controller" deviceGUID="05001c5e7e0500001920000001800000">
    <input name="rightanalogdown" type="button" id="8" value="1"/>
    <input name="left" type="hat" id="0" value="8"/>
    <input name="rightanalogleft" type="button" id="9" value="1"/>
    <input name="right" type="hat" id="0" value="2"/>
    <input name="pagedown" type="button" id="4" value="1"/>
    <input name="down" type="hat" id="0" value="4"/>
    <input name="rightanalogup" type="button" id="7" value="1"/>
    <input name="pageup" type="button" id="3" value="1"/>
    <input name="rightanalogright" type="button" id="10" value="1"/>
    <input name="y" type="button" id="12" value="1"/>
    <input name="x" type="button" id="2" value="1"/>
    <input name="b" type="button" id="1" value="1"/>
    <input name="a" type="button" id="0" value="1"/>
    <input name="up" type="hat" id="0" value="1"/>
    <input name="select" type="button" id="5" value="1"/>
    <input name="start" type="button" id="6" value="1"/>
    <input name="leftanalogright" type="axis" id="0" value="1"/>
    <input name="leftanalogup" type="axis" id="1" value="-1"/>
    <input name="leftanalogdown" type="axis" id="1" value="1"/>
    <input name="leftanalogleft" type="axis" id="0" value="-1"/>
  </inputConfig>
  <inputConfig type="keyboard" deviceName="Keyboard" deviceGUID="-1">
    <input name="left" type="key" id="1073741904" value="1"/>
    <input name="right" type="key" id="1073741903" value="1"/>
    <input name="down" type="key" id="1073741905" value="1"/>
    <input name="y" type="key" id="118" value="1"/>
    <input name="x" type="key" id="99" value="1"/>
    <input name="b" type="key" id="120" value="1"/>
    <input name="a" type="key" id="122" value="1"/>
    <input name="up" type="key" id="1073741906" value="1"/>
    <input name="select" type="key" id="97" value="1"/>
    <input name="start" type="key" id="115" value="1"/>
  </inputConfig>
</inputList>

      Can you tell me the reason? Is something corrupted after changing from dkms-hid-nintendo to hid-nx

      mituM 1 Reply Last reply Reply Quote 0
      • mituM
        mitu Global Moderator @mcpat
        last edited by mitu

        @mcpat said in Controller input mapping works in Emulation Station but not in emulators:

        Emulationstation has this es_input.cfg:
        [..]

        EmulationStation's config is consistent with the (wrong ?) auto-profile, so whatever SDL reports as button numbers it's added to the profile, nothing to do here.

        Can you tell me the reason? Is something corrupted after changing from dkms-hid-nintendo to hid-nx

        Did you re-configure your controller after changing the kernel module ? What does jstest reports as button numbers - is it consistent with the wrong configuration or not ? Please add some more info about your setup.

        M 1 Reply Last reply Reply Quote 0
        • M
          mcpat @mitu
          last edited by

          @mitu

          Yes the config should be consistent with the "wrong" auto-profile.

          And yes, I complete re-configure (means deleting all configs, unpair and repair, start from the beginning).

          jstest I can try today evening. My setup is a rpi zero 2w (~rpi3), with latest retropie. I suppose the reason are the buttons BTN_0 and BTN_1 from hid-nx if you look there and there. But I could also be wrong. As said, acc. this everything works. Except:

          1. N64 controller the LEDs never stop to rotate even after connecting
          2. Megadrive controller is not working

          So I switched to hid-nx, which is working except the autoconfig.

          mituM 1 Reply Last reply Reply Quote 0
          • mituM
            mitu Global Moderator @mcpat
            last edited by

            And yes, I complete re-configure (means deleting all configs, unpair and repair, start from the beginning).

            There's no need to delete anything. Please don't do so in the future.

            jstest I can try today evening. My setup is a rpi zero 2w (~rpi3), with latest retropie. I suppose the reason are the buttons BTN_0 and BTN_1 from hid-nx if you look there and there. But I could also be wrong. As said, acc. this everything works. Except:

            OK, let's see what it outputs. You can also try evtest (is not installed by default) and see if it reports different input values.

            Btw, you shouldn't have opened a Github issue until this issue is cleared here - whether it's a SDL or other component that's generating the wrong inputs. Do note that RetroPie's image has Linux kernel 5.10, while hid-nx is tested with 5.16 and above.

            M 1 Reply Last reply Reply Quote 0
            • M
              mcpat @mitu
              last edited by

              @mitu
              Maybe it's simpler to start with the MD Controller (hier also +2) but has less buttons.
              es_input.cfg

                <inputConfig type="joystick" deviceName="MD/Gen Control Pad" deviceGUID="0500bfc17e0500001720000001800000">
    <input name="left" type="hat" id="0" value="8"/>
    <input name="right" type="hat" id="0" value="2"/>
    <input name="down" type="hat" id="0" value="4"/>
    <input name="x" type="button" id="2" value="1"/>
    <input name="b" type="button" id="1" value="1"/>
    <input name="a" type="button" id="0" value="1"/>
    <input name="up" type="hat" id="0" value="1"/>
    <input name="select" type="button" id="3" value="1"/>
    <input name="start" type="button" id="4" value="1"/>
  </inputConfig>

              MDGen Control Pad.cfg.orig

              input_device = "MD/Gen Control Pad"
input_driver = "udev"
input_vendor_id = "1406"
input_product_id = "8215"
input_left_btn = "h0left"
input_left_btn_label = "D-Pad Left"
input_state_slot_decrease_btn = "h0left"
input_right_btn = "h0right"
input_right_btn_label = "D-Pad Right"
input_state_slot_increase_btn = "h0right"
input_down_btn = "h0down"
input_down_btn_label = "D-Pad Down"
input_x_btn = "2"
input_menu_toggle_btn = "2"
input_b_btn = "1"
input_reset_btn = "1"
input_a_btn = "0"
input_up_btn = "h0up"
input_up_btn_label = "D-Pad Up"
input_select_btn = "3"
input_start_btn = "4"
input_exit_emulator_btn = "4"
input_enable_hotkey_btn = "3"

              MDGen Control Pad.cfg.patch

              input_device = "MD/Gen Control Pad"
input_driver = "udev"
input_vendor_id = "1406"
input_product_id = "8215"
input_left_btn = "h0left"
input_left_btn_label = "D-Pad Left"
input_state_slot_decrease_btn = "h0left"
input_right_btn = "h0right"
input_right_btn_label = "D-Pad Right"
input_state_slot_increase_btn = "h0right"
input_down_btn = "h0down"
input_down_btn_label = "D-Pad Down"
input_x_btn = "4"
input_menu_toggle_btn = "2"
input_b_btn = "3"
input_reset_btn = "1"
input_a_btn = "2"
input_up_btn = "h0up"
input_up_btn_label = "D-Pad Up"
input_select_btn = "5"
input_start_btn = "6"
input_exit_emulator_btn = "6"
input_enable_hotkey_btn = "5"

              evtest

              root@rpizerosm:~# evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0:      SEMICO USB Keyboard
/dev/input/event1:      SEMICO USB Keyboard Consumer Control
/dev/input/event2:      SEMICO USB Keyboard System Control
/dev/input/event3:      Rotary Encoder Volume
/dev/input/event4:      N64 Controller
/dev/input/event5:      MD/Gen Control Pad
Select the device event number [0-5]: 5
Input driver version is 1.0.1
Input device ID: bus 0x5 vendor 0x57e product 0x2017 version 0x8001
Input device name: "MD/Gen Control Pad"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 256 (BTN_0)
    Event code 257 (BTN_1)
    Event code 304 (BTN_SOUTH)
    Event code 305 (BTN_EAST)
    Event code 308 (BTN_WEST)
    Event code 314 (BTN_SELECT)
    Event code 315 (BTN_START)
  Event type 3 (EV_ABS)
    Event code 16 (ABS_HAT0X)
      Value      0
      Min       -1
      Max        1
    Event code 17 (ABS_HAT0Y)
      Value      0
      Min       -1
      Max        1
Properties:
Testing ... (interrupt to exit)
/* up */
Event: time 1695273947.923814, type 3 (EV_ABS), code 17 (ABS_HAT0Y), value -1
Event: time 1695273947.923814, -------------- SYN_REPORT ------------
Event: time 1695273948.088852, type 3 (EV_ABS), code 17 (ABS_HAT0Y), value 0
/* down */
Event: time 1695273948.088852, -------------- SYN_REPORT ------------
Event: time 1695273949.288930, type 3 (EV_ABS), code 17 (ABS_HAT0Y), value 1
Event: time 1695273949.288930, -------------- SYN_REPORT ------------
Event: time 1695273949.453942, type 3 (EV_ABS), code 17 (ABS_HAT0Y), value 0
/* left */
Event: time 1695273949.453942, -------------- SYN_REPORT ------------
Event: time 1695273949.903987, type 3 (EV_ABS), code 16 (ABS_HAT0X), value -1
Event: time 1695273949.903987, -------------- SYN_REPORT ------------
Event: time 1695273950.084017, type 3 (EV_ABS), code 16 (ABS_HAT0X), value 0
/* right */
Event: time 1695273950.084017, -------------- SYN_REPORT ------------
Event: time 1695273950.534079, type 3 (EV_ABS), code 16 (ABS_HAT0X), value 1
Event: time 1695273950.534079, -------------- SYN_REPORT ------------
Event: time 1695273950.684056, type 3 (EV_ABS), code 16 (ABS_HAT0X), value 0
/* A */
Event: time 1695273950.684056, -------------- SYN_REPORT ------------
Event: time 1695273953.804411, type 1 (EV_KEY), code 304 (BTN_SOUTH), value 1
Event: time 1695273953.804411, -------------- SYN_REPORT ------------
Event: time 1695273953.939392, type 1 (EV_KEY), code 304 (BTN_SOUTH), value 0
/* B */
Event: time 1695273953.939392, -------------- SYN_REPORT ------------
Event: time 1695273954.614390, type 1 (EV_KEY), code 305 (BTN_EAST), value 1
Event: time 1695273954.614390, -------------- SYN_REPORT ------------
Event: time 1695273954.749388, type 1 (EV_KEY), code 305 (BTN_EAST), value 0
/* C */
Event: time 1695273954.749388, -------------- SYN_REPORT ------------
Event: time 1695273955.529501, type 1 (EV_KEY), code 308 (BTN_WEST), value 1
Event: time 1695273955.529501, -------------- SYN_REPORT ------------
Event: time 1695273955.649511, type 1 (EV_KEY), code 308 (BTN_WEST), value 0
/* Select */
Event: time 1695273955.649511, -------------- SYN_REPORT ------------
Event: time 1695273960.824956, type 1 (EV_KEY), code 314 (BTN_SELECT), value 1
Event: time 1695273960.824956, -------------- SYN_REPORT ------------
Event: time 1695273961.004932, type 1 (EV_KEY), code 314 (BTN_SELECT), value 0
/* Start */
Event: time 1695273961.004932, -------------- SYN_REPORT ------------
Event: time 1695273962.400159, type 1 (EV_KEY), code 315 (BTN_START), value 1
Event: time 1695273962.400159, -------------- SYN_REPORT ------------
Event: time 1695273962.520149, type 1 (EV_KEY), code 315 (BTN_START), value 0
Event: time 1695273962.520149, -------------- SYN_REPORT ------------
^Croot@rpizerosm:~#

              How should I use jstest? Which parameters? I only saw two buttons...

              Thx for your help!

              M mituM 2 Replies Last reply Reply Quote 0
              • M
                mcpat @mcpat
                last edited by

                PS: please note acc. hid-nx I use udev rules

                99-joycond-ignore.rules

                # ignore Switch Pro controller by overriding tags
ACTION=="add", SUBSYSTEM=="input", ATTRS{id/vendor}=="057e", ATTRS{id/product}=="2009", TAG="uaccess"
ACTION=="add", SUBSYSTEM=="input", ATTRS{id/vendor}=="057e", ATTRS{id/product}=="2009", TAG+="seat"

# ignore NSO SNES controller by overriding tags
ACTION=="add", SUBSYSTEM=="input", ATTRS{id/vendor}=="057e", ATTRS{id/product}=="2017", TAG="uaccess"
ACTION=="add", SUBSYSTEM=="input", ATTRS{id/vendor}=="057e", ATTRS{id/product}=="2017", TAG+="seat"

# ignore NSO N64 controller by overriding tags
ACTION=="add", SUBSYSTEM=="input", ATTRS{id/vendor}=="057e", ATTRS{id/product}=="2019", TAG="uaccess"
ACTION=="add", SUBSYSTEM=="input", ATTRS{id/vendor}=="057e", ATTRS{id/product}=="2019", TAG+="seat"

# ignore NSO Genesis controller by overriding tags
ACTION=="add", SUBSYSTEM=="input", ATTRS{id/vendor}=="057e", ATTRS{id/product}=="201e", TAG="uaccess"
ACTION=="add", SUBSYSTEM=="input", ATTRS{id/vendor}=="057e", ATTRS{id/product}=="201e", TAG+="seat"

# ignore NES Joy-Con by overriding tags
ACTION=="add", SUBSYSTEM=="input", ATTRS{name}=="NES Controller*", TAG="uaccess"
ACTION=="add", SUBSYSTEM=="input", ATTRS{name}=="NES Controller*", TAG+="seat"
                1 Reply Last reply Reply Quote 0
                • mituM
                  mitu Global Moderator @mcpat
                  last edited by

                  @mcpat said in Controller input mapping works in Emulation Station but not in emulators:

                  How should I use jstest? Which parameters? I only saw two buttons...

                  The idea is to run the test and compare the value of the input ID reported by the test utility with the value recorded by EmulationStation - you need to do this locally, since I can't infer from the output which button you chose.

                  jstest can be run with

                  jstest /dev/input/js0

                  This will test the 1st detected joystick, if you need to test the 2nd one you increment the jsX part (i.e. /dev/input/js1).

                  M 1 Reply Last reply Reply Quote 0
                  • M
                    mcpat @mitu
                    last edited by

                    @mitu

                    root@rpizerosm:/opt/RetroPie-Setup# jstest /dev/input/js0
Driver version is 2.1.0.
Joystick (N64 Controller) has 4 axes (X, Y, Hat0X, Hat0Y)
and 13 buttons (BtnA, BtnB, BtnZ, BtnTL, BtnTR, BtnTR2, BtnStart, (null), (null), (null), (null), Btn0, Btn1).
Testing ... (interrupt to exit)
Axes:  0:     0  1: -2234  2:     0  3:     0 Buttons:  0:off  1:off  2:off  3:off  4:off  5:off  6:off  7:off  8:off  9:off 10:off 11:off 12:off

                    Buttons are:

                    0 = A
1 = B
2 = Z (Below in the middle)
3= TL
4 = TR
5 = ZR (right button on the back site)
6 = Start
7 = Yellow up
8 = Yellow down
9 = Yellow left
10 = Yellow right
11 = "Power" (right round button on the back site)
12 = "Square Button" on the left back site
                    mituM 1 Reply Last reply Reply Quote 0
                    • mituM
                      mitu Global Moderator @mcpat
                      last edited by

                      @mcpat Looking at the jstest output, it seems to coincide with what ES input condfiguration recorded - A is 0, B is 1, X is 2, etc.
                      Now in Linux there are 2 APIs for joystick - a 'legacy' one and one based on evdev. jstest uses the 'legacy' API and enumerates the buttons starting from 0, while the evdev one seems to start with 2, though it still advertises BTN_0 and BTN_1.
                      SDL (which is used by ES for input processing/mapping) is supposed to use the evdev interface (but can fallback to the 'legacy' one) and so is RetroArch, but somehow the button numbering in SDL starts from 0 (?) instead of 2, as reported by evdev. I'm not sure whether it's a SDL bug (assuming buttons always start from 0) or maybe the Linux driver doesn't implement the 'legacy' joystick API (unlikely though).

                      M 2 Replies Last reply Reply Quote 0
                      • M
                        mcpat @mitu
                        last edited by

                        @mitu
                        thank you for the feedback.

                        So how can we/I solve the problem? I tried to patch in the meantime hid-nx, joycond, ... but no success. If you can give me a hint where to look (e.g. SDL, emulationstation, retroarch, ...) I can try to find the button numbering.

                        Thank you again!

                        1 Reply Last reply Reply Quote 0
                        • M
                          mcpat @mitu
                          last edited by

                          @mitu
                          Is it this line?

                          Really interested in patching ;)

                          mituM 1 Reply Last reply Reply Quote 0
                          • mituM
                            mitu Global Moderator @mcpat
                            last edited by

                            @mcpat said in Controller input mapping works in Emulation Station but not in emulators:

                            Is it this line?

                            No, EmulationStation doesn't use the gamecontroller subsystem, but the joystick subsystem. Regardless, the gamecontroller mapping doesn't change the button numbering, it's just a mapping.

                            M 1 Reply Last reply Reply Quote 0
                            • M
                              mcpat @mitu
                              last edited by

                              @mitu
                              so how can I solve the problem to be able to use autoconfig?
                              Where can I force "legacy" for ES? Or how can I force to do the autoconfig with the numbering from evdev?
                              Now it's a pain to open a ssh connection and do the correction by hand.

                              Thank you for your patience!

                              1 Reply Last reply Reply Quote 0
                              • mituM
                                mitu Global Moderator
                                last edited by

                                Didn't you already corrected the configuration profile ? It should be enough, the profile is written only when you change the input configuration in EmulationStation, so it's not going to be changed unless you re-configure your controller(s).

                                M 1 Reply Last reply Reply Quote 0
                                • M
                                  mcpat @mitu
                                  last edited by

                                  @mitu
                                  yes it's solved by now, but I am interested in how to solve it for the future and what is causing this +2 shift. If you are not willing to further support, I fully unterstand. It's more my personal interest to find and solve the bug so others don't have this problems.
                                  I was googling a while to find it out, even I am not a beginner (in linux).

                                  mituM 1 Reply Last reply Reply Quote 0
                                  • mituM
                                    mitu Global Moderator @mcpat
                                    last edited by

                                    @mcpat said in Controller input mapping works in Emulation Station but not in emulators:

                                    If you are not willing to further support, I fully unterstand.

                                    I would if I could :).

                                    M 1 Reply Last reply Reply Quote 0
                                    • M
                                      mcpat @mitu
                                      last edited by mcpat

                                      @mitu
                                      I solved the problem. It was in the source code of hid-nx....

                                      see here. It was the BTN_0 and BTN_1

                                      I modified the code like this for both controllers and they are now working correctly!

                                      Can be found starting here

                                      static const struct nx_con_button_mapping gencon_button_mappings[] = {
	{ BTN_SOUTH,	NX_CON_BTN_A,		},
	{ BTN_EAST,	NX_CON_BTN_B,		},
	{ BTN_WEST,	NX_CON_BTN_R,		},
	{ BTN_DPAD_LEFT,	NX_CON_BTN_X,		},
	{ BTN_DPAD_UP,		NX_CON_BTN_Y,		},
	{ BTN_DPAD_RIGHT,	NX_CON_BTN_L,		},
	{ BTN_THUMBL,	NX_CON_BTN_ZR,		},
	{ BTN_START,	NX_CON_BTN_PLUS,	},
	{ BTN_SELECT,	NX_CON_BTN_HOME,	},
	{ BTN_MODE,	NX_CON_BTN_CAP,		},
	{ /* sentinel */ },
};

/*
 * N64's C buttons get assigned to d-pad directions and registered as buttons.
 */
static const struct nx_con_button_mapping n64con_button_mappings[] = {
	{ BTN_A,		NX_CON_BTN_A,		},
	{ BTN_B,		NX_CON_BTN_B,		},
	{ BTN_Z,		NX_CON_BTN_ZL,		},
	{ BTN_TL,		NX_CON_BTN_L,		},
	{ BTN_TR,		NX_CON_BTN_R,		},
	{ BTN_TR2,		NX_CON_BTN_LSTICK,	},
	{ BTN_START,		NX_CON_BTN_PLUS,	},
	{ BTN_DPAD_UP,		NX_CON_BTN_Y,		},
	{ BTN_DPAD_DOWN,	NX_CON_BTN_ZR,		},
	{ BTN_DPAD_LEFT,	NX_CON_BTN_X,		},
	{ BTN_DPAD_RIGHT,	NX_CON_BTN_MINUS,	},
	{ BTN_THUMBL,		NX_CON_BTN_HOME,	},
	{ BTN_MODE,		NX_CON_BTN_CAP,		},
	{ /* sentinel */ },
};
                                      1 Reply Last reply Reply Quote 0
                                      • First post
                                        Last post

                                      Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.

                                      Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.