Coleco Mapping Arcade Machine-Cool CV Mapping
-
I havent updated my arcade in a while and want to adjust Coleco settings in Cool CV mapping. I see setups here with PS controllers, but where do I check what my setup is in retropie? I need to know what buttons are what numbers so I can configure the COOL CV notepad file? Here is my setup from fidgeting and it isnt working. I had it working at some point but must have overwritten the file. Any help would be appreciated. Thanks. The settings below probably represent numbers I may not even have as I replicated another thread on here. Just need to see what the actual numbers are so I can adjust.
' CoolCV mappings for Colecovision controllers to keyboard and joystick
fullscreen no
joystick_1_vert joy0 axis1
joystick_1_horiz joy0 axis0
joystick_2_vert joy1 axis1
joystick_2_horiz joy1 axis0
up_1 key0 joy0_4
right_1 key0 joy0_5
down_1 key0 joy0_6
left_1 key0 joy0_7
left_button_1 key0 joy0_0
right_button_1 key0 joy0_3
button3_1 key0 joy0_8
button4_1 key0 joy0_9
key1_1 key0 joy0_15
key2_1 key0 joy0_13
key3_1 key0 joy0_12
key4_1 key0 joy0_11
key5_1 key0 joy0_10
key6_1 key0 joy0_14 -
Have a look at the official Retropie docs :: https://retropie.org.uk/docs/RetroArch-Configuration/
and your configs should be saved to /opt/retropie/configs/all/retroarch/autoconfig
-
@BAZLOCO thanks. I did this years ago and the notepad file must have been overwritten. I will run the test then later the file w mappings. Appreciate it. Once done I will take a stab at altering intellivision. Much appreciated.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.