Raspberry Pi 5 - official announcement

[retropieuser555]

Thanks for adding the change to the mupen64plus standalone script. That's now building and loading for me successfully.

Testing the standalone mupen64plus I've found I can run games like Majora's Mask, Snowboard Kids, Super Mario 64 at 4x native resolution, so it looks quite nice and higher than the retroarch core is able to handle

[TPR]

Having an issue installing lr-mame2016 from the setup script. Everything is updated.

= = = = = = = = = = = = = = = = = = = = =
Building 'lr-mame2016' : MAME emulator - MAME 0.174 port for libretro
= = = = = = = = = = = = = = = = = = = = =

Removing additional swap
make REGENIE=1 VERBOSE=1 NOWERROR=1 OSD="retro" PYTHON_EXECUTABLE=python2 CONFIG=libretro LIBRETRO_OS="unix" ARCH="" LIBRETRO_CPU="aarch64" clean
make[1]: Entering directory '/home/pi/RetroPie-Setup/tmp/build/lr-mame2016'
GCC 12 detected
makefile:876: *** Python is not available in path. Stop.
make[1]: Leaving directory '/home/pi/RetroPie-Setup/tmp/build/lr-mame2016'
make: *** [Makefile.libretro:200: clean] Error 2
make REGENIE=1 VERBOSE=1 NOWERROR=1 OSD="retro" PYTHON_EXECUTABLE=python2 CONFIG=libretro PTR64=1 LIBRETRO_OS="unix" ARCH="" LIBRETRO_CPU="aarch64" TARGET=mame SUBTARGET=arcade
make[1]: Entering directory '/home/pi/RetroPie-Setup/tmp/build/lr-mame2016'
GCC 12 detected
makefile:876: *** Python is not available in path. Stop.
make[1]: Leaving directory '/home/pi/RetroPie-Setup/tmp/build/lr-mame2016'
make: *** [Makefile.libretro:197: build] Error 2
Removing additional swap
Could not successfully build lr-mame2016 - MAME emulator - MAME 0.174 port for libretro (/home/pi/RetroPie-Setup/tmp/build/lr-mame2016/mamearcade2016_libretro.so not found).
/home/pi

Log ended at: Wed May 1 12:10:27 AM EDT 2024
Total running time: 0 hours, 0 mins, 22 secs

[TPR]

Well, I at least got past the error by installing Python2.7 from these instructions:
https://unix.stackexchange.com/questions/768546/how-to-install-python2-7-dev-package-on-vanilla-debian-12

[mitu]

@TPR said in Raspberry Pi 5 - official announcement:

..
Having an issue installing lr-mame2016 from the setup script..

On a Pi5 ? Please specify the exact version/commit of the RetroPie-Setup script and not the generic everything is updated/latest version.

[TPR]

@mitu Sorry will do once it's done updating from source and I can get back to retropie-setup. But I had just done a full update of everything from the retropie-setup right before this. It is installing lr-mame2016 now:

[mitu]

I can reproduce it, though it's not Pi5 specific. It will be fixed, though not with the modification you added. If you're using Pi5 now, why not install lr-mame or straight up mame, instead of the older version ?

[TPR]

@mitu fair question. Just porting over my pi 4 build and will probably make those changes once everything is up and running.

If you can reproduce it, what is the fix?

[mitu]

@TPR said in Raspberry Pi 5 - official announcement:

If you can reproduce it, what is the fix?

https://github.com/RetroPie/RetroPie-Setup/pull/3914

[TPR]

@mitu You rock!

[TPR]

@mitu I can confirm the fix worked and lr-mame2016 installs and runs. Thank you again!

[TPR]

Getting the following error trying to install Yabasanshiro...

[retropieuser555]

@TPR doesn't solve that emulator but lr-beetle-saturn works very well on the pi 5 for me

[TPR]

@retropieuser555 I have it installed but I found some games to have stuttering running that core on the Pi 5 where as with the stand-alone YabaSanshiro on the Pi 4 there were some games that played very smoothly. For example, Die Hard Arcade has some lag with Beetle-Saturn but plays really smooth with YabaShanshiro.

[TPR]

Is there a bookworm equivalent of jstest? I'm trying to set up Hypseus and the previous button number assignments no longer seem to work. I can't figure out what the equivalent for select & start would be in this:
[KEYBOARD]
KEY_UP = 273 114 14
KEY_DOWN = 274 102 15
KEY_LEFT = 276 100 16
KEY_RIGHT = 275 103 17
KEY_BUTTON1 = 306 97 2
KEY_BUTTON2 = 308 115 1
KEY_BUTTON3 = 32 113 4
KEY_START1 = 49 0 10
KEY_START2 = 50 0 11
KEY_COIN1 = 53 0 9
KEY_COIN2 = 54 0 7
KEY_SKILL1 = 304 119 3
KEY_SKILL2 = 122 105 6
KEY_SKILL3 = 120 107 8
KEY_SERVICE = 57 0 0
KEY_TEST = 283 0 0
KEY_RESET = 284 0 0
KEY_SCREENSHOT = 293 0 0
KEY_QUIT = 27 113 0 0
END

[mitu]

Is there a bookworm equivalent of jstest?

Yes, it's the same - jstest. If you have an issue that manifests only under Bookworm, I suggest opening a separate topic. Bookworm support, just like the Pi5, is still in beta.

[TPR]

@mitu Looks like I got it working! Thank you!

[mitu]

@TPR said in Raspberry Pi 5 - official announcement:

Getting the following error trying to install Yabasanshiro.

That's a generic installation error and doesn't exactly show what's wrong. A build log would be better, but it's not needed since I could reproduce it. As a rule of thumb, posting this kind of pictures doesn't help - they just show a generic installation error without context or the actual error message, so please don't post them. If you wish to add some info, get the actual log file from $HOME/RetroPie-Setup/logs and post the error message shown during the build.

In this case, yabasanshiro has issues with 64bit ARM, it needs to be fixed or maybe disabled for this arch.

[TPR]

@mitu Thank you for the update!

[abj]

Did you try with lr-yabause ?

Maybe lr-yabashansiro can fill the gap, it's running on a 64 bit system, but it doesn't work for now.

[TPR]

@abj said in Raspberry Pi 5 - official announcement:

Did you try with lr-yabause ?

Maybe lr-yabashansiro can fill the gap, it's running on a 64 bit system, but it doesn't work for now.

lr-yabause seems to have a lot more games that crash after the Saturn logo screen. I added the scriptmodule for lr-yabashanshiro but it comes up as red in the retropie-setup-script since it's flagged for Pi4.

Is there a way to change the scriptmodule to force it to install on the Pi 5?