Raspberry Pi 5 - official announcement

DTEAM

@sugarfree said in Raspberry Pi 5 - official announcement:

@DTEAM It supports it. Just set the video driver in RetroArch to Vulkan

I don't have Vulkan as an option in RetroArch Drivers-> Video . I only see (gl, sdl2 and glcore)

sugarfree

@DTEAM Yes, in the current state of development, you have to manually add the green lines from this commit to enable Vulkan:
https://github.com/RetroPie/RetroPie-Setup/pull/3785/commits/1b98fb55250bb02ac55f47288d1fb84990a93bc5. After that reinstall RetroArch .

DTEAM

@sugarfree

PPSSPP works for me with your advises and this command line in emulators.cfg

ppsspp_test = "XINIT-WM: /opt/retropie/emulators/ppsspp; /opt/retropie/emulators/ppsspp/PPSSPPSDL --fullscreen %ROM%; popd"

For NAOMI, Atomiswave and Dreamcast it doesn't work (won't load), but now I see the Vulkan option in the RetroArch driver selection.
Should I select something else in the RetroArch GUI or it's something to add in the command line?

sugarfree

@DTEAM Try reinstalling lr-flycast-dev and test with this emulator again.

Good news that we can run standalone PPSSPP under Vulkan. Performance is better than with Libretro. I hope this solution will be permanent because Vulkan provides a great boost to PSP games.

DTEAM

@sugarfree said in Raspberry Pi 5 - official announcement:

@DTEAM Try reinstalling lr-flycast-dev and test with this emulator again.

Thanks, now it works!!! Big difference in performance

I don't know for standalone MAME if anything is feasible for Vulkan. Will see

retropieuser555

@DTEAM said in Raspberry Pi 5 - official announcement:

@sugarfree

PPSSPP works for me with your advises and this command line in emulators.cfg
ppsspp_test = "XINIT-WM: /opt/retropie/emulators/ppsspp; /opt/retropie/emulators/ppsspp/PPSSPPSDL --fullscreen %ROM%; popd"
For NAOMI, Atomiswave and Dreamcast it doesn't work (won't load), but now I see the Vulkan option in the RetroArch driver selection.
Should I select something else in the RetroArch GUI or it's something to add in the command line?

This is a great shout, it always bugged me that ppsspp wasn't working in vulkan simply due to a longstanding bug. It's good this windowing function gets around that. God of War for example plays at 60fps in vulkan without needing to turn on frameskipping.

In OpenGL it's stuck around the 45-50fps

sirhenrythe5th

Good Morning Friends,

yesterday i started to do the manual installation for the first time by using the linked tutorial.
Everything went good so far, i also followed the recommendation to add "kernel=kernel8.img" to the config.txt of the boot folder.

Only issue i have...my Raspberry Pi5 does not show up in my Wifi-Devices List :/
To understand: i dont use a PC / SSH to add files to my Pi, i use my smartphone via WIFI and a File-Commander.
I never had this issue with the Pis 1-4, so i think i forgot something which is enabled by default in the official images.
Is there any option to be activated to make the Pi visible in the connected WIFI-Device-List?

Thanks in advance and have a great day!

pjft

@sirhenrythe5th Well, I cannot really speak for the exact use case you're going for - I'd search for broadcast settings online - but have you checked if you can connect to SSH via the IP? Meaning, getting a SSH client and trying to connect? I seem to recall that SSH comes turned off by default in more recent Rapsberry OS releases, so it'll be a good first step to check whether it's active but undiscoverable, or whether it's not discoverable because it's inactive.

Just a thought.

mitu

@sirhenrythe5th said in Raspberry Pi 5 - official announcement:

Only issue i have...my Raspberry Pi5 does not show up in my Wifi-Devices List :/

Install and enable the Samba shares module.

pjft

Or just follow @mitu 's more informed advice :)

sirhenrythe5th

@mitu i´ll do!
Thank you very much!
This is why i love this project so much, keep learning a lot, doing things with my favorite hobby (emulation) and if i got a problem...just ask mitu / the communnity ^^

Much appreciated, have a nice weekend folks!

IsabelleXL

So I finally got a Pi 5…. Only to find that retropie isn’t ready yet. Checked out batocera but it’s still in beta too. So I think I’ll wait patiently for retropie as I did with the rpi 4. Godspeed all you devs! And thanks for all the work that you do the wait is always worth it

sirhenrythe5th

Folks, i managed the manual installation and am pretty astonished that it went that well ;)
Everything works fine, i just got one little issue and wanted to ask here if anyone has similar experiences.

First of all my system:

Raspberry 5 (4GB), genuine Powersupply
installed Retropie 4.4.8. on top of Bookworm 64-Bit Lite
no changes but added "kernel=kernel8.img" to the config.txt of the "BOOT"-Folder

The issue i have is a well known one...but i dont know the context with this new OS:

"lvl0: VolumeControl::init() - Failed to find mixer elements"

I did not change anything on the sound-options, Devices are set on their default values "SYSTEM" & "HDMI".

What is new on my setup: for the first time i am using Videos in the gamlists scraped by "skyscraper".
And these are the only items, that are affected by this message.
Click-Sound in ES and InGame-Music do play always, just the Videos stay silent...sometimes.
And this makes it even harder to find out what the problem is, sometimes the Videos play with sound, sometimes they don´t and the error-message appears in the terminal.

I tried to search in the forums, but the majority of mixer-errors were pointed to older ALSA-errors as far as i see, and ALSA is no choosable option anymore.

Has anyone an idea where i can start to search for a solution? ^^

Thanks and a good start in this week!

pjft

@IsabelleXL Just curious, is there something preventing you from following the manual install instructions? For what it's worth, I've installed mine manually from day 1 and have been running it without issues since. Folks here are happy to help as well. If you have a Pi5 and would like to run RetroPie on it, I think there's no better time to start than now!

pjft

@sirhenrythe5th Unless you really care about theme sounds, disable the theme navigation sounds.
Otherwise, install pipewire, wireplumber and pipewire-alsa, though that brought other annoyances with it for me - I was unable to change the audio volume from within ES in my case, so I ended up uninstalling them.

Still, worth a shot if you want to have it all running. Always backup your SD card just in case :)

sudo apt install pipewire wireplumber pipewire-alsa

sirhenrythe5th

@pjft thank you Dude!
i dont need the navigations-sounds, i will deactivate them and try again!
Good point, i also had the idea that the navigation-sounds get in conflict with the video sounds.
I remember back in the days of my Pi2 when the navigation-sounds disabled samples of MAME-games using AdvanceMame1.3...this could be the solution indeed!

Thank you once again, great hint!

pjft

@sirhenrythe5th Well, not sure if it's the same thing, but I do recall getting those errors a while back and chatting with @mitu about them, and this being the conclusion we got to.

IsabelleXL

@pjft nothing preventing me but I’d rather just wait for the official image to come out

pjft

@IsabelleXL Got it.

sirhenrythe5th

@pjft said in Raspberry Pi 5 - official announcement:

@sirhenrythe5th Well, not sure if it's the same thing, but I do recall getting those errors a while back and chatting with @mitu about them, and this being the conclusion we got to.

Just to confirm: deactivating the navigation-sound did the trick!
Thanks for this great advise ^^

EDIT: just for interest -> if you disable the navigation sounds, the music you have chosen to be played during the slideshow-screensaver will be disabled too.