retropie with raspberry pi5 + vga666 for crt tv

[kaneda]

Hi I have a raspberry pi5 with vga666, I installed retropie through this guide
https://retropie.org.uk/docs/Manual-Installation/

I want to use it on a pal crt tv
i added this to config.txt
dtoverlay=vc4-kms-dpi-generic
dtparam=clock-frequency=13500000
dtparam=hactive=640,hfp=52,hsync=64,hbp=108
dtparam=vactive=240,vfp=26,vsync=3,vbp=43
dtparam=hsync-invert,vsync-invert
(i asked for help on raspberrypi forum)

i can use Pi OS
but if i launch retropie i get a black screen
can you help me

[mitu]

RetroPie support for the Pi5 is still pending, so some things might not work.

but if i launch retropie i get a black screen

There's no 'retropie' application, what exactly are you launching ? Are you using the RaspiOS Lite and starting EmulationStation from the command line ?

[kaneda]

@mitu said in retropie with raspberry pi5 + vga666 for crt tv:

RetroPie support for the Pi5 is still pending, so some things might not work.

but if i launch retropie i get a black screen

There's no 'retropie' application, what exactly are you launching ? Are you using the RaspiOS Lite and starting EmulationStation from the command line ?

yes i launch EmulationStation

[DeMoN3]

Hi guys,
I'm not sure that writing on this "old" post is correct, but my situation is similiar (Pi5 + VGA666 + CRT) and the config.txt too (I report my all config.txt at the end).

I installed Retropie starting from RaspiOS Lite, and put emulationstation on the autostart, so when I switch on my Pi5 it starts automatically...and it works, I can see it and I can launch games. All works. Terminal, games and retropie applications views very well definited.

But I've a problem: ES' interface (the system menu, the one that appears when you press start) is blurry and quite unreadable. I tried to change theme, now I'm using pixel-tft, but it didn't got better.
I tried a lot of different config.txt configuration ("thanks" to chatgpt), but all of them caused the images to flicker, not only in ES but in terminal too. I also tried to use 480p and 480i or to specify in es_settings.xml to use a different (480x640, 800x800,1024x768) resolution...no results.

Probably would be sufficient to magnify system font or to change colors (light gray against white isn't very contrastated), but I cannot find a file for doing this. I tried modifying the .xml of the theme (pixel-tft), but I didn't reach any result.

It's really a shame, because the system works well, but this first impact gives a bad impression.

How can i get a well readable ES interface?

# Impostazioni di base
dtparam=audio=on
arm_64bit=1
disable_fw_kms_setup=1
arm_boost=1

# Parametri per l'output VGA666 (DPI)
dtoverlay=vc4-kms-dpi-generic
dtparam=clock-frequency=13500000
dtparam=hactive=640,hfp=52,hsync=64,hbp=108
dtparam=vactive=240,vfp=26,vsync=3,vbp=43
dtparam=hsync-invert,vsync-invert
enable_dpi_lcd=1
display_default_lcd=1
dpi_group=2
dpi_mode=87
dpi_output_format=6 # RGB666 senza sincronizzazione invertita
hdmi_cvt=320 240 60 6 0 0 0

# Impostazioni HDMI
hdmi_force_hotplug=0
disable_fw_kms_setup=1
hdmi_safe=1

[mitu]

@DeMoN3 You should have opened a separate topic. While your setup may be similar to the original poster's setup, it's not the same problem. To answer to your question - you need to increase the resolution to get a better picture, the 240p you have won't work very well with ES.