Wolfenstein 3D and Spear of Destiny no longer working with WOLF4SDL

Striderx99

@mitu I used putty and looked up the OS: Raspian GNU/Linux 10 (Buster). The RetroPie version is 4.7.11.

Both Wolfenstein 3D and Spear of Destiny (Episode 1) are not working. I also tried Episodes 2 and 3 (Spear of Destiny) later today and obtained the same result.

I have included the following files after I installed Wolf4SDL (inside /home/pi/RetroPie/roms/ports/wolf3d). I also removed it and attempted to reinstall it to see if any of these games would work. I made sure to use lower case for each of the file names as well:

audiohed.sdm
audiohed.sod
audiohed.wl6
audiot.sdm
audiot.sod
audiot.wl6
config.sdm
config.sod
config.wl6
gamemaps.sd1
gamemaps.sd2
gamemaps.sd3
gamemaps.sdm
gamemaps.wl6
maphead.sd1
maphead.sd2
maphead.sd3
maphead.sdm
maphead.wl6
sod.exe
vgadict.sdm
vgadict.sod
vgadict.wl6
vgagraph.sdm
vgagraph.sod
vgagraph.wl6
vgahead.sdm
vgahead.sod
vgahead.wl6
vswap.sd1
vswap.sd2
vswap.sd3
vswap.sdm
vswap.wl6
wolf3d.exe

The .sh files for each of the games seem to be pointing to the correct vswap files. You can probably see what I'm doing wrong, but I don't have any ideas yet.

mitu

@Striderx99 said in Wolfenstein 3D and Spear of Destiny no longer working with WOLF4SDL:

@mitu I used putty and looked up the OS: Raspian GNU/Linux 10 (Buster). The RetroPie version is 4.7.11.

OK, what about the rest of the info requested ? The kerne version you posted looks like a ARM64 one, but Buster never got an official 64 bit image and RetroPie didn't support it.

I have included the following files after I installed Wolf4SDL (inside /home/pi/RetroPie/roms/ports/wolf3d)....

Remove any files from ports/wolf3d. Re-install Wolf4SDL and RetroPie will download the demos for the original and the SOD episode. Do they work ? If they don't, the issue is not the files present, but something else. On a stock RetroPie Pi4 installation, the demos work without any issue.

mitu

@Striderx99 do you still have this problem ?

tvferret

Hi, I have exactly the same problem, Wolfenstein 3d works, so is SoD demo. But the full version of SoD does not work, all three episodes exit immediately. All md5 checksums are correct. I have no idea what's causing this.

Cheers,
tvferret

mitu

@tvferret I've only tried the 1st SoD episode and it seems to work fine. If you wish to diagnose this further, please post the md5sum of the *.sd1 files and the details of your system, as asked in https://retropie.org.uk/forum/topic/3/read-this-first.

EDIT: just tested Ep 2 also and it's starting/playing fine.

sleve_mcdichael

@mitu I can confirm this error on Pi 4/Buster, using files:

b8ff4997461bafa5ef2a94c11f9de001  vswap.wl6
b1dac0a8786c7cdbb09331a4eba00652  vswap.sod

Using a previous binary (sorry I didn't note the version) they both worked but after update today wolf4sdl to pkg_repo_commit="dc8b250af35fb0ace68db5eb879490b50068c20e", both no longer work.

I can select new game, choose any episode, any difficulty, then it begins to load, shows "get psyched" graphic, and then segfaults and returns to EmulationStation.

Enter "options" menu and attempt to customize controls, also segfault.

Runcommand log does not give much to go on:

Parameters: 
Executing: /opt/retropie/ports/wolf4sdl/bin/wolf4sdl.sh "/home/pi/RetroPie/roms/ports/wolf3d/vswap.wl6"
~/RetroPie/roms/ports/wolf3d ~
/opt/retropie/ports/wolf4sdl/bin/wolf4sdl.sh: line 9: 30540 Segmentation fault      /opt/retropie/ports/wolf4sdl/bin/${game_checksums[$(get_md5sum $wad_file)]}
~

Also I note:

the target repo on github (AryanWolf3D/Wolf4SDL) redirects now to KS-Presto/Wolf4SDL instead.
the redirected repo KS-Presto/Wolf4SDL is archived 8mos. ago (RP binary match this commit), and directs in turn to a bitbucket repo for current updates.
I get a "something went wrong" error when I try to view https://bitbucket.org/ks-presto/wolf4sdl/src from my iDevice
I can however install from source the bitbucket version:

pkg_repo_url="https://bitbucket.org/ks-presto/wolf4sdl.git"
pkg_repo_branch="master"
pkg_repo_commit="a79d8cca0fa8afed54f27b59e14225421ad3284f"

...but behavior is unchanged, segfault occurs after "get psyched" or upon "customize controls."

...

@Striderx99 and @tvferret I don't have a solution for wolf4sdl but as a work-around and possible upgrade, you can use the ecwolf package which has more customizable control options for a modern gamepad controller, available from the optional RetroPie-Extra packages:

https://github.com/Exarkuniv/RetroPie-Extra

(Note that for ecwolf for SoD Ep1 you must undo the rename operation from the wolf4sdl docs ie. you should rename gamemaps.sd1 maphead.sd1 vswap.sd1 back to gamemaps.sod maphead.sod vswap.sod)

mitu

@sleve_mcdichael said in Wolfenstein 3D and Spear of Destiny no longer working with WOLF4SDL:

Using a previous binary (sorry I didn't note the version) they both worked but after update today wolf4sdl to pkg_repo_commit="dc8b250af35fb0ace68db5eb879490b50068c20e", both no longer work.

As you noticed the upstream repository is archived - and has been for quite some time so there are no recent changes related to this.

I'll take another look. My latest tests were on the new Bookworm but I did test on Buster the demos and there were no issues. Your experience is also a bit different than the previous posters', so I'm not sure it's the same issue.

mitu

@mitu said in Wolfenstein 3D and Spear of Destiny no longer working with WOLF4SDL:

I'll take another look.

I re-tested this on Buster and couldn't reproduce any crash. The md5sums are similar to what was posted.

.. segfault occurs after "get psyched" or upon "customize controls."

If you could get a gdb backtrace to see where it crashes, that would be more helpful to diagnose the issue. @sleve_mcdichael can you post also the rest of the .wl6 files' checksums ?

sleve_mcdichael

@sleve_mcdichael said in Wolfenstein 3D and Spear of Destiny no longer working with WOLF4SDL:

Using a previous binary (sorry I didn't note the version) ...

Ah, but I do have a recent backup with the retropie.pkg in it. Looks like my version was quite old after all:

pkg_repo_commit="f31f41a5e4e988377d255251fa6230bbe04a8dfd"
pkg_repo_date="2021-04-08T19:52:07+01:00"

...when I build this version f31f41a, it works as before.

Moving forward: After testing many different commits and getting inconsistent results...it's the config file?!

~/.wolf4sdl/config.wl6

Using the current RP binary wolf4sdl, then if I copy from roms folder (does not match the docs, but came from installation media):

c020f882b39d6057663e2780ddd109a3  config.wl6

...then it works.

If I delete the file entirely, then it works.
After launch*, the file is created on exit. Launch with that new file, works.
...if I place my old, backup config.wl6, then RP binary crash, but old f31f41a build, still work.

So it looks like new version wolf4sdl is somehow not compatible with old version config file.

Test:

Remove config
Build f31f41a
Launch - works!
Quit through menu (save config)
Install binary
Launch - crash after "get psyched"
Remove config
Launch - works!

Spear of Destiny also works again after remove config.sod.

Just delete the config!

E: also the bitbucket build works too, now. Don't know if there's any interest in switching to that one or not.
...

*(config file is created only if quit from menu. If quit with L3 button "hotkey" during a mission, no file is saved and log shows segfault -- maybe that's not meant an actual "quit" function and really just causing some sort of crash? When quit from menu, file is saved and log show no fault.)

mitu

@sleve_mcdichael thanks for testing and solution.

Since my installation was new, there was no 'config.wl6' (or similar file for SoD) and that's why I didn't experience the crash.

tvferret

@mitu, apologies, here are details of my hw and sw:

Raspberry Pi 3B
5V 3.5A Power Supply (from Amazon, dedidated for Pi3B)
Retropie 4.8
Installed Raspberry Pi OS using Raspberry Pi Imager

output of uname -a

pi@retropie:~/RetroPie/roms/ports/wolf3d $ uname -a
Linux retropie 5.10.103-v7+ #1529 SMP Tue Mar 8 12:21:37 GMT 2022 armv7l GNU/Linux

runcommand.log:

pi@retropie:~/RetroPie/roms/ports/wolf3d $ sudo cat /dev/shm/runcommand.log
Parameters:
Executing: /opt/retropie/ports/wolf4sdl/bin/wolf4sdl.sh "/home/pi/RetroPie/roms/ports/wolf3d/vswap.sd1"
~/RetroPie/roms/ports/wolf3d ~
~

md5

a41af25a2f193e7d4afbcc4301b3d1ce  audiohed.wl6
2385b488b18f8721633e5b2bdf054853  audiot.wl6
aa75133df873b660d2058425ca8539b3  config.wl6
a4e73706e100dc0cadfb02d23de46481  gamemaps.wl6
b8d2a78bc7c50da7ec9ab1d94f7975e1  maphead.wl6
dec8939cff5a4ec27ae7b43e8f52ec28  vgadict.wl6
8b40b5b785f898e229bf1c2f2e3ee003  vgagraph.wl6
8e75e3ffb842ed3d08abe6ffea97b231  vgahead.wl6
b8ff4997461bafa5ef2a94c11f9de001  vswap.wl6
6e914d15335125872737718470061ad8  audiohed.sod
10020fce0f04d21bd07b1b5b951c360a  audiot.sod
30b11372b9ec6bc06289eb3e9b2ef0b9  vgadict.sod
3b85f170098fb48d91d8bedd0cac4e0d  vgagraph.sod
fb75007a1167bba05c4acadf90bc30d8  vgahead.sod
04f16534235b4b57fc379d5709f88f4a  gamemaps.sd1
276c79a4a6419db6b23e7699e41cb9fa  maphead.sd1
b1dac0a8786c7cdbb09331a4eba00652  vswap.sd1
fa5752c5b1e25ee5c4a9ec0e9d4013a9  gamemaps.sd2
d55508cd58e2e61076ac81b98aeb9269  maphead.sd2
25d92ac0ba012a1e9335c747eb4ab177  vswap.sd2
29860b87c31348e163e10f8aa6f19295  gamemaps.sd3
a8b24dd3d3271e0b7fc6f2f995915f27  maphead.sd3
94aeef7980ef640c448087f92be16d83  vswap.sd3

I deleted config.sod as per @sleve_mcdichael suggestion but to no avail...

Thanks!

sleve_mcdichael

@tvferret said in Wolfenstein 3D and Spear of Destiny no longer working with WOLF4SDL:

I deleted config.sod as per @sleve_mcdichael suggestion but to no avail...

From where? I see it's not listed in your md5's from the rom folder, but did you also delete the one in ~/.wolf4sdl (symlink/network share: /opt/retropie/configs/ports/wolf3d)?

tvferret

@sleve_mcdichael I deleted it from ~/RetroPie/roms/ports/wolf3d. There is no config.sod in /opt/retropie/configs/ports/wolf3d.

BTW, my initial installation of wolf4sdl was from binaries. I just reinstalled from sources but same thing, SOD (all 3 episodes immediately exit, i just see a flash of the initial screen and then back to emulatorstation. Original Wolfenstein 3D works like a charm.

mitu

@tvferret I think your installation may be incomplete, looking at the .sd1/.sd2 files that I have, there are more files present in my installation than yours. What's the source of your game ?

tvferret

@mitu I got my game from GOG (I think). I have 9 sod files for each SoD mission pack.

6 that are shared between mission packs (same md5sum for all three mission packs):

-rw-r--r-- 1 pi pi   1072 Dec 30 10:32 audiohed.sod
-rw-r--r-- 1 pi pi 328620 Dec 30 10:32 audiot.sod
-rw-r--r-- 1 pi pi    522 Dec 30 10:32 config.sod
-rw-r--r-- 1 pi pi   1024 Dec 30 10:32 vgadict.sod
-rw-r--r-- 1 pi pi 947979 Dec 30 10:32 vgagraph.sod
-rw-r--r-- 1 pi pi    510 Dec 30 10:32 vgahead.sod

and three mission pack specific (below for mission pack 1 but I have matching sd2 and sd3 fiules for the other mission packs):

-rw-r--r-- 1 pi pi   68290 Dec 30 10:32 gamemaps.sd1
-rw-r--r-- 1 pi pi     402 Dec 30 10:32 maphead.sd1
-rw-r--r-- 1 pi pi 1616544 Dec 30 10:32 vswap.sd1

This matches the Wolfenstein 3D files where there are 9 .wl6 files:

-rw-r--r-- 1 pi pi    1156 Dec 30 10:22 audiohed.wl6
-rw-r--r-- 1 pi pi  320209 Dec 30 10:22 audiot.wl6
-rw-r--r-- 1 pi pi     522 Dec 30 10:22 config.wl6
-rw-r--r-- 1 pi pi  150652 Dec 30 10:22 gamemaps.wl6
-rw-r--r-- 1 pi pi     402 Dec 30 10:22 maphead.wl6
-rw-r--r-- 1 pi pi    1024 Dec 30 10:22 vgadict.wl6
-rw-r--r-- 1 pi pi  275774 Dec 30 10:22 vgagraph.wl6
-rw-r--r-- 1 pi pi     450 Dec 30 10:22 vgahead.wl6
-rw-r--r-- 1 pi pi 1544376 Dec 30 10:22 vswap.wl6

tvferret

BTW, these files work perfectly well in DOSBox:

mitu

Strage then. I got the files from the same source - GOG.

tvferret

@mitu OK, I sorted it out. The instructions on RetroPie docs site are wrong. One must copy/rename all 9 files (not just 3 as instructed) to sd1, sd2 and sd3.

Here is the listing of the correct files:

-rw-r--r-- 1 pi pi    1072 Jan 10 10:19 audiohed.sd1
-rw-r--r-- 1 pi pi    1072 Jan 10 10:21 audiohed.sd2
-rw-r--r-- 1 pi pi    1072 Jan 10 10:22 audiohed.sd3
-rw-r--r-- 1 pi pi  328620 Jan 10 10:19 audiot.sd1
-rw-r--r-- 1 pi pi  328620 Jan 10 10:21 audiot.sd2
-rw-r--r-- 1 pi pi  328620 Jan 10 10:23 audiot.sd3
-rw-r--r-- 1 pi pi     522 Jan 10 10:19 config.sd1
-rw-r--r-- 1 pi pi     522 Jan 10 10:21 config.sd2
-rw-r--r-- 1 pi pi     522 Jan 10 10:23 config.sd3
-rw-r--r-- 1 pi pi   68290 Dec 30 10:32 gamemaps.sd1
-rw-r--r-- 1 pi pi  135024 Dec 30 10:32 gamemaps.sd2
-rw-r--r-- 1 pi pi  148534 Dec 30 10:32 gamemaps.sd3
-rw-r--r-- 1 pi pi     402 Dec 30 10:32 maphead.sd1
-rw-r--r-- 1 pi pi      86 Dec 30 10:32 maphead.sd2
-rw-r--r-- 1 pi pi      86 Dec 30 10:32 maphead.sd3
-rw-r--r-- 1 pi pi    1024 Jan 10 10:19 vgadict.sd1
-rw-r--r-- 1 pi pi    1024 Jan 10 10:22 vgadict.sd2
-rw-r--r-- 1 pi pi    1024 Jan 10 10:23 vgadict.sd3
-rw-r--r-- 1 pi pi  947979 Jan 10 10:19 vgagraph.sd1
-rw-r--r-- 1 pi pi  947979 Jan 10 10:22 vgagraph.sd2
-rw-r--r-- 1 pi pi  947979 Jan 10 10:23 vgagraph.sd3
-rw-r--r-- 1 pi pi     510 Jan 10 10:20 vgahead.sd1
-rw-r--r-- 1 pi pi     510 Jan 10 10:22 vgahead.sd2
-rw-r--r-- 1 pi pi     510 Jan 10 10:23 vgahead.sd3
-rw-r--r-- 1 pi pi 1616544 Dec 30 10:32 vswap.sd1
-rw-r--r-- 1 pi pi 1879712 Dec 30 10:32 vswap.sd2
-rw-r--r-- 1 pi pi 1881760 Dec 30 10:32 vswap.sd3

The docs page should be updated with correct info.

Cheers!

mitu

@tvferret said in Wolfenstein 3D and Spear of Destiny no longer working with WOLF4SDL:

The instructions on RetroPie docs site are wrong

It seem that For Spear of Destiny they're incomplete and they're only referring to the Steam version. I'll add the info about GOG, I though the renaming was already mentioned in the docs since the GOG kit contains each episode in separate folders and they files are always named .sod. Thanks for testing.

sleve_mcdichael

@tvferret said in Wolfenstein 3D and Spear of Destiny no longer working with WOLF4SDL:

OK, I sorted it out. (...) One must copy/rename all 9 files (not just 3 as instructed) to sd1, sd2 and sd3.

Yes I am seeing this now too. Can confirm this is new behavior introduced between f31f41a and dc8b250. New version requires ~~all 9 files~~ (all 8, you don't need config.* I think) share the same extension, either sd1 sd2 sd3 (or .sod).

I didn't see this before because I didn't have eps 2 and 3 installed, and I'm using already the sod version filenames of ep1 for intercompatibility with ecwolf.