Development of module-script generator for lr-mess, lr-mame and mame standalone

@DTEAM said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

Columbus Circle FC Compact 88-in-1 (CC-SFFC-WT) (Japan) [TeamEurope, David Haywood]

Driver name is :
fccomp88

Will be in All in one gamelist

profiteer

Moving my discussion of this to here. I managed to get MAME, lr-mame, and lr-mess installed onto my system, installed the necessary cdi drivers (cdibios, cdimono1, and cdimono2), and dropped my roms into both cdibios, cdimono1, and cdimono2 (my roms are US-based, so I tested it with all 3 just for the heck of it). I used cdrm-autoframeskip in all 3 instances with no luck.

EDIT: I tested with both mame and lr-mess' cdimono*-cdrm and their autoframeskip variations. Still no luck.

Folly

@DTEAM said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@Folly said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@DTEAM said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

Columbus Circle FC Compact 88-in-1 (CC-SFFC-WT) (Japan) [TeamEurope, David Haywood]

Driver name is :
fccomp88

Will be in All in one gamelist

Correct, my database has the same info.

Folly

@profiteer said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

Moving my discussion of this to here. I managed to get MAME, lr-mame, and lr-mess installed onto my system, installed the necessary cdi drivers (cdibios, cdimono1, and cdimono2), and dropped my roms into both cdibios, cdimono1, and cdimono2 (my roms are US-based, so I tested it with all 3 just for the heck of it). I used cdrm-autoframeskip in all 3 instances with no luck.

EDIT: I tested with both mame and lr-mess' cdimono*-cdrm and their autoframeskip variations. Still no luck.

I read your help topic.
I am really not sure if the mame binaries, installed by my script, will work on your Mint installation.
You should test mame from the terminal first to see if it's working.
I read that you used the retropie_packages.sh script so trying mame from the commandline should be doable for you.
Just run :

/opt/retropie/emulators/mame/mame -ui_active

If it fails you should get an error, else you should see this :

profiteer

@Folly Command runs flawlessly. I can get the full UI and navigate wherever. In BIOS, only the PAL version seemed to populate though. Is that intentional?

Folly

@profiteer said in Development of module-script generator for lr-mess, lr-mame and mame standalone:

@Folly Command runs flawlessly. I can get the full UI and navigate wherever.
Ok, good to know that the binary works.

In BIOS, only the PAL version seemed to populate though. Is that intentional?

Can you describe a bit better what you mean ?

(I don't know what version was in the US so I don't know if the US bios is in for example cdibios, cdimono1 or cdimono2)

profiteer

@Folly

This is what I see in MAME. The CD-i (Mono-I)(PAL) BIOS is the only BIOS that exists in the BIOS menu from the left sidebar and while I see the PAL and US version of Hotel Mario, the PAL version is the one that's white and the US version is grayed out.

Folly

@profiteer

Just checked my database :
Driver cdibios (CD-i (Mono-I) (PAL) BIOS): @arcade@bios@screenless@system@
Driver cdimono1 (CD-i (Mono-I) (PAL)): @game_console@good@home_videogame@non-arcade@
Driver cdimono2 (CD-i (Mono-II) (NTSC)): @game_console@home_videogame@non-arcade@

cdimono1 is the only "good" driver in mame.
The data for these drivers is extracted with -listxml, for cdimono2 we can check the status :

/opt/retropie/emulators/mame/mame -listxml cdimono2|grep emulation=
      	<driver status="preliminary" emulation="preliminary" savestate="unsupported"/>

That is probably the reason why it's gray.
Although it's preliminary we are able to try to see if it works but I would start with "Hotel Mario (Europe)" on cdimono1 for starters.
I added a patch when cdimono1 is installed from my script so mouse and/or joystick will work better.

profiteer

@Folly Okay, cool. Sounds good. I have my PAL .chd file in the cdimono1 rom folder and renamed it to the software name as it's listed in MAME, but it still won't get recognized for whatever reason. Should I make sure the SHA1 hashes are the same?

Folly

@profiteer

BTW:
You must be aware that cdi games with video that use the mpeg cartridge will not work.

You can find more info in the hash tables locally or online :
/opt/retropie/emulators/mame/hash/cdi.xml

If you use the software name "hotmario" then the sha1 should be the same if I remember correctly (It has been a while back for me).
But this game should work, I have played it on mame.

If it fails then check the runcommand.log in /dev/shm/.
It's always created after a try, here you can find more info on whats going wrong.

Good luck, will check you posts tomorrow.