Cannot set enable hotkey button with saturn controller

MetalMilitia

It doesn't appear to recognize anything when I press them for some reason...

CortexVacua

@MetalMilitia the shoulder buttons? or any buttons?

MetalMilitia

The shoulder buttons. I got a response from all other buttons luckily.

CortexVacua

@MetalMilitia ok so it seems the retropie doesn't get a signal. Im not sure if setting up the controller as a 360 pad with this tutorial would make the shoulder buttons register https://github.com/RetroPie/RetroPie-Setup/wiki/Universal-Controller-Calibration-&-Mapping-Using-xboxdrv . What you could do though, is what edmaul69 recommended and change the hotkey function of select button over to the start button.

This would only affect this specific controller! Other controllers would still exit games via SELECT + START

If you want to do that I could guide you through.

MetalMilitia

Yea I think I'd rather just change the hotkey. I could set one of the top row of buttons to be the enable hotkey since there aren't too many 6 button games to begin with.

CortexVacua

Do you know what to do or do you need assistance?

MetalMilitia

Assistance would be greatly appreciated.

CortexVacua

Ok so first thing you will need to do is run "jstest /dev/input/js0" again and write down wich button the start button corresponds to (for example: button 9) and do the sam for every button you want to have a function. If you don't want to change any of the other configs. Just get the button for START and the button you want to exit the game (for example Z).

When you have done this write their button values in here.

edmaul69

@MetalMilitia i would make exit the middle top button. The least likely button to accidently hit while pressing start.

MetalMilitia

Start is 9 and the top middle button is 3.

CortexVacua

ok now quit out of jtest by pressing CTRL + C

After you have done this

type in "sudo nano /opt/retropie/configs/all/retroarch-joypads/" WITHOUT pressing enter.

Than press tab 2 times until the tree shows you all your controller

than write in the controller you want to reconfigure:

for example
"sudo nano /opt/retropie/configs/all/retroarch-joypads/Nintendo\ Wii\ Remote\ Pro\ Controller.cfg" and dont forget to put backslashes in front of every space like I did

And tell me if the cfg. file opened

CortexVacua

@MetalMilitia
Well I have to go to sleep now, so I'll just assume everything worked up to that point.
Now edit input_enable_hotkey_btn = " " --> input_enable_hotkey_btn = "9"
and input_exit_emulator_btn = " " --> input_exit_emulator_btn = "3"

then press CTRL + X
Ther will be a prompt, asking if you want to save. Press Y. There should be another prompt asking if you want to save over the old file press ENTER. And that's it.

Should work now.

MetalMilitia

Sorry about that! Had to step away for a bit yesterday. I will give this a shot today. Thanks for all the help!

MetalMilitia

@CortexVacua said in Cannot set enable hotkey button with saturn controller:

input_exit_emulator_btn = " "

Got it all worked out. I really appreciate the help! Thanks again!

CortexVacua

No problem dude, glad to help.