Pi3 in an atari 2600 flashback.

edmaul69

@spruce_m00se had to dremel down the heatsink and remove the fan to get it to fit. 3d printed posts that got epoxy'd to the top case to screw the bootom into.

alt text

spruce_m00se

@edmaul69 thats cool, whats the board doing to switches to usb? how well do the 3d printed parts stick to the plastic with epoxy? is it a noisey beast?

Capeman

I did a pi in an original woody
Consider laser cutting the panels for a professional finish, it's pretty easy, i can give you some pointers if you want.

https://retropie.org.uk/forum/topic/4935/custom-atari-2600-retropie-with-laser-cut-panels

edmaul69

@spruce_m00se the parts epoxy'd good. Im not sure what you are asking about usb? And it actually is pretty quiet.

tashman

@spruce_m00se

Looks really good. Last year I bought an Atari Flashback from eBay for the same purpose. Unfortunately I made a complete pigs ear of it by hacking a big ugly hole in the back so that most of the Pi would be exposed so the ports are accessible. It didn't turn out too well so I abandoned that project....

spruce_m00se

@tashman I found that putting the pi at an angle helped.
Also I have de-soldered the usb power, the rj45 and USB ports from the pi, they were removed for another project which got abandoned, I wouldnt normally have needed to, but having removed them I could solder cables directly to the external usb port and saved some cost and space.
I feel like i messed up the hole around the hdmi plug a bit, but its not too bad

spruce_m00se

@edmaul69 it looks like you have the original switches hooked onto an adaptor board that makes them a usb device?

spruce_m00se

@Capeman that looks great!!
im not sure how I feel about the laser cut parts, I like a more original look, but they look very good none the less,
I like the way you have hacked the switches onto a keyboard matrix pcb, thats a very good idea I may well have to steal for a future project, I would love to have the basic keyboard buttons on the front panel, F1 and F3 etc to run the games on the C64, and a hard wired save state button set would be awesome.

Capeman

@spruce_m00se said in Pi3 in an atari 2600 flashback.:

I like the way you have hacked the switches onto a keyboard matrix pcb, thats a very good idea I may well have to steal for a future project

It works really good for what i use it for. The only catch is if you have the hotkey button enabled on the controller, the retroarch function buttons (save state, load state, hard pause, reset, etc.) on the keyboard buttons will also require you to hold the hotkey button on the controller, it's kind of weird, you'd think keyboard and controller settings would be isolated.

This is OK for me because i didnt want ANY of the funtion buttons on the controller, especially exit game (the ADD in me would just switch games like channels)... i like the idea of walking across the room to reset, keeps me more involved in whatever game I'm playing.

spruce_m00se

its funny you mention having to walk across the room, I found that having to press a button on the console also stopped me switching games as often, also having only one system on the console meant that I enjoyed playing that system more than just flicking through.