A tutorial to getting the most out of the Intellivision with Jzintv

edmaul69

@mediamogul when you say rom do you mean .rom or .itv?

mediamogul

sorry, .itv.

edmaul69

@mediamogul i could not find an .itv rom anywhere however, i can tell you that joe states they work there is no doubt in my mind knowing joe personally that it works. He is a programmer for google and he is a phenomenal programmer.

mediamogul

@edmaul69

That's good enough for me. I'll start up an issue. Thanks for checking into it. Is it just me, or has there been a pretty major surge in intellivision interest lately. Nice to see the system getting some love.

edmaul69

@mediamogul it is nice to see the love. Its the last retro console i ever bought (except my ps1 that i never tested and stuck a pi in) and had never played it before 2011. But i fell in love with it and my first pi was built into an intellivision flashback.

GameNut

I just recently installed Retropie on a Raspberry Pi3. I also purchased the Ultimate PC Interface for using Flashback controllers. How do I get the controller configured in Retropie? When it first loads up, it detects the controller, but none of the buttons or the disc work. Please help!

edmaul69

@gamenut go to intellivision.us. There is a download for the ultimate intellivision or something like that. It has the files needed for raspberry pi. In it there is the hackfile.cfg which is the controls. You need to edit the emulators.cfg to look for it. If you look at the info above it should show info pointing to the hackfile.cfg and where you should put it. If you are using something other than a vision-daptor, ultimate pc interface or ultimate flashback interface you need to edit the controls to match what you are using. You shouldnt have to edit directions just the buttons.

Edit: i see you have a upci

gpmcty

I would like to share a couple tips to this tutorial to further improve the emulation experience with JZINTV. Edmaul69's tutorial was a great help to me in getting JZINTV to work. I currently have RetroPie installed on both a Raspberry Pi and a laptop running Ubuntu 18.04LTS.

I have my emulators.cfg file setup as Edmaul69 suggests with an entry for non ECS and ECS games. The flag for the ECS is "-s". For the "jzintvecs" entry he adds "-s1" which is enabling the ECS. The flag was omitted in the non-ECS entry. One side effect I was experiencing with this setting was being shown the Intellivision ECS splash screen on some non-ECS games such as B17 Bomber. To fix this I added the "-s0" flag to the "jzintv" entry disabling the ECS. After adding the flag B17 Bomber started properly.

The next tweak is for the hard core group. With a little Googling for the exec rom, most will find there are actually two available. One is the standard exec from the Mattel Intellivision. The other is the Sears variation. Using the "-e" flag you can specify the exact location of the exec rom image and overide looking in the BIOS folder for the exec. Usage is as follows without quotes "-e /home/pi/RetroPie/BIOS/exec.int". My emulators.cfg has 4 entries. Mattel, MattelECS, Sears, SearsECS. I shortened the name of the Sears bios to make it easy to type.
0_1537449201945_Screenshot from 2018-09-20 09-09-45.png

Hope this helps,

Greg McCartney

mitu

@gpmcty Thanks for contributing !
Can you add the contents of the file as text instead of image ? It would muuch easier for users to add your settings to their configuration. You can surround the text with code tags ( ```) so it's more readable.

gpmcty

Thanks for letting me know how to do that.

Mattel= "/opt/retropie/emulators/jzintv/bin/jzintv -z1 -f1 -v1 -s0 -e /home/pi/RetroPie/BIOS/exec.int --kbdhackfile=/opt/retropie/configs/intellivision/hackfile.cfg -p /home/pi/RetroPie/BIOS -q %ROM%"

Sears= "/opt/retropie/emulators/jzintv/bin/jzintv -z1 -f1 -v1 -s0 -e /home/pi/RetroPie/BIOS/Sears.int --kbdhackfile=/opt/retropie/configs/intellivision/hackfile.cfg -p /home/pi/RetroPie/BIOS -q %ROM%"

MattelECS= "/opt/retropie/emulators/jzintv/bin/jzintv -z1 -f1 -v1 -s1 -e /home/pi/RetroPie/BIOS/exec.int --kbdhackfile=/opt/retropie/configs/intellivision/hackfile.cfg -p /home/pi/RetroPie/BIOS -q %ROM%"

SearsECS= "/opt/retropie/emulators/jzintv/bin/jzintv -z1 -f1 -v1 -s1 -e /home/pi/RetroPie/BIOS/Sears.int --kbdhackfile=/opt/retropie/configs/intellivision/hackfile.cfg -p /home/pi/RetroPie/BIOS -q %ROM%"

default = "Mattel"

One other thing I forgot to mention. Some of the homebrew games like Ms. Pac-man did not work with the version of JZINTV that was installed by default. I don't know if that has been updated or not. I downloaded the latest version from JZINTV site and just swapped out the file in the /opt/retropie/emulators/intellivision/jzintv/bin file. Then changed the ownership to root and it seemed to work fine.

Greg McCartney

mitu

@gpmcty I edited your post slightly and made it look like one big file, without line breaks. Should be easier to copy/paste to a configuration file.

edmaul69

@gpmcty i could throw a monkey wrench in this and tell you there is also a tutorvision exec and at least two of the tutorvision games available. 😁😁 Also requires getting the emulators from the jzintv homepage as the ones available on Retropie are outdated.

gpmcty

@edmaul69 might as well keep going down this rabbit hole. LOL

gpmcty

Here we go

Tudorvision= "/opt/retropie/emulators/jzintv/bin/jzintv -z1 -f1 -v1 -s0 -e /home/pi/RetroPie/BIOS/wbexec.bin -g /home/pi/RetroPie/BIOS/wbgrom.bin --kbdhackfile=/opt/retropie/configs/intellivision/hackfile.cfg -p /home/pi/RetroPie/BIOS -q %ROM%"

edmaul69

@gpmcty so did you find the wbexec wbgrom and the games?

edmaul69

@gpmcty i am going to send you even further down the rabbit hole. a guy on atariage made an rca studio 2 emulator for the intellivision. each "studiovision" game has the emulator built into it. to play the games in full screen use this. edit how you like. if you remove the -G2 flag it wont be full screen and will have instruction overlay. and this is unnecessary for that

studio2 = "/opt/retropie/emulators/jzintv2/bin/jzintv -v1 -G2 --kbdhackfile=/opt/retropie/configs/intellivision/hackfile.cfg -f1 -q -p /home/pi/RetroPie/BIOS %ROM%"

edmaul69

@gpmcty also, in emulators.cfg rename the default emulator from “jzintv =“ and “default = jzintv” to jzintv2 and repoint everything from

/opt/retropie/emulators/jzintv/

folder to

/opt/retropie/emulators/jzintv2/

Then rename the folder

/opt/retropie/emulators/jzintv/

To

/opt/retropie/emulators/jzintv2/

Otherwise an update will mess all your crap up.

mediamogul

@edmaul69

With our recent talk about 'Ultimate PONG', I got to thinking that this weekend would be a great opportunity to try out the four player modes, as I have some friends coming over. However, after searching around a good bit, I don't see any mention of how the two additional controllers should be mapped. I'm of course using the 'jzintvecs' launch command as illustrated above and everything launches successfully, but I'm unsure how to continue. Is the ECS keyboard used for the other two players?

edmaul69

@mediamogul what you do is run the game as an ecs game. Thats how it plays four players on a real machine.

edmaul69

@mediamogul if you find the super soccer rom it plays 4 players with ecs as well.