Versatile C++ game scraper: Skyscraper

muldjord

This post is deleted!

muldjord

Just a heads up to all Skyscraper users. From 3.0.0 "localdb" will change name entirely to "cache". It's another of the big changes in 3.0.0, which means that a lot of config variables will change name and the old ones will be removed. I realize this might seem inconvenient for current users, but this really is a change that needed to happen as the "localdb" name was rather confusing when I often used it in conjunction with "cache" since it's the same thing.

@mitu Is the localdb name used in the script? I can't remember. Please change it to "cache" instead if it is.

EDIT: --purgedb vacuumwill become --cache vacuum & --purgedb all will become --cache purge:all. Also, the ~/.skyscraper/dbs folder will become ~/.skyscraper/cache. This will automatically be renamed for users when they run Skyscraper the first time after updating to 3.0.0.

Halvhjearne

@muldjord

i mananged to scrape all my games like this just using the shortnames, which in most cases is the same as the svm filename, except when its called something like kq6-cd or gob1cd-us.
in those cases i just used the real shortname from scummvm, alltho a game like the sci remake of larry i had to search for lsl1sci and for vga remake of quest for glory i searched for qfg1vga, which is ofcourse also the "real" shortnames for those games.

mitu

@muldjord I think there's one place in the help section referring to LocalDB. Does this mean also -s localdb is now -s cache ?

I'll have to fix the purge commands then, in the new version I used the purgedb commands instead of manually removing the cache data.

But this last change will create an incompatibility with the old installations - if the script is updated without updating Skycraper script or vice-versa (script updated, but not Skyscraper).

muldjord

@mitu Yes, it is now technically -s cache but just leave it out entirely (which is then compatible with both 2.x and 3.x) as it's not necessary. If -s cache is left out it will default to create a game list. So creating a game list should always just be Skyscraper -p <platform> without -s.

And yes, there will be incompatibility with the purge options, so we'd need to coordinate the release precisely somehow.

EDIT: I've added auto-migration from old config.ini format to new 3.0.0 format. I also auto-migrate the "dbs" folder to "cache" automatically. So you don't need to worry about this.

EDIT: --refresh is now --cache refresh btw, so that should be changed aswell when we "flip the switch". I will still support the --refresh option for a while, so we can just use that until we feel like most users updated to 3.0.0.

megaJekan

@mitu said in Versatile C++ game scraper: Skyscraper:

@megaJekan Can you give some examples ?

I tried to rename ROM filenames (to match the internal ScreenScraper name), that solved the most of the issues. Sometimes underscores are the source of problem.

For SNES I can report that I still have problems with scrapping these ROMs:

Power Lode Runner
https://www.screenscraper.fr/gameinfos.php?plateforme=110&gameid=64853
(probably because Nintendo Power is written as platform instead of Super Nintendo)

Super Tetris 2 + Bombliss
https://www.screenscraper.fr/gameinfos.php?plateforme=4&gameid=65158
(maybe '+' sign in the name is an issue)

Radical Dreamers
https://www.screenscraper.fr/gameinfos.php?plateforme=107&gameid=108733
(Satellaview is written as platform instead of SNES)

My ROMs have totally different md5, than in the ScreenScraper database. Then I have one more question. Can I add my own filenames and md5 checksums to screenscrapper.fr?

muldjord

@megaJekan You can use the --query option to force md5 sums for any rom: https://github.com/muldjord/skyscraper/blob/master/docs/CLIHELP.md#--query-string

Silent

@muldjord said in Versatile C++ game scraper: Skyscraper:

And yes, there will be incompatibility, so we'd need to coordinate the release precisely somehow.

Why not leave those as undocumented aliases for compatibility? Yes, it sucks, but sometimes you gotta do what you gotta do.

Either that or the RetroPie-Setup script should detect the exact Skyscraper version and adapt. Is this possible?

muldjord

@Silent I think you answered that yourself. Because it sucks (and I can't "ghost" them, they will be visible and cause confusion). ;) And I do migrate old config.ini and folders. And it's to be expected that there are changes for major versions. Users should know that. I do keep the --refreshfor a while though, so for those where it makes sense, I do actually keep them a couple months. And the change from localdb to cache is compatible with both versions, as it should be simply left out for both which gives the same result. I think, in the end, this will turn out to be a non-issue when it comes to the script as we can work around it.

muldjord

Skyscraper 3.0.0 released: https://github.com/muldjord/skyscraper

Game list creation and media compositing now only processed when leaving out the -s option
Now converts textual "\n" in descriptions to newlines. Useful when importing textual data (Thank you to "scthirouin" for requesting it)
Added disk space check. Now aborts if disk has less than 200 megs left
Updated "igdb" API til APIv3000. Key now global for all users
Fixed ES game list release dates by adding "T000000" (Thank you to "michaelbaudino" for noticing)
Added "subdirs" to config.ini (Thank you to "otherguy" for noticing it was missing)
"--startat" and "--endat" now supports current workdir file paths
Changed "allowExtension" config variable to "addExtensions"
Changed "noHints" config variable to "hints"
Changed "noBrackets" config variable to "brackets"
Changed "noResize" config variable to "resize"
Removed "--updatedb" cli option as it was deprecated (use "--cache refresh" instead)
Removed "--nolocaldb" cli option as it is irrelevant after 3.0.0 usage changes
Changed "--allowext" cli option to "--addext"
Removed "localDb"/"cache" config sections and moved options to "main"
Removed "userCreds" option from main and platform sections in config.ini. They should be set in scraping module section instead
Removed "scraper" config.ini variable as it made no sense to ever set it like that
Changed "startat" config.ini option to "startAt" to conform with style of other variables
Changed "endat" config.ini option to "endAt" to conform with style of other variables
Fixed "--relative" option when combined with roms in subdirs
"--unattend" options now answers "y" to all "--cache purge:" prompts automatically
Added "regionPrios" and "langPrios" variables to config.ini for main and platform sections
Added auto-migration from old config.ini format to v3.0.0 format
Added auto-migration from "dbs" folder to "cache" folder
Optimized "--cache validate" A LOT
Now converts ES game list entries to <folder> entries if a .cue or .m3u file is found in a subfolder. This causes the information and artwork to be shown when selecting the folder in ES rather than the .cue or .m3u file inside the subfolder. This is very useful for psx scraping

This release is a major release. It contains a couple of name convention changes that users will need to adjust to. The old localdb module is now simply called the game list generation mode and it enabled by leaving out the -s <MODULE> option entirely. The -s option is used for gathering data into the resource cache. When you've gathered the resources you need, you simply run it again for the platform without the -s option to generate the game list.

Some command line options have changed a bit. Most importantly, all things related to the resource cache (previously known as the localdb cache) have been converged into the new --cache option. Please check out the full documentation for all available options here: https://github.com/muldjord/skyscraper/blob/master/docs/CLIHELP.md

Some config.ini variables have changes names. And the dbs folder is now called cache. All of this will be auto-migrated when you start Skyscraper 3.0.0 for the first time.

Some fixes also made it in. Most importantly the --relative option have been fixed for users who have roms in subfolders. And for users who scrape .cue or .m3u files in subfolders, Skyscraper will now autodetect this and convert the game list entry to a <folder> entry instead of a <game> entry. This means that the game data and artwork will show when selecting the folder in EmulationStation.

The igdb module has been updated to APIv3000. As the old module violated the terms of use for the database, it now uses a global key and therefore no longer requires user credentials to be used. There is a big caveat to this though, as the key provided with Skyscraper has a limit of 10000 requests per month for the entire Skyscraper user base. For this reason the module has been limited to 5 rom scrapins per run. Supply file names on command line to use it or use the --startat and --endat options to narrow it down to 5 roms. The module also doesn't support artwork (neither did it before), as it doesn't distinguish between platform versions for each screenshot. So these had to be left out. But it is still suitable for grabbing textual data if you have a few hard-to-scrape roms.

Lastly, the docs have been completely overhauled. I've documented all of the command line options and all of the available config.ini options. The scraping modules now have their own documentation and the same goes for language and region support. Please check all of the new and updated docs in the new /docs folder here: https://github.com/muldjord/skyscraper/tree/master/docs

Thank you to everyone who helped out with suggestions and well-documented bug reports. This new release also coincides with the newly updated RetroPie-Setup script (so be sure to update your RetroPie script prior to updating Skyscraper if you've installed Skyscraper from there) made by @mitu . Thanks for your work on this!

mitu

Congratulations on the new release. Thank you for the continuous work on Skyscraper ! Docs should be updated soon, following the updates in the wiki.

BuZz

@mitu @muldjord thanks!

Silent

@muldjord said in Versatile C++ game scraper: Skyscraper:

Now converts ES game list entries to <folder> entries if a .cue or .m3u file is found in a subfolder. This causes the information and artwork to be shown when selecting the folder in ES rather than the .cue or .m3u file inside the subfolder. This is very useful for psx scraping

Can you give an example? This is the only changelog entry which I don't find too clear.

Congratulations on the release, too! Looking forward to scraping some PC titles with IGDB =)

muldjord

@Silent said in Versatile C++ game scraper: Skyscraper:

Can you give an example? This is the only changelog entry which I don't find too clear.

Check further down :) I elaborate on it there.

LineOf7s

I've never had much luck scraping my Amiga games despite all the improvements made recently. With the release of v3.0.0, what's the best way for me to remove anything I've scraped in the past and start again from scratch? FS-UAE Arcade on Windows also scrapes from OpenRetro.org and I'm hoping for something approaching that level of success (which I'm sure SkyScraper can do).

muldjord

@LineOf7s Best approach is simply to run the following commands:

$ Skyscraper -p amiga -s openretro --refresh
$ Skyscraper -p amiga

The openretro module has been improved a bit, so you might have luck with that. With that said, I would strongly recommend using the RetroPlay lha files with Amiberry. It turns the Amiga into almost-a-console in that it uses the WHDLoad files. And Skyscraper scrapes these really well with OpenRetro since I've worked behind-the-scenes with some really cool guys to make use of OpenRetro's uuid's for these games.

megaJekan

Finally figured out how to use skyscrapper in command line mode. Unfortunately, when I scrap single roms, it always writes in log that "Pretend is set" (event if I set it to false in config.ini). So my custom query works, the game is found, but gamelist.xml is not updated. When I don't specify a filename, it goes through all roms per platform and works fine.

mitu

@megaJekan The new 3.0.0 version no longer updates your gamelist.xml after gathering the info, you need to run the scraper again to generate the gamelist(s) - as indicated by @muldjord above - adding just the platform parameter.

muldjord

@megaJekan And you can just remove the pretend from your config again. It isn't relevant.

megaJekan

@mitu said in Versatile C++ game scraper: Skyscraper:

@megaJekan The new 3.0.0 version no longer updates your gamelist.xml after gathering the info, you need to run the scraper again to generate the gamelist(s) - as indicated by @muldjord above - adding just the platform parameter.

Thanks. I am still using the old version. The problem was that I haven't read the documentation for scraping single roms carefully enough: "It DOES NOT update it in your game list. To do so you need to regenerate the game list by simply leaving out the -s option entirely like so Skyscraper -p [platform]."