SNES CONTROLLER CONFIG - LEFT DPAD NOT WORKING
-
Pi Model or other hardware: RPI3
Power Supply used: 5V, 2A
RetroPie Version Used (eg 3.6, 3.8.1, 4.1 - do not write latest): 4.2
Built From: RetroPie official image
USB Devices connected: keyboard and snes compatible gamepad
Controller used: (https://www.banggood.com/SNES-USB-Famicom-Colored-Super-Nintendo-Controller-for-PCMAC-p-923100.html)Guide used: https://github.com/retropie/retropie-setup/wiki/RetroArch-Configuration
Emulator: mame4all - MAME 0.37b5 romsetHow to replicate the problem:
Hi guys, since last two days I'm going mad tring to setup my usb controllers:
the Autoconfiguration from Emulationstation works fine, and i can use controller without any problems inside the Emulationstation
Problem begins on Mame games, LEFT DPAD never works, I can move all the other directions and use buttons, but not go back (left).
Now seems I messed up something and neither the SELECT button or ENTER button on keyboard works anymore in any retroarch menù.my file
/opt/retropie/configs/all/retroarch-joypadslooks like this, exactly like in the guide:
input_device = "USB gamepad "
input_driver = "udev"
input_r_btn = "5"
input_save_state_btn = "5"
input_start_btn = "9"
input_exit_emulator_btn = "9"
input_l_btn = "4"
input_load_state_btn = "4"
input_up_axis = "-1"
input_a_btn = "1"
input_b_btn = "2"
input_reset_btn = "2"
input_down_axis = "+1"
input_right_axis = "+0"
input_state_slot_increase_axis = "+0"
input_x_btn = "0"
input_menu_toggle_btn = "0"
input_select_btn = "8"
input_enable_hotkey_btn = "8"
input_y_btn = "3"
input_left_axis = "-0"
input_state_slot_decrease_axis = "-0"and in entering terminal using test command:
jstest /dev/input/js0
my pad works fine, so that the mapping correspond to the above config file.
Can some one please point me to the config files that I have to replace/delete/update in order to set a global config for my arcade games (mame4all) ?
Or to some step by step guide usefull to set my controller? Tried many times also from retroarch menù controller settings, but i'm missing something because still no results.I have tried also "Core Input Remapping " from the same guide above, but I didn't found the same menù mentioned...
-
add: the problem is only with mame games, with n64 games everything works properly..could be a problem with my retropie nstallation?or missing bios?!
I've made the retroarch setup for input 30 times...!!!!!!!!! :-(
https://drive.google.com/open?id=0BwPG1so4QBZXVkMtSmRIV2txQWs
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.