MAME not working
-
Pi Model or other hardware: (3, model b)
Power Supply used: (Igloo)
RetroPie Version Used (4.2):
Built From: (Retropie 4.2, downloaded from official retropie site)
USB Devices connected: 1
Controller used: Gameshark ps2/ps3/pc controller
Error messages received: Just returns to home screen
Guide used: (Probably every single one on the internet)
Emulator: (All mame emulators)So for a long time noe i have tried getting MAME working. It was working in the start, but after I updated it, it didn't work. I use a romset of MAME 037b11 roms, but every time I try to access one, it just goes back to the home screen. I have tried to use all the emulators, but it doesn't work. The only solution I can think of is to restart Retropie, wich I dont want to do, since I have about 20 hours OOT and Pokemon.
-
@thebear123 Please don't post links to ROM sites, it's against the forum rules - remove the offending link from the post.
Have you read the https://retropie.org.uk/docs/Arcade/ page ? You most likely have a wrong romset for the emulator so check if you're using the right emulator for the romset you have.
-
@thebear123 next infraction will result in a permanent ban.
-
@thebear123 said in MAME not working:
but every time I try to access one, it just goes back to the home screen. I have tried to use all the emulators, but it doesn't work
If you do a search on this very forum, it will take you about 5 seconds to understand why. This has been asked thousands of times.
-
This post is deleted! -
This post is deleted! -
@loysight35 You're replying to 3+ years old topic and the poster hasn't been active for more than 2 years in the forums. Please don't necro-post by reviving very old topics.
-
@mitu they were inserting spam links into quoted text.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.