Xbox One S Controller Mapping wont work in Drastic

jonnykesh

@darkside1305 Weird that is reading the controller as a keyboard. Are you using xboxdrv by any chance?

DarkSide1305

I activated it, and deactivated it. No difference :/

jonnykesh

@darkside1305 Drop to the command line with the controller attached and run jstest /dev/input/js0 with the controller attached to see how it is being detected.

DarkSide1305

I see a shit ton of Butoons and almost everything says "Off" when i type that in.

jonnykesh

@darkside1305 try pressing some. Are all the buttons giving input?

DarkSide1305

Almost all my Buttons make a shit ton of these Number and Stuff appear. Only the Xbox Button and the Select button make an ^@

jonnykesh

@darkside1305 "numbers and stuff" that doesn't tell me if the buttons are being detected. Press A. Does one of them change from OFF to ON?

DarkSide1305

Gonna try that and tell you the Results.

DarkSide1305

Yes, every buttons turn on when i press them and off when i release then. Only the Xbox Button and Select Button wont work. And i have Xbox DVR disabled, because the Test doesnt show me Inputs when i have it activated.

jonnykesh

@darkside1305 That's why I was asking about xboxdrv as it can cause issues. Looks like the controller is fully recognised by the system it should just work with DraStic.
Try a different controller if you have one.

DarkSide1305

My Xbox 360 Controller works fine, but not my Xbox One Controller. I use it Wireless and its an Original Controller.

DarkSide1305

I also changed the /opt/retropie/configs/all/autostart.sh and added sudo bash -c 'echo 1 > /sys/module/bluetooth/parameters/disable_ertm' because i heard that Xbox One Controllers cant connect via Bluetooth when you havent added this.

DarkSide1305

This post is deleted!

DarkSide1305

So @jonnykesh you have no other Idea? Because, even going into /opt/retropie/configs/nds/drastic/config/drastic.cfg i only see 10xx Buttons for Controls, not any Buttons that are from my Controller, not even my working Xbox 360.

jonnykesh

@darkside1305 Sorry, no, DraStic should literally work with with any controller that you map to it, as long as it is recognised. The problem is on your end and specific to you or your controller unfortunately. Did you try another controller?

DarkSide1305

@jonnykesh Yes, my Xbox 360 Controller, which isnt even Original, works without Problem. Only my Xbox One S Controller wont work. Also, i just realised, Select works for activating the Screensaver, but not for opening Options.

DarkSide1305

And i just looked, its an Model 1708. Is that maybe the Problem?

jonnykesh

@darkside1305 Most likely. https://retropie.org.uk/forum/topic/9249/xbox-one-controller-not-recognized/2

DarkSide1305

@jonnykesh Im gonna give that Xpad Drive an try, and tell you the results afterwards.

jonnykesh

@darkside1305 Maybe something in here will help. https://github.com/RetroPie/RetroPie-Setup/issues/1277