Emulation Station stops responding at No Controllers Detected. Keyboard also halts.
-
Taking me forever to get back to this!! ......Helping me turn off the autoload was HUGE. Thanks!!! =)
Running dmesg -wH shows me all four controllers when I connect them by vendor, etc. Two of the controllers have errors, but I will deal with that later.
Here are the files.
Config.txt (isnt doing much )- https://pastebin.com/MhWTV7K3
FSTAB - https://pastebin.com/sDn0D4Wg
DMESG - https://pastebin.com/PBDLJ0DM (should I boot into RetroPie to get the output?) -
@rasp_renegade So the config file is stock, and so if the
/etc/fstab
file. I assume the external HDD is auto-mounted by the usbromservice since there's no entry in the/etc/fstab
file for it.
There is no specific error in the dmesg file, but it looks like your keyboard is registered twice. At this point, the only thing that comes into mind is that due to the high number of USB devices connected, the USB hub on the PI is not able to finish initialization during boot.
What happens if you boot normally - no USB devices connected - then attach the devices one by one, making sure that the USB HDD is the last device connected ? -
The second detection of the keyboard just as the USB drive is probed seems suspicious. That suggests to me that the USB ports are not coping with the load from the external USB drive.
I have a Pi 3 with the official power brick, a USB drive and a USB keyboard connected. If I try to plug in a DualShock3, my USB drive will either lose power (sudden drive parking) or will give USB errors.
Try to temporarily take the USB drive out of the equation entirely; test a boot from SD card with nothing but the keyboard connected. If the keyboard operates correctly (and is detected only once), then try to eliminate which component is causing issues, if not the USB drive as I suspect.
-
-
I tried booting with only the USB HDD, when it got to the RetroPie login I connected keyboard and typed emulationstation. I tried ES with and without the keyboard (unplug after typing emulationstation) but it freezes as soon as the Emulation Station splash screen appears.
I have tried 3 different USB HDD, all same symptoms. Every thing detects fine running in Raspian, so it is something not liking the app?
@psyke83 Do you mean boot into RetroPie from the SD card?
-
Close this thread. I threw that piece of crap away and just bought a new one. =/ Now I have to go through all the setup again.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.