Problem installing Mame 2010 (0.139)

matalog

Some of the log files had no contents - this one was there:

Log started at: Sun 22 May 23:52:06 UTC 2016
/home/pi/RetroPie-Setup/tmp/build/lr-mame /opt/retropie/supplementary/emulationstation

= = = = = = = = = = = = = = = = = = = = =
Getting sources for 'lr-mame' : MAME emulator - MAME (current) port for libretro
= = = = = = = = = = = = = = = = = = = = =

git clone --depth 1 "https://github.com/libretro/MAME.git" "/home/pi/RetroPie-Setup/tmp/build/lr-mame"
Cloning into '/home/pi/RetroPie-Setup/tmp/build/lr-mame'...
fatal: unable to access 'https://github.com/libretro/MAME.git/': Could not resolve host: github.com
/opt/retropie/supplementary/emulationstation

= = = = = = = = = = = = = = = = = = = = =
Building 'lr-mame' : MAME emulator - MAME (current) port for libretro
= = = = = = = = = = = = = = = = = = = = =

make: Makefile.libretro: No such file or directory
make: *** No rule to make target 'Makefile.libretro'. Stop.
make: Makefile.libretro: No such file or directory
make: *** No rule to make target 'Makefile.libretro'. Stop.
Could not successfully build MAME emulator - MAME (current) port for libretro (/home/pi/RetroPie-Setup/tmp/build/lr-mame/mamearcade_libretro.so not found).

Log ended at: Sun 22 May 23:53:46 UTC 2016
Total running time: 0 hours, 1 mins, 40 secs

I realise this is for the current version of mame - they both seemed to have the same problem though.

BuZz

https://retropie.org.uk/forum/topic/3/read-this-first

Use markdown to format your posts - see http://commonmark.org/help/ - and put large logs on a pastebin type site like http://paste.ubuntu.com/ http://pastebin.com/ or similar.

in that particular log it failed because you had a networking issue - the source never got downloaded.

matalog

I caught this at the end of a another attempt

alt text

BuZz

you ran out of memory (and crashed). lower gpu mem split (give minimum memory for gpu like 32MB) and increase swap - (in /etc/dphys-swapfile)

matalog

I changed gpu mem to 32mb and put CONF_SWAPSIZE=500 (from 100) in /etc/dphys-swapfile - this is still not working.

I found this log from before that is a lot bigger. link text

Flesy_

I´ve just installed mame2010 (3 days ago) and no problems with raspberry 3, also i updated scripts, it takes about 1hour and 15minutes full install.
But i have problem with second pad^^

BuZz

@matalog are you overclocked ?Did you disable overclocking ? If you have enough memory, you probably have an unstable overclock.

matalog

Because of the first answer I got, I removed the overclock instructions, my device shouldn't be overclocked anymore.

The last times I have tried this, it has continued for longer than usual, but it seems to be in a loop, I wouldn't have left it doing that for over an hour.

I'll start it up now and leave it to see.

Why would it take so long? Surely mame isn't that big?

dankcushions

@matalog said in Problem installing Mame 2010 (0.139):

The last times I have tried this, it has continued for longer than usual, but it seems to be in a loop, I wouldn't have left it doing that for over an hour.

i doubt it's in a loop. it hits those memory warnings as it compiles every driver, i believe. there are 100s and 100s of drivers.

I'll start it up now and leave it to see.

Why would it take so long? Surely mame isn't that big?

it is that big :) over an hour, as has been said.

matalog

I gave the program the required time to install (over an hour) and It is now working. Buzz, your answer last night was the solution - i just didn't give it enough time.

Should current mame install as readily as mame 2010?

Thanks for the help guys.

dankcushions

current mame is exponentially larger so will take even longer, and more memory, to build. like mame2010, it's probably not very usable on pis anyway.

GreenHawk84

Im trying to install Mame2010 right now and it is taking forever. It seems to be scrolling the lines but not doing anything else. Is this normal?

BuZz

It's compiling. It takes over an hour.

GreenHawk84

@BuZz said in Problem installing Mame 2010 (0.139):

It's compiling. It takes over an hour.

Thanks, its still running. Wow.

If I want to remove it, how do I uninstall an experimental package?

BuZz

Update RetroPie-Setup as automatic removal is included. You can also install that emulator from binary in the latest version, so no need to compile it.

mrvanes

I have updated Retropie-Setup this morning, but find no install from binaries in mame2010 installer, only from sources? I'm on a Pi Zero, but see no armv6 restriction in lr-mame2010.sh?