ORA Retropie image for the odroid Xu4
-
@darky2003 You already posted that https://retropie.org.uk/forum/topic/17362/odroid-xu4-input-signal-out-of-range-retropie-build - please do not post multiple times.
-
@darky2003 I would suggest that you familiarize yourself with a boom to a minimal. That is the base that is used with the xu4 per what is supported by odroid themselves. It leverages a boot ini file rather than a config file like the raspberry boards if you're familiar with those.
-
OK so it looks like this ISN'T working on EMMC. I just tried it on a EMMC and it loads the boot up screen fir a couple of seconds then goes to a black screen where it sits there. I just tried XU4-ORA-Base-RetroPie4.3.8-Public-v1.img. Any one else getting the same?
-
for those wanting a good aftermarket case for there odroid xu4s weve recently had this case released from hard kernal that is just amazing
features include
support for 2.5 inch internal hdd
4 front panel usb ports
power and user programable buttons on the front
all major io as well as sd slot accesable from rearand perhaps the most amazing feature thats never been seen before in a retropie case
front panel 2.4inch lcd for displaying system info system logos animations anything you can dream of
price currently 24 dollars
-
Having a little trouble with 4.3.9 v1.1 image
according to the change log point #5 "N64 LR-Mupen as default with exception to a few titles that are set to LR-Parallel when identified as a more pleasurable experience"
Where can I find that list of games changed? Moreover where can I find that file that to manually make its without going through runcommand everytime to verify what if Parallel is being used versus LR-Mupen?
Thanks
-
Are there any plans to get the Display of the OGST N64 Case working under this retropie image ? i would love to see this working becaus in my opition this image is way better than the ogst image. Really good work !!
-
@nad_22 at some point its not our highest priority because we didnt make the case at no point did the manufacturer even think to consult us as to wether wed like to support it and since the release they have reached out to us offering us the case to work on but still expect us to figure it out for ourselves well support it at some point but were not gonna keep delaying our releases for that screen weve halted eforts for over 6 weeks trying to get that screen working and all its done is break stuff left right and center so sod it were working on more important matters like getting sega saturn emulation working and the screen can either wait or hardkernal can get off there asses and help us support there case
-
Yeah like nad_22 I also bought the OGST N64 Case, but I wholeheartedly subscribe to your ORA image instead. However the case OGST has developed is absolutely stellar and i'd love to see your team be able to take advantage of the LCD on the front. If there is anything us plebs can do to help foster communications between your teams I would gladly entertain some time to doing so.
Keep up the fantastic work.
-
hello the sega saturn will be presented in the next update for the odroid xu4 a dev has been paid by the community odroid for it works on the compatibility in 32bit on the odroid xu4 how is it that on raspberry while the community is bigger there is nothing?
-
@astal79 said in ORA Retropie image for the odroid Xu4:
hello the sega saturn will be presented in the next update for the odroid xu4 a dev has been paid by the community odroid for it works on the compatibility in 32bit on the odroid xu4 how is it that on raspberry while the community is bigger there is nothing?
odroid xu4 has GLES 3.X. yaba-sanshiro, the only saturn emulator that is viable on ARM, requires GLES 3.X. raspberry pi only has GLES 2.X.
i have already approached the dev of yaba-sandiro some years ago about the potential of a GLES 2.X path - they said it's impossible. it's not a question of money or the community - the pi GPU is always the problem.
-
I noticed that defragmentating the drive is a feature. From what I have researched, this is only good for hard discs. Trimming is good for solid state devices.
-
I'm trying to access the Discord link from the top of the thread, but, I'm being informed it's invalid. Any update?
-
Well, as the Discord site is no longer valid, I'll post a couple of things here.
I had a working RetroPie on just a standard ODroid image. I decided to give this one a go. That may have been a mistake.
First - and most trivial - is that the wifi.sh script uses iwgetid which is not installed in the image. This was easy to fix by just installing the wireless-tools package. Otherwise an error is generated each time a game is run.
Next, and most serious, is that the MAME stuff doesn't seem to work well. On the standard setup I had, both mame2003 and the trunk made (lr-mame2003 & lr-mame I believe) worked. On this one they seem not too. mame2010 does for some ROM's, but it stretches the screen. I've tried running an update, but, it failed on lr-mame.
Compiling src/mame/drivers/bfm_sc2.cpp...
Compiling src/mame/drivers/bfm_sc4.cpp...
{standard input}: Assembler messages:
{standard input}:156114: Warning: end of file not at end of a line; newline inserted
{standard input}:156655: Error: ARM register expected -- `str'
g++: internal compiler error: Killed (program cc1plus)
Please submit a full bug report,
with preprocessed source if appropriate.
See <file:///usr/share/doc/gcc-5/README.Bugs> for instructions.
bfm.make:739: recipe for target '../../../../libretro/obj/libretro/src/mame/drivers/bfm_sc4.o' failed
make[2]: *** [../../../../libretro/obj/libretro/src/mame/drivers/bfm_sc4.o] Error 4
Makefile:130: recipe for target 'bfm' failed
make[1]: *** [bfm] Error 2
make[1]: *** Waiting for unfinished jobs....
Compiling src/mame/drivers/mpu4vid.cpp...
Compiling src/mame/drivers/mpu5.cpp...
Compiling src/mame/machine/mpu4.cpp...
Archiving libbarcrest.a...
makefile:1306: recipe for target 'linux' failed
make: *** [linux] Error 2
Removing additional swap
~/RetroPie-Setup
Could not successfully build lr-mame - MAME emulator - MAME (current) port for libretro (/home/pigaming/RetroPie-Setup/tmp/build/lr-mame/mamearcade_libretro.so not found). -
try looking for this on discord
ora-official
or find them on facebook.
i would post the link for discord but it is blocked
-
@astal79 are you saying that there will be a next release? I've almost given up on my xu4 thinking that the 3 people working on a stable, RPI-like experience for the Odroid moved on.
-
You haven't been paying attention then. Yes, there will be another release.
-
Is this the correct place to ask that the next image include the avahi packages?
-
Thank you so much for this. After trying to build an image myself from the instructions on the website and it failing at retroarch and emulation station I downloaded this and was up and running in no time
-
Cool i cant wait to test to get my odroid xu4 in a few days and run ora retropie, thanks for all thoses involved and hope this project keeps going, good luck!
-
@spitfyre1085 i just got my xu4 yesterday along with bt csr 4.0 and i couldnt connect my ps3 swan controllers there like thoses cheap copy controllers it took me about an hour, i couldnt get them to hook up so i removed my bluetooth then connected it back and they worked, it seems strange im use to the rpi3 but this is how i got mine to work.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.